PDA

View Full Version : Duo 2 with 2 dual tuners problems.


Scouser10
19-03-17, 21:03
Hi guys,

I've got a VU+ Duo 2 box with 2x dvb-s2 dual tuners and 4 lnb cables coming from my satellite but I can only record 2 things or watch 1 and record another when I try to watch or record a 3rd it says no free tuner. If I go into setup-service searching-signal finder it only shows tuner a and d, I have tried changing all the lnb wires into the back and I only get tuner a and d, is it something I have done or is there any settings I need to change.

Thanks
abu baniaz
19-03-17, 21:15
what have you configured tuners b and c as?
Scouser10
19-03-17, 21:36
They are all set to :-
Configuration mode - Simple
Mode - Single
Satellite - 28.2e Astra 2E/2F/2G
Send DiSEqC - no
bellejt
19-03-17, 21:58
what says info about your tuners ? Sure you have dual tuners ? With LNB ?
Stanman
20-03-17, 11:20
What does it say for signal stength for each of the tuners.

When you select one recording, are all channels active or are some greyed out.

Can you take a pic of the cable and tuner from the back

Sent from my SM-N9005 using Tapatalk
Scouser10
20-03-17, 19:37
53220
53221

All 4 say:-
Snr 99%
Agc 82%
Ber 0
abu baniaz
20-03-17, 19:45
Can you post a screenshot for following please?



Menu > Information > devices
All four your tuner configuration please
Scouser10
21-03-17, 21:11
Hope this helps.

53243

53244
abu baniaz
21-03-17, 21:28
Tuner configuration screenshots are missing.
You may wish to take screenshots using this guide:
http://www.world-of-satellite.com/showthread.php?44054-How-to-take-screen-shots-How-to-attach-files


After obtaining those screenshots,
Label all the wires, W1, W2, W3, W4.
Disable all the tuners (set to not configured)
Connect W1 to Tuner A (top slot of tuner card in slot A)
Configure Tuner A as simple, single, automatic.
Does it find 28.2?

Repeat with W2 connected to Tuner A, does it find 28.2?
Repeat with W3 connected to Tuner A, does it find 28.2?
Repeat with W4 connected to Tuner A, does it find 28.2?
MyVU
21-03-17, 22:32
Shouldn't Tuners B, C and D be set to "Equal to A"?
I'm only new to this and I've just set up my Duo2 with 1 dual tuner, and I had to set tuner A as normal and then set Tuner B to "Equal to A".
When I had them both set up similar to you I couldn't record while watching a different channel.
bellejt
21-03-17, 23:09
your tuners aree dual tubers ,so is right.Settings also are oke.Only thing we also need to now is the type of LNB you have ? Suppose there are no switches involved also.