PDA

View Full Version : What have I done wrong?


Wingding86
28-01-17, 23:11
Os mini arrived today and after a bit of time and following a guide I managed to get everything working or so I thought. Having problems with the following:

EPG- numbers wrong and programmes missing

Commentary- on some programmes mainly the movies, I've someone commentating on the movie

Oh and the last one was a message when trying to auto scan abm but I think because I'd already done this and it worked then it's maybe the case.

These were minor issues but then I tried reading and fixing. 523375233852339523405234152342

And when I tried to fix the epg or cross epg following another thread, it kinda freaked out, brought up some message and rebooted. Now I can't get all channels, mix between fta and premium missing. I've attached below pics to hopefully describe a bit better.

Sorry it's so much. Thought I was so close and just needing to choose how it would look in epg mode

Cheers


Sent from my iPhone using Tapatalk
Stanman
28-01-17, 23:31
Can you post settings of your ABM and tuner configuration.

For the voice over press audio and select the one with our NAR

Sent from my SM-N9005 using Tapatalk
Wingding86
28-01-17, 23:42
Thanks for the audio tip

5234352344523455234652347


Sent from my iPhone using Tapatalk
Wingding86
28-01-17, 23:54
52348

should be most recent crash log if ive attached correctly
abu baniaz
29-01-17, 00:07
What type of LNB do you have?
Do you have Sky Q?

Setup your tuner/s as simple,single,automatic.

Describe what happens afterwards.
abu baniaz
29-01-17, 00:10
If you want you Entertainment section to start at 101, the option for generating the main bouquet cannot be "yes (all channels)" Change it to "no", or "fta HD", or "HD".
Wingding86
29-01-17, 00:13
It's not sky q and I could run another cable from the lnb to another box if I decided. Changed the settings and they all failed and now saying satellite not connected.


Sent from my iPhone using Tapatalk
Wingding86
29-01-17, 00:14
It's not sky q and I could run another cable from the lnb to another box if I decided. Changed the settings and they all failed and now saying satellite not connected.


Sent from my iPhone using Tapatalk

That loses all the channels


Sent from my iPhone using Tapatalk
abu baniaz
29-01-17, 00:21
How many tuners do you have?
Do they all have a signal wire connected (direct to the LNB, no splitters etc). Sorry to ask, but need to make sure of a few things.
Wingding86
29-01-17, 00:24
It's a single tuner. Have one wire directly into normal box and then the other into to os which sits beside it. Was the same way with the openbox. Sometimes I'll need to power the normal box off but very rarely. No splitters or anything.


Sent from my iPhone using Tapatalk
abu baniaz
29-01-17, 00:29
Signal wire needs to be direct to the LNB. If it goes through another receiver/switch, it wont lock onto the transponder it needs unless the other one is too.

Connect the cable directly into receiver, even if just for now.

I can't see the other settings properly, (this is why we ask for debug logs).

You don't need to enable the Ireland provider or Freesat ones. In the config menu for ABM, enable the "not-indexed" channels.
Wingding86
29-01-17, 00:38
Yeah I've got all the channels back that I had before, will I need to keep it like that? I used the other one for series links and what not. Just missing some programmes on the epg still. Where is the debug log? Sorry for all my questions


Sent from my iPhone using Tapatalk
abu baniaz
29-01-17, 00:48
Your EPG data may be corrupt. Install this plugin/script. After restart re-run CrossEPG Downloader.
http://www.world-of-satellite.com/showthread.php?52890-Remove-EPG

See this thread, explain debug logs too.
http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions

You may want to look at this too:
http://www.world-of-satellite.com/showthread.php?44054-How-to-take-screen-shots-How-to-attach-files

Two receivers cannot share an LNB (unless it is unicable). Would be better to use the osmini for everything.
abu baniaz
29-01-17, 00:58
Your ABM placement should be at the top
Wingding86
29-01-17, 01:25
52349

abm debug log
abu baniaz
29-01-17, 01:34
That log does not show you running ABM
Wingding86
29-01-17, 01:41
I think I jumped the gun there. Deleted like you said and sent log before running it again. Have majority of it all showing now and same in epg after I rebooted


Sent from my iPhone using Tapatalk