PDA

View Full Version : [ABM-DVB-S/S2] ABM HD channel swap not working on latest Edision Mini OS Vix Image


rowladar
27-01-17, 21:09
Hi,
I've just updated my pal's Edision mini os to the latest available Vix image and (apart from the restore wizard not being compatible from the previous image meaning I had to ) it all went well but the channel swap for HD channels is not working correctly... it is replacing every channel with it's HD equivalent in the bouquet regardless of whether the HD channel works or not... before the upgrade it only swapped the working HD channels...

any ideas?
dsayers
28-01-17, 00:41
Did you choose you area custom not sd or HD?
Sicilian
28-01-17, 08:41
Working fine here using London Custom.
rowladar
28-01-17, 09:17
yep I did... also tried all other combinations
rowladar
28-01-17, 09:19
Working fine here using London Custom.

Hi - could you send some screen shots of the ABM configuration menus?
abu baniaz
28-01-17, 09:23
You are meant to attach your debug logs fro ABM questions. Otherwise lots of questions trying to figure out what you have set.

See these threads please:

http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions

http://www.world-of-satellite.com/showthread.php?47834-ABM-How-to-exclude-unavailable-HD-channels
rowladar
29-01-17, 01:10
You are meant to attach your debug logs fro ABM questions. Otherwise lots of questions trying to figure out what you have set.

See these threads please:

http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions

http://www.world-of-satellite.com/showthread.php?47834-ABM-How-to-exclude-unavailable-HD-channels

I would include logs but I am not at my friend's house! I had chosen the Custom option but it had no effect.
Huevos
29-01-17, 01:26
If you can't post logs we can't help you. The debug logs tell us everything in a few seconds without the need for 50 posts to fill in all the missing information.
rowladar
31-01-17, 20:13
You are meant to attach your debug logs fro ABM questions. Otherwise lots of questions trying to figure out what you have set.

See these threads please:

http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions

http://www.world-of-satellite.com/showthread.php?47834-ABM-How-to-exclude-unavailable-HD-channels

OK -here is debug attached52380
(the one timestamped 19:21... I uploaded an earlier one by mistake first time round)

IGNORE THIS POST - I WILL ADD A NEW POST WITH THE CORRECT LOG SHORTLY
Huevos
31-01-17, 20:23
The debug log is supposed to contain the ABM scan.
rowladar
31-01-17, 20:36
I would include logs but I am not at my friend's house! I had chosen the Custom option but it had no effect.

ok I believe that this is the log you are looking for...
52381
Huevos
31-01-17, 20:53
Ok, I give up.
rowladar
31-01-17, 21:08
Ok, I give up.

Why?... I've done what you asked...
I've turned on logging and restarted the GUI and then posted the log. Is that not what you asked for?
I'm sorry if that isn't everything but that is all I was told to do - if I knew exactly what I was supposed to be doing I wouldn't be asking on the forum!
Huevos
31-01-17, 21:12
The debug log is supposed to contain the ABM scan.Is this not clear?
rowladar
31-01-17, 21:58
Is this not clear?

I followed the instructions previously supplied...

All ABM support questions must be accompanied by a debug log of the scan.

Debug logging is enabled as follows:
Menu -> Setup -> System -> Logs -> Enable debug logs = yes, and then GUI Restart.

is there another step I am supposed to make - have you actually looked at the log I provided?
Ashley69
31-01-17, 22:07
Did you run a scan after enabling debug logs?
Huevos
31-01-17, 22:14
have you actually looked at the log I provided?Yes. The idea is you enable debug logs and do a GUI restart. Once debug logs are active you do an ABM scan and post the corresponding debug log.
rowladar
31-01-17, 22:45
Yes. The idea is you enable debug logs and do a GUI restart. Once debug logs are active you do an ABM scan and post the corresponding debug log.

Ok - then I will have to go round to my mate's house again tomorrow and do this extra step...

Does the log have a particular name or will there be only one log file in the log directory?
rowladar
01-02-17, 21:00
OK - time for a confession...
neither me nor my mate realised that the "London Kent Custom" option existed... we thought that the "custom" reference was referring to one of the lines further down in the config. I've now selected this correctly and it all works as expected.

Sorry to have wasted everyone's time on this forum but it was good to get a better understanding of how it all works.

cheers