PDA

View Full Version : [VU+ Duo2] Problem with more than one channel in parallel


2stein
25-01-17, 09:22
after i online updated from 023 to 026 i have a problem with receiving more than one channel in parallel or concurrently watching the same channel while it's being recorded.
let's say:
1. timer started recording channel a. i can watch all other channels but channel a. a is black. when i manually stop recording, channel a comes back for live viewing.
2. timer started recording channel a. when a second channel b starts recording, recording of channel a terminates.
went back to 023 and everything is fine again.
saw that new drivers were imported between 023 and 026.....
Bangord30
25-01-17, 09:43
Make model of receiver???

Sent from my HUAWEI VNS-L31 using Tapatalk
2stein
25-01-17, 09:49
[VU+ Duo2] Problem with more than one channel in parallel
bellejt
25-01-17, 10:52
no probs here on duo 2.Maybe do a couch flash with restore.
Bangord30
25-01-17, 13:19
I'm on .27 now and never had that either

Sent from my HUAWEI VNS-L31 using Tapatalk
2stein
25-01-17, 13:21
ok, i guess couch flashing 027 is a good suggestion... i couch flashed 023 as well. thanks.
Bangord30
25-01-17, 13:36
Maybe not then restore settings but of course try one first

Sent from my HUAWEI VNS-L31 using Tapatalk
2stein
28-01-17, 16:13
couch flashed 028... restored settings... same problem.
then investigated tuner configuration and found out that my inverto unicable lnb had become a dura-sat lnb and all tuners were configured to use scr1.
after i changed back to inverto and different scrs it works as before. :-)
TK4|2|1
28-01-17, 16:33
couch flashed 028... restored settings... same problem.
then investigated tuner configuration and found out that my inverto unicable lnb had become a dura-sat lnb and all tuners were configured to use scr1.
after i changed back to inverto and different scrs it works as before. :-)

Same happened to me.
2stein
28-01-17, 16:44
in the log it says that they are using different unicable/jess code now... obviously the tuner configuration settings are interpreted differently by this code.