Fallback Receiver Streaming not working

[imish]

Setup

Mutant1500 - Primary Box
Miracle micro - Slave Box

Slave connected to primary via ethernet and acts as slave. Slave has no tuners connected.

Setup worked perfectly for months, upgraded to .26 and now the slave unit doesn't display any channels (stuck on openvix wallpaper).
recordings work perfectly fine.

Using OpenWebIF on primary I have verified that streaming of channels is working perfectly fine.
Using OpenWebIF on slave the channels do not stream.

Any ideas?

[DaMacFunkin]

try typing in the full url and port number, for example:
http://192.168.1.123:8001
instead of just
192.168.1.123

[bellejt]

just updated my vu duo2 also and not working to.I will try a new flash from 023 and see.Fresh flash usb fall back tuner is not working.Streaming to PC works

[imish]

try typing in the full url and port number, for example:
http://192.168.1.123:8001
instead of just
192.168.1.123

under fallback receiver?

[bellejt]

did that.Not working either.Opened a topic on image software bug.

[ccs]

Debug logs?

[bellejt]

no debug logs possible cause box does nothing wrong. Just when using fallbacktuner it seems that the tuner from remote reciever is not called.I have 2 duo2's and see if the tuner gets activated.From PC yes ,from second duo2 not.

[ccs]

.... something must be going wrong.

[bellejt]

returned to 023 and al is fine on second box.Mainbox is still on 026

[bellejt]

just noticed that on earlyer versions port is :08001 .Maybe that would work ?

[twol]

try http://IP_main_box:8001/

[bellejt]

working fine now als you said : http://main box IP:8001 .

[imish]

try http://IP_main_box:8001/

worked, tough to keep track of changes between versions.

[ccs]

try http://IP_main_box:8001/
Just for my benefit, is the trailing "/" significant, otherwise, isn't the answer in post #2 ??

[twol]

No its not ...

[ccs]

No its not ...... so the answer was in post #2.