PDA

View Full Version : [ET8500] Missing some chanels only when recording


Legacy7770
09-01-17, 21:16
Hello everyone hopefully someone can help me out with this problem.
I've just noticed when I'm recording say channel 5 and go to watch say discovery it's not got a signal.
There are several chanels missing stop recording and they all come back.
Any help would be much appreciated Thanks Steve
twol
09-01-17, 21:19
What is the config, what softcam is in use
systemlord
09-01-17, 21:29
Try a different cam, so if you're on oscam try mgcamd.
Tkr001
09-01-17, 22:16
I would never recommend moving from Oscam to any other cam!
DaMacFunkin
10-01-17, 08:29
You don't say how many Tuners you have? In your case this is important and could be the cause of what you are seeing.
Trial
10-01-17, 09:25
Hi,
not only tuner but also how much independent cables from the dish.

ciao
Legacy7770
10-01-17, 14:31
Hi everyone I've got two tuners on my xtrend et8500 and two cables from my twin lnb.
Thanks again Steve
Bangord30
10-01-17, 14:35
Post pics of your tuner configs
Legacy7770
10-01-17, 19:57
Hello everyone thanks again for all the replys. Just a quick update on the problem it looks like if I recored chanel 5 I lose a couple of other chanels. This only happens when I recored chanel 5. if I record a different chanel there's no problem any help would be much appreciated Thanks Steve.
twol
10-01-17, 20:21
Are you using a softcam?
Legacy7770
10-01-17, 20:33
Yes I'm using oscam. I rolled back 4.021 from 4.023 but had the same problem. Can someone please post up their tuner configuration??
Yours sincerely Steve Evans Steve
abu baniaz
10-01-17, 20:38
No point anybody posting their tuner configuration. It might be different to what you have connected to your receiver.

Say what you have connected to Tuner A. Full details please.
Say what you have configured tuner A as. Full details and a picture if possible.

Separate answer for all other tuners may be better for you.
Legacy7770
10-01-17, 21:23
52079
Hello everyone here my tuner a and b setups
Yours sincerely Steve Evans
abu baniaz
10-01-17, 21:28
Both wires go to an LNB pointed to 28.2?
No splitters/switches etc?
twol
10-01-17, 22:02
Can you set prefered tuner for recording to tuner B, record ch5 and see what happens:)
(Setup/system/customise)