View Full Version : front lcd small gap showing tv channel
51709
got a small gap all around the lcd display that is the tv channel on tv
any ideas to sort out?
reset it and on boot up , the small gap still there on any lcd skin setting. seems needs to be set like user settings for gui? wide height etc
Never found a way around it when had mines. Posted here and on other forums. No gui/positions settings seem to touch that
yep, making my ocd go mad, as a big black square and bootup logo in back
like someone has sized the screen wrong in settings? like 4.25 not 4.3
http://www.world-of-satellite.com/showthread.php?52750-User-interface-position-needs-resetting-every-day/page5
i have a 65inch tv and have had to bring in the sides of my user settings as missing the M of menu in top left
i bet this is a problem
even setting tv output to 1080p its ONLY 720p on user settings and skin setup
ok its a bug:
go menu > setup >system >
user interface > position setup >
click yellow for defaults and screen goes back to normal, but i miss half of the red button on bottom left and 5px of the letters
but when i come out, the 3mm gap on lcd is gone, so its overscan of something problems
now i go back to 1080p and pick a channel the gap is back!!!
51710
posted on xtrend site, but be great if the vix guys can look at it. not skin related as i tested 10 skins and the same
even on boot up you can see the gap and in the back the snow leopard boot logo
My actual tv was fine after a Vix update, even on reboot, everything fitted fine like it used to. But the little screen never was full screen if I remember right. On my old 720p Bravia overscan can't be turned off apparently
51710
posted on xtrend site, but be great if the vix guys can look at it. not skin related as i tested 10 skins and the same
even on boot up you can see the gap and in the back the snow leopard boot logo
Yeah agree not Vix fault as I tried other image too
you have 2 choices.
1. fix overscan on your TV
2. write down the changes when you modify the receiver in user interface/position setup
Then reset to defaults & reboot
Then enter written settings and save.
As long as you do not reboot you will not see the live TV around the edges.
E2 reboot is fine.
installed openatv and working with no gap on all channels
fixed boot up as well
51711
installed openatv and working with no gap on all channels
fixed boot up as well
51711
which lcd skin???
default on
just re flashing as some reason still mgcamd prob
seems to be all sorted on cccam, but cant for the life of me ( should know after 8 years ) how do i get the dish up in top right moving on openatv lol
top left i mean when ur moving sat to sat
Sorry can you clearly state what you are trying to do:)
when you go to move sat from 28.2 to 13 east i used to have a dish pop up on vix in top left saying 28.2 moving to 13e and a count down in secs to move
in the old days you had to add this as a plugin, but now as i moved to openatv to get rid of the gap problem, when i move my motor dish, i dont have anything on screen telling me dish is moving
There's a setting somewhere I'm sure
randomly its came back :) in ocd there is a flashing or off flashing when moving and was on flashing but after a reboot all good
cable sat all ok and no gap on any skin or lcd skin, so is a vix problem?
5 days and still going great, maybe vix can look into why a gap
running perfect on openatv
5 days and still going great, maybe vix can look into why a gap
running perfect on openatv
I have sent you a PM :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.