front lcd small gap showing tv channel

[river-rat]

51709

got a small gap all around the lcd display that is the tv channel on tv
any ideas to sort out?

[river-rat]

reset it and on boot up , the small gap still there on any lcd skin setting. seems needs to be set like user settings for gui? wide height etc

[Bangord30]

Never found a way around it when had mines. Posted here and on other forums. No gui/positions settings seem to touch that

[river-rat]

yep, making my ocd go mad, as a big black square and bootup logo in back

like someone has sized the screen wrong in settings? like 4.25 not 4.3

http://www.world-of-satellite.com/showthread.php?52750-User-interface-position-needs-resetting-every-day/page5

i have a 65inch tv and have had to bring in the sides of my user settings as missing the M of menu in top left
i bet this is a problem

even setting tv output to 1080p its ONLY 720p on user settings and skin setup

[river-rat]

ok its a bug:

go menu > setup >system >
user interface > position setup >

click yellow for defaults and screen goes back to normal, but i miss half of the red button on bottom left and 5px of the letters

but when i come out, the 3mm gap on lcd is gone, so its overscan of something problems

[river-rat]

now i go back to 1080p and pick a channel the gap is back!!!

[river-rat]

51710

posted on xtrend site, but be great if the vix guys can look at it. not skin related as i tested 10 skins and the same
even on boot up you can see the gap and in the back the snow leopard boot logo

[Bangord30]

My actual tv was fine after a Vix update, even on reboot, everything fitted fine like it used to. But the little screen never was full screen if I remember right. On my old 720p Bravia overscan can't be turned off apparently

[Bangord30]

51710

posted on xtrend site, but be great if the vix guys can look at it. not skin related as i tested 10 skins and the same
even on boot up you can see the gap and in the back the snow leopard boot logo
Yeah agree not Vix fault as I tried other image too

[twol]

you have 2 choices.
1. fix overscan on your TV
2. write down the changes when you modify the receiver in user interface/position setup
Then reset to defaults & reboot
Then enter written settings and save.
As long as you do not reboot you will not see the live TV around the edges.

E2 reboot is fine.

[river-rat]

installed openatv and working with no gap on all channels
fixed boot up as well

51711

[twol]

installed openatv and working with no gap on all channels
fixed boot up as well

51711

which lcd skin???

[river-rat]

default on

just re flashing as some reason still mgcamd prob

[river-rat]

seems to be all sorted on cccam, but cant for the life of me ( should know after 8 years ) how do i get the dish up in top right moving on openatv lol

[river-rat]

top left i mean when ur moving sat to sat

[twol]

Sorry can you clearly state what you are trying to do:)

[river-rat]

when you go to move sat from 28.2 to 13 east i used to have a dish pop up on vix in top left saying 28.2 moving to 13e and a count down in secs to move

in the old days you had to add this as a plugin, but now as i moved to openatv to get rid of the gap problem, when i move my motor dish, i dont have anything on screen telling me dish is moving

[Bangord30]

There's a setting somewhere I'm sure

[river-rat]

randomly its came back :) in ocd there is a flashing or off flashing when moving and was on flashing but after a reboot all good

cable sat all ok and no gap on any skin or lcd skin, so is a vix problem?

[river-rat]

5 days and still going great, maybe vix can look into why a gap
running perfect on openatv

[twol]

5 days and still going great, maybe vix can look into why a gap
running perfect on openatv

I have sent you a PM :)