View Full Version : Solo2 loss of all channels
Don Ricardo
16-12-16, 12:33
Hi I have lost all my channels (28,2E Sky UK) after I flashed 'Black Hole 3.0.2_vusolo2' ,when I do a search it shows the sat with good signal , but when I do a Service Scan, it tells me no channels are found. I have re flashed, but I still get the same results. Help please anyone
We are all running OpenViX here.
get yourself on openvix, you want regret it
Don Ricardo
16-12-16, 14:42
Have just flashed open vix 4.2.021, done service scan on 28.2E astra DVB-s & s2 no channels found !
what softcam you using? what is tuner setup?
Don Ricardo
16-12-16, 16:30
Tuner B on simple with tuner a on loop through
Soft Cam Enigma 2 plug in Cams CCcam 23010 Feb 2015
Andy_Hazza
16-12-16, 17:20
Why loopthrough? Do you not have a twin feed? (Meaning 2x satellite cables coming into the receiver)
Sent from my iPhone using Tapatalk
setup tuner A & B to single simple 28.2e and rescan with ABM. if this doesn't work, then its down to the cam you are using
A cam has nothing to do with not receiving channels - read the first post "no channels found". The tuner config is correct if it is a single feed but it should still find some channels in any case.
What signal levels are you getting in satfinder.
Also if only one cable set tuner B as disabled.
Sent from my SM-N9005 using Tapatalk
Don Ricardo
18-12-16, 12:15
Signal level is 90% Quality is 74% However is still shows NO channels found after scan.
IF you have only one physical cable, disable all other tuners even loop through and try again
Sent from my SM-N9005 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.