IP address change

[MrBadGuy]

Hi using technomate nano se and just tried connecting with lap top on the normal IP address but would not connect due to the last number on IP address has changed is this normal
Thankyou
MrBadGuy

[Joe_90]

Your home router usually assigns IP addresses. Depending on how log it has been since the last connection to the network the router may issue a new one. One way to fix this is to assign a static IP address in your router using the MAC address of your Technomate.

[bellejt]

or just set a fixed ip in your box.

[birdman]

or just set a fixed ip in your box.and, if you do that, make sure it is one which is not in the range assigned by your router's DHCP service.

[Joe_90]

or just set a fixed ip in your box.


and, if you do that, make sure it is one which is not in the range assigned by your router's DHCP service.
The very reason I didn't suggest it! The way the OP phrased the question suggested that the simplest solution was to ensure that the router looked after the IP address handling.

[MrBadGuy]

Hi
sorry for delay in replying thanks to all who replyed
just puzzled me as day before fileziller picked it up on
old ip address then had to change last number day after
on fileziller once again thankyou for advice
MrBadGuy