View Full Version : Help! No channels at all
Hi all,
Recently bought a TM-NANO-SE-M2 Plus (so I hope this is the right sub-forum) but am really having trouble even getting FTP to air. It's scanning and finding zero channels. I believe I've set everything up correctly for my area (BS37 5TP, network id 40970 symbol rate6952)
I have one virgin cable coming into property (no dish) so have used a splitter with one cable going into the router, and one into the Input plug (top one). I was told that I still only need the one input to use dual cable (so can watch one channel record another?)
Done network checks and no issues there.
This is before even trying to set up CCcam, but I am pretty sure I've done that correctly through Filezilla, and downloaded Softcam. I also think I've set up the HDD properly, as well as the EPG section.
I'm getting nowhere fast and very frustrated so any help would be great. Complete newbie to this but not a technophobe, I know my way around kodi etc but this is next level!
Andy_Hazza
15-10-16, 17:50
To watch one and watch another you would need a loopthrough cable from Tuner A to Tuner B. Anyhow if you are getting zero channels your Net ID must be wrong. Leave the Net ID blank in your Tuner Configuration. You will just put the Net ID in when you setup ABM. What is your Tuner Configuration?
Sent from my iPhone using Tapatalk
http://uploads.tapatalk-cdn.com/20161015/6fb13ce5994f368c83c4c263e6182c19.jpg
Sent from my SM-N930F using Tapatalk
http://uploads.tapatalk-cdn.com/20161015/20836c34b998ea1c86ea588098fd4909.jpg
Sent from my SM-N930F using Tapatalk
http://uploads.tapatalk-cdn.com/20161015/8c82654a5f5ce943314e854079327f77.jpg
Sent from my SM-N930F using Tapatalk
Sorry for sideways view..
Sent from my SM-N930F using Tapatalk
Andy_Hazza
15-10-16, 19:23
In Tuner B have the Net ID as all zero's. you didn't change anything else in there did you?
What area are you in and are you sure that is the correct Net ID?
Sent from my iPhone using Tapatalk
Andy_Hazza
15-10-16, 19:24
Btw, Webif is better for taking pictures. :)
Sent from my iPhone using Tapatalk
Yate. Postcode Bs37 so have used Bristol settings. Don't think I have no
Sent from my SM-N930F using Tapatalk
Andy_Hazza
15-10-16, 20:21
Do you have an original Tivo box so you can get the correct Net ID? If not it will be trial n error I'm afraid. I presume you are using ABM (AutoBouquetsMaker) to create your Virgin Bouquet lists?
Like I've said put all zero's in the Net ID in your Tuner Configuration settings, green button to save. Then while in Service Searching go into ABM. Use expert mode in Configure. Schedule a scan to run daily at 03:45 in the morning. Green button to save. In Providers is where you will put your Net ID and configure how you want your Bouquets to look then green button to save. Then Start Scan. This is where you are going to have to try different Net IDs if you can't find the correct one from the Tivo box.
Good Luck!
Sent from my iPhone using Tapatalk
To watch one and watch another you would need a loopthrough cable from Tuner A to Tuner B. Anyhow if you are getting zero channels your Net ID must be wrong. Leave the Net ID blank in your Tuner Configuration. You will just put the Net ID in when you setup ABM. What is your Tuner Configuration?
Sent from my iPhone using Tapatalk
This is wrong into. Tm-nano-se-m2 plus has a twin cable tuner. Only needs on feed to top input!
Sent from my iPhone using Tapatalk
Rob van der Does
16-10-16, 06:25
Btw, Webif is better for taking pictures. :)
And they should be uploaded as attachment to the post, not using a live external link.
http://uploads.tapatalk-cdn.com/20161015/6fb13ce5994f368c83c4c263e6182c19.jpg
Sent from my SM-N930F using Tapatalk
Set Tuner C exactly how you've set Tuner B.
Just tried that. Reset net ids to zeros. Still nothing
Sent from my SM-N930F using Tapatalk
https://vimeo.com/187527536
Sent from my SM-N930F using Tapatalk
Use Autobouquetsmaker http://www.openvix.co.uk/index.php/guides-and-tutorials/video-guides/
Andy_Hazza
16-10-16, 11:12
Just tried that. Reset net ids to zeros. Still nothing
Sent from my SM-N930F using Tapatalk
I told you what to do in Post #10
Sent from my iPhone using Tapatalk
Do you have an original Tivo box so you can get the correct Net ID? If not it will be trial n error I'm afraid. I presume you are using ABM (AutoBouquetsMaker) to create your Virgin Bouquet lists?
Like I've said put all zero's in the Net ID in your Tuner Configuration settings, green button to save. Then while in Service Searching go into ABM. Use expert mode in Configure. Schedule a scan to run daily at 03:45 in the morning. Green button to save. In Providers is where you will put your Net ID and configure how you want your Bouquets to look then green button to save. Then Start Scan. This is where you are going to have to try different Net IDs if you can't find the correct one from the Tivo box.
Good Luck!
Sent from my iPhone using Tapatalk
I don't have a tivo box will try the other steps now
Sent from my SM-N930F using Tapatalk
http://uploads.tapatalk-cdn.com/20161016/0522488b6b97c9cfd65a9c0727820ebc.jpg when going into ABM. The scan was saved for 4am but adjusted
Sent from my SM-N930F using Tapatalk
I can't even scan in ABM now. Rebooted and tried
Sent from my SM-N930F using Tapatalk
Every time I try to enter providers in ABM its crashing out.
Sent from my SM-N930F using Tapatalk
Rob van der Does
16-10-16, 12:03
I asked you before to attach pictures to the post.
Btw, Webif is better for taking pictures. :)
And they should be uploaded as attachment to the post, not using a live external link.
Please, obey our forum rules; external links are not allowed.
It's the picture tool within the app? Seems a bit odd not to allow something within an app you use...but ok I'll try and do it I'm at my wits end with this box to be honest
Sent from my SM-N930F using Tapatalk
USB re-flash it and setup fresh. Leave both the tuners set to default DVB-C.
How to flash http://www.openvix.co.uk/openvix-builds/Guides%20and%20Tutorials/Flashing%20Guides/How%20to%20flash%20a%20TM-Nano-SE.pdf
Images http://www.openvix.co.uk/index.php/downloads/technomate-images/tm-nano-se-m2-plus/
Dont install any skins until you got it setup.
Do you think that's the only solution? Really not keen on the idea of flashing...this was out of the box new, all I've tried to do was add my line and find channels...in ABM it was finding I think around 380 channels but nothing came into epg. Stressing me out man...thanks everyone for help
Sent from my SM-N930F using Tapatalk
Rob van der Does
16-10-16, 14:37
Stressing me out man...
Don't let that get under your skin. Enigma boxes are for hobbyists; if you're not one, or just trying to become one, take things easy and do one thing at a time.
I bought a zgemma h2h first time but wasn't happy without the dual cable aspect. The thing is that tuned and found channels straight away, which makes it all the more frazzling!
Sent from my SM-N930F using Tapatalk
all I've tried to do was add my line and find channels
in before the lock...
Please post photos how the unit is connected to your feeds.
Also photos of each of your tuner settings.
5093950940
Sent from my SM-N930F using Tapatalk
I've attached these hopefully correctly....
Sent from my SM-N930F using Tapatalk
in before the lock...
Sorry do you mean the box is locked?
Sent from my SM-N930F using Tapatalk
i see you mention getting channels in the scan ,other things would need to be added to get epg,maybe something like epg refresh,glad you moved from crap box to a better one:thumbsup:
Still using lines, though ...
DaMacFunkin
17-10-16, 07:23
Sorry to chip in with this but,
Should we be providing support to people who can't check their net id because they don't have an official box.
If they don't have an official box they don't have a valid subscription
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.