View Full Version : [GiGaBlue HD-X1] Looking for a link to download open vix 3.2.003 for the gigablue x3
Looking for a link or file to get open vix 3.2.003 for my gigablue x3. I cannot get the ABM to keep sky channels it loses them after 10days and then can't find them. Reading other posts looks as if they resolved the issue by going back to above open vix that I requested
Cheers
Andy_Hazza
16-08-16, 20:53
Are you sure as ViX 3.2.xxx isn't available for the Gigablue HD-X3. HD-X1 yes but not HD-X3.
Sent from my iPhone using Tapatalk
abu baniaz
16-08-16, 20:53
The X3 is a new receiver, the oldest image is
openvix-4.1.011.release-gbx3_usb.zip
Andy_Hazza
16-08-16, 20:54
Looking for a link or file to get open vix 3.2.003 for my gigablue x3. I cannot get the ABM to keep sky channels it loses them after 10days and then can't find them. Reading other posts looks as if they resolved the issue by going back to above open vix that I requested
Cheers
Can't lose channels like that, must be a user setup error.
Sent from my iPhone using Tapatalk
I have tried different builds I posted a log in ABM section, in ABM it just says cannot read data when searching sky channels, tried on latest open vix build and had to go to 4.1.011 to get it reading sky on abm
It was an x1 post I was reading and I was getting the same symptoms on the x3
abu baniaz
16-08-16, 21:06
Your ABM issue is not Sky UK, but Virgin.
You could have an issue with your signal.
On setup I tried a few different things I disabled the cable tuner and just setup on the satellite tuner it still had the same issue on ABM "cannot read data" I could see all the channels on a manual scan it just wouldn't do it on ABM. On disabling the satellite tuner and enabling the cable tuner it worked fine.
abu baniaz
16-08-16, 21:37
Your log showed you scanning three providers. Try them separately and see how you go.
Will do, my cable tuner is a TWIN DVB-C-T/T2 HYBRID TUNER if that clears up the three providers scanning?
Will do, my cable tuner is a TWIN DVB-C-T/T2 HYBRID TUNER if that clears up the three providers scanning?
I've had one on test in an X3 for a few days now, no issues so far. ABM scan every 24 hours and I've been running ABM manually too. Try adding an attenuator to your feed.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.