No picture on TV whilst recording

[sarntech]

The mini display is showing the channel details and is flashing "recording". There is no picture on the TV however.
I can get the picture once the recording has finished - I have twin satellite tuners and internal HDD.
Please help :confused:

[Bangord30]

This on a 8500? Sorry on my mobile. On both channels? You're definitely on Vix yes lol? There's an ATV similar issue just now

[sarntech]

Yes on 8500 and on Vix.

[cactikid]

might be a 1 only supplied feed recordings take first priority over viewing ,other tuners not setup correctly if cables installed?

[Bangord30]

Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard

[sarntech]

Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
Both tuners set as
Simple
Single
28.2

[sarntech]

Both tuners set as 28.2 simple and a coax going into each? You played with recording settings? Just leave as standard
I have "recordings always set have priority" set to Yes.
How can I make settings as standard?

[cactikid]

not said how many tuners on box or wired up?

[sarntech]

not said how many tuners on box or wired up?
Twin satellite tuners with coax to each. internal HDD

[Bangord30]

Guys on here always recommend standard options. I can't mind them off top of my head. Factory reset would but a bit much I know. Maybe cacti can confirm his.

[sarntech]

Guys on here always recommend standard options. I can't mind them off top of my head. Factory reset would but a bit much I know. Maybe cacti can confirm his.
I don't think I've altered any settings but could be wrong.

[cactikid]

no dont factory reset ,each tuner setup on 28.2? and using latest cams 1.38 or 2.30?

49413


like on C and D

[twol]

What does the Lcd display show for channels?
White is in use, red recording.... Anot showing then its free tomuse.

[sarntech]

no dont factory reset ,each tuner setup on 28.2? and using latest cams 1.38 or 2.30?

49413


like on C and D
My tuner setup looks exactly like your C and D above.

[sarntech]

What does the Lcd display show for channels?
White is in use, red recording.... Anot showing then its free tomuse.
LCD is flashing "recording",' channel details (BBC 1 Olympics), and the letters A and B in red.

[cactikid]

2 tuners in recording mode if both are in red,did you setup a timer or autotimer?

[sarntech]

2 tuners in recording mode if both are in red,did you setup a timer or autotimer?
A and B are both in red.
Autotimer.

[cactikid]

if you set a timer or autotimer for box to record on 2 channels on 2 tps you are not allowed to view any other channel,red button scroll down you will see list greyed out=no entry,others not greyed out can be viewed because there on same tp as channels recorded.

[abu baniaz]

I'm guessing you are using CCcam. If so, you need version 2.30 in order to decode two or more channels simultaneously.

Sent from my XT1032 using Forum Fiend v1.3.3.

[abu baniaz]

Please ignore, just saw that you are watching FTA channel.

Sent from my XT1032 using Forum Fiend v1.3.3.

[sarntech]

if you set a timer or autotimer for box to record on 2 channels on 2 tps you are not allowed to view any other channel,red button scroll down you will see list greyed out=no entry,others not greyed out can be viewed because there on same tp as channels recorded.
I was recording 2 programmes at the same time :o
I've deleted 1 recording and now I can view on the other.
Sorry for the confusion.

[cactikid]

no confusion at all on your new toy and wondered why a blank screen:eek:,remember you can view the recordings on hdd while your box records the other 2 channels.:thumbsup: