View Full Version : Picons - how to install and display
I've downloaded the pre-installed picons but can't get them to display.
Can someone please help me with picon recommendations and how to install them if they are not part of the pre-installion?
Thanks
You need to ftp the picon folder over to the root of your USB/Flash/HD. Personally I store them on USB to save spinning up the drive and because I have a load of USB storage vs limited flash space. USB needs to be ext file system from memory.
How do I access the root?
Sorry, I'm a complete novice
If you FTP into the ET8500 and then in the root create a folder called picon then put them in there, and job is a good'un they are installed into FLash.
Have you downloaded them from the plugins menu on the box?
Have you downloaded them from the plugins menu on the box?
Yes and I've installed one of them but no icons appear on EPG or LCD screen.
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
depending on the skin you may also need to enable them to display on infobar
graphical infobar epg settings.
change service title mode to picon and service name.
then graphical epg settings.
change service title mode to picon and service name.
Then channel selection settings.
show picons In service list. Change to yes.
depending on the skin you may also need to enable them to display on infobar
Changed the settings as above. Picons still not appearing.
Using skin Vix-night-HD.
How do I enable on info bar?
I don't think you need to on vix night hd. What picons have you tried? Also are you using abm or abe2?
Sent from my SM-G925F using Tapatalk
I don't think you need to on vix night hd. What picons have you tried? Also are you using abm or abe2?
Sent from my SM-G925F using Tapatalk
Not sure which picon I tried.
Using ABM
Which picons did you install. Go to plugins and press the red button and look what picons are there.
Which picons did you install. Go to plugins and press the red button and look what picons are there.
Tv-ziggo.casema
to ziggo.tvhome
abu baniaz
08-08-16, 17:15
Ziggo is a Dutch provider, so you are unlikely to have those channels.
Install ocram picons feeds.
Will be under "feeds"
Then install SNP picons. try blue on dark.
Will be in "picons"
Sent from my XT1032 using Forum Fiend v1.3.3.
Ziggo is a Dutch provider, so you are unlikely to have those channels.
Install ocram picons feeds.
Will be under "feeds"
Then install SNP picons. try blue on dark.
Will be in "picons"
Sent from my XT1032 using Forum Fiend v1.3.3.
All I can see under feeds is "pitons.xyz.
Installed plugins all start with "tv-east" or "tv-west".
install the feeds icons.xyz.
restart your box.
You will then see or ocrams picons in the plugins
install the feeds icons.xyz.
restart your box.
You will then see or ocrams picons in the plugins
Thanks. Will try later.
Finally got it to work (dark on blue) :smiley_yup:
Thanks to all for the their help and patience. :thumbsup:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.