Vu duo (genuine) work only old image - before 06.2010

[bibic]

Helllo to all.

Some time ago I buy fro ebay a vu duo original. Has an old image (dreamelite bh 1.1) and work OK. Few days ago I install last black hole image, but receiver not works; I upgrade cfe (3.0), then I install last image. Starting image and logo rotate always.

With old image (up to june 2010) all is ok, but I dont have sound on hdmi (image has just DVI). Euroscart is ok and I not have that error on dmesg. Last image thas work is DreamEliteBH_VUDUO_133D_USB.

I change 3 x AOZ1212 and capacitors. I use null modem cable for nfi image.

Why can't upgrade to the last image? Or how upgrade last image?

Thanks for your help.

[bibic]

This is the log with last image;
....
NET: Registered protocol family 10
[VID]: VIDEO_SET_STREAMTYPE 0
[VID]: VIDEO_SELECT_SOURCE 1
[VID]: VIDEO_PLAY 1 2 0
[VID]: VIDEO_CONTINUE 1 1
[VID]: VIDEO_CLEAR_BUFFER 1 1 0
[VID]: VIDEO_STOP 0 1
[VID]: VIDEO_SELECT_SOURCE 0
[CI]:ci_dev_open

[CI]:Opening A GPIO's for 7335 platform

[CI]:Opening A GPIO's for 7335 platform....done

[CI]:entering.. A NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card insertion status changed

[CI]:Opening B GPIO's for 7335 platform

[CI]:Opening B GPIO's for 7335 platform....done

[CI]:entering.. B NEXUS_DvbCi_Open

[CI]:NEXUS_DvbCi_Open done..

[CI]:Installing callbacks

[CI]:Forcing card check

[CI]:Card B insertion status changed

[CI]: CI interface initialised

[CI]:ci1_dev_open

[CI]:NEXUS_Remux_Start CI0 0 0

[CI]:>>close_mpod tuner:0

[CI]:remux stop

[CI]:get_remux_startcnt() count : 1

[CI]:get_remux_startcnt() count : 1

[CI]:>>close_mpod tuner:1

[CI]:remux stop

[CI]:get_remux_startcnt() count : 0

[CI]:get_remux_startcnt() count : 0

CPU 0 Unable to handle kernel paging request at virtual address 00000028, epc == e0723d0c, ra == e0724454
Oops[#1]:
Cpu 0
$ 0 : 00000000 30008700 e0723d0c 00000000
$ 4 : 00000000 30008701 00000249 0040022c
$ 8 : 00000018 8030dfb8 00000000 00000000
$12 : ffffff00 ffffffff 00000000 00000026
$16 : 00000002 00000002 e072442c e07243d4
$20 : e0724390 749651e8 7730acf0 74986dd0
$24 : 00000000 e074cbc8
$28 : 868d0000 868d1de8 767d6b48 e0724454
Hi : 00000000
Lo : 00000198
epc : e0723d0c NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
Tainted: P O
ra : e0724454 NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
Status: 30008703 KERNEL EXL IE
Cause : 00800008
BadVA : 00000028
PrId : 0002a044 (Brcm4380)
Modules linked in: ipv6 xfs libcrc32c brcmfb(O) dvb_bcm7335(PO) procmk(O)
Process enigma2 (pid: 398, threadinfo=868d0000, task=86a12078, tls=7798a490)
Stack : 86800300 e0705130 00000000 00000022 00000000 868d1e18 00000002 e07059f4
887eba70 e07050f0 e0b9dd5c e0705b88 00000002 00000001 00000000 00000000
00000000 00000000 e0b863f4 00000003 e0b863f4 005c5fac 00000003 005c5fac
749651e8 e0702aa4 7730acf0 74986dd0 767d6b48 800d9a90 86861d00 86800300
005c5fac 8012af10 00000041 80715d8c 8841cbd0 88295888 195c0109 0000000b
...
Call Trace:
[<e0723d0c>] NEXUS_Gpio_Close_impl+0x0/0x8c [dvb_bcm7335]
[<e0724454>] NEXUS_Gpio_Close+0x28/0x3c [dvb_bcm7335]
[<e07059f4>] max9597_enable_output+0x118/0x20c [dvb_bcm7335]
[<e0702aa4>] cleanup_procfs_stb_video+0x432c/0x55d0 [dvb_bcm7335]
[<8012af10>] proc_file_write+0x80/0xe8
[<80126084>] proc_reg_write+0x84/0xd8
[<800c8a8c>] vfs_write+0x9c/0x184
[<800c8dc4>] sys_write+0x58/0xbc
[<8000e448>] stack_done+0x20/0x44


Code: 27393328 03200008 00002821 <8c850028> 27bdffe8 afb00010 afbf0014 10a00007 00808021
---[ end trace 9f5ca139d987dc5d ]---

[Andy_Hazza]

How do you know its genuine, especially given you bought off the worst place for clone receivers? Sounds to me like a clone, especially given it won't take newer images. Apollo Build 21 (I think it was) was the last build clones could take.


Sent from my iPhone using Tapatalk

[bibic]

It's not a clone. 100% original.

[Andy_Hazza]

Doesn't sound like it, thats why you're having issues.


Sent from my iPhone using Tapatalk

[bibic]

I update bootloader (3.0)

BCM73350010
012
Shmoo Version=1.9

MEMC-00000000 RW=00000011 WW=00000043 G=00000001 R=00000008 W=00000019
MEMC-00000001 RW=00000011 WW=00000055 G=00000001 R=00000008 W=00000008 #$
3
COPY CODE
A567

BCM97335B0 CFE v2.17, CFE core v2.12, Endian Mode: Little
Build Date: Thu Sep 29 12:01:32 2011 (shcheong@ncsh)
Copyright (C) Broadcom Corporation.

writing vfd

DDR Freq: 395MHz
CPU speed: 405MHz
Memory Config: 32+16 non-UMA
Device Tech: 1Gb
Total memory: 384MB
Boot Device: NAND
ECC: Hamming
Total flash: 128MB

Initializing USB.
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub
USB: Locating Class 09 Vendor 0000 Product 0000: USB Hub

CFE initialized.

USB: New device connected to bus 1 hub 1 port 1
USB: Resetting device on bus 1 port 1
USB: Locating Class 08 Vendor 0457 Product 0151: Mass-Storage Device
USBMASS: Unit 0 connected
checking usb
Reading usbdisk0:/vuplus/duo/cfe_cfe_auto.bin: >> Done. 287604 bytes read

Programming...
done. 287604 bytes written0 0x20000 done
please remove usb first and reboot

[bibic]

Few 2 week ago I install last BH image (3.0.2) and I make update online. All was good, except hdmi port; no image on hdmi (just euroscart). I reinstall another image and spinner rotate always. Now I back on old image that work (black hole 1.3.2). On this image I not have sound on hdmi; I have dvi, scart and component.
And if you know something, please help me. If not, dont tell me that I not have genuine vu duo.

48962

48963

[Huevos]

If it works with an older image and not with the latest it is a clone.

[bibic]

Please, read up. IT"S NOT A CLONE! I installed last black hole image (3.0.2) and I made online update. With a clone you can make this?

[samsid]

looking at screen shots , dream elite BH isn't a genuine BH IMAGE, it's a patched version based on original build Andy Hazza has advised you of last Open Vix that would work on clones, for genuine BH it would be images released before December 2013 , which would be roughly BH 2.0 4as cut off point TBH it does look like you have a clone

[Huevos]

Load latest OpenViX. If it doesn't load the box is a clone.

[Andy_Hazza]

On latest blackhole image use a swap file.


Sent from my iPhone using Tapatalk

[bibic]

looking at screen shots , dream elite BH isn't a genuine BH IMAGE
Did you try first image from black hole? First time was dreamelite team, then it appeared 2 teams; black hole (not have image for dreambox) and dreamelite team - image for dreambox.


Load latest OpenViX. If it doesn't load the box is a clone.
I try last genuine black hole and I make update online and was OK, but HDMI port not working.

I think it's a hardware problems. If I leave 2-3 weeks without connected on 220V work to install last image, but HDMI port NOT WORK!!!!!

[bibic]

On latest blackhole image use a swap file.

Please explain.

[Andy_Hazza]

Because you mentioned constant logo rotate, enabling a swap file might help. I've not used BH in yonks, and have no desire to do so, so can't give BH instructions only ViX. Sorry.


Sent from my iPhone using Tapatalk

[bibic]

Ok. I'll install vix image. (in a few days).

[bibic]

The same problems; http://www.world-of-satellite.com/showthread.php?31717-VU-Duo-won-t-fully-boot

[Andy_Hazza]

If its genuine, you would have no problems installing the very latest image. But because you can't, its pointing in the direction of a clone unfortunately.
Try different usb sticks to flash the latest image, making sure you have formatted the usb to fat32. Also make sure no other usb devices are present and you could also detach the HDD and see if that helps.
On the rear of the receiver, does it say anything like v1.0, v2.0 etc?


Sent from my iPhone using Tapatalk

[bibic]

I know how install new image (with usb or with VuUtil). Hehe
And the receiver it's 100% original (no stiker or something else).
Maybe it's flash memory (K9F1G08U0C-PCB0 128MB), STV6417,FMS6363CS or maybe capacitor from motherboard.

[Andy_Hazza]

Fresh flash wipes the flash memory so won't be that. Dunno about capacitor as you can flash older images. You need to find ViX Apollo Build 021 and that will determine if its clone or genuine.


Sent from my iPhone using Tapatalk

[bibic]

Link, please?

[bibic]

And if is before 06.2010 work 100%.

[Andy_Hazza]

No Apollo Build 021 is later than that. Maybe late 2014 early 2015, so if works will be clone, any builds after 021 n don't work even more so a clone. lol
Try googling for it, I don't have it, sorry.


Sent from my iPhone using Tapatalk

[bibic]

CFE> printenv
Variable Name Value
-------------------- --------------------------------------------------
BOOT_CONSOLE uart0
LINUX_FFS_STARTAD 0
LINUX_FFS_SIZE 7600000
LINUX_PART_STARTAD 7600000
LINUX_PART_SIZE 400000
ETH0_HWADDR 00:1D:EC:01:5E:19
DRAM0_SIZE 256
DRAM1_SIZE 128
FLASH_ECC_SCHEME Hamming
FLASH_TYPE NAND
FLASH_SIZE 128
CFE_VERSION 2.12.17
CFE_BOARDNAME BCM97335B0
CFE_MEMORYSIZE 128
*** command status = 0

This means my cfe not update?????
CFE_VERSION 2.12.17

[Andy_Hazza]

Try flashing latest bootloader. Found here >> http://www.openvix.co.uk/index.php/downloads/bootloaders/venton-unibox-bootloaders/vu-duo-bootloaders/
Like I've said previously use a different usb stick and make sure its formatted to fat32.


Sent from my iPhone using Tapatalk

[bibic]

I update last bootloader many times.

[Andy_Hazza]

Got to be either usb problem or a receiver issue (clone), no other explanation imo.


Sent from my iPhone using Tapatalk

[bibic]

Hello again,
I have another problems; I replace few capacitors from motherboard (hoping the elimination of causes) and wiring was exfoliated. Where coming plus capacitor C665 (near euroscart - 220 mF/50V) and plus C264 (near network and usb jack - I replaced with 220 mF/25V).
Thanks

49795