PDA

View Full Version : Et 10000 V Home hub 5


gluper
07-07-16, 21:49
Hope you can help.

I have had BT for 6 weeks now. It has been awful, it keeps crashing. I have complained many times but now I think that it is not their fault.

My internet went down again earlier and I removed the 2 X ethernet cables from my Xtrend. Hey presto internet back.

Any ideas? Is my Xtrend faulty or is it a settings problem.
ccs
07-07-16, 21:59
...you're connecting both Ethernet ports on your et10k into the bt hub?
daz450
07-07-16, 22:20
You only put a cable into the LAN port the other is a VLAN port which you don't need to plug into.
cactikid
07-07-16, 23:51
this drove me mad with 2 options for lan and choosing the correct port and setup .network test will show working if needing to check.
abu baniaz
08-07-16, 05:26
I am guessing you are using MgCamd. Your mg_cfg has the logging option on and it is crippling your network.
twol
08-07-16, 06:56
Because of issues after flashing a new image, I always stuck 2 internet cables into my previous ET10000 - never caused an issue, in fact prevented issues, so guess Abu has pointed out likely issue:)
john doe
08-07-16, 09:03
i had the same issue sometime back and had bt engineer come out. it turned out to my solo2, after playing around is cane down to MGcamd file setup. I re-setup and bingo, it worked fine. I
gluper
08-07-16, 11:47
Yes I am, I thought that one was for Sat and the other for Iptv etc.
gluper
08-07-16, 11:48
this drove me mad with 2 options for lan and choosing the correct port and setup .network test will show working if needing to check.
Sorry clicked wrong quote button.

Thank you
gluper
08-07-16, 11:49
I am guessing you are using MgCamd. Your mg_cfg has the logging option on and it is crippling your network.

Yes I am. How can I solve the issue?

Thank you
abu baniaz
08-07-16, 12:01
Use these config files

http://www.world-of-satellite.com/showthread.php?40635-mgcamd-wont-autostart&p=312719&viewfull=1#post312719

or

http://www.world-of-satellite.com/showthread.php?39890-Help-with-Cable-Set-up&p=306359&viewfull=1#post306359


The most important thing is the L value. It should be 0, not 3.
gluper
08-07-16, 12:39
Use these config files

http://www.world-of-satellite.com/showthread.php?40635-mgcamd-wont-autostart&p=312719&viewfull=1#post312719

or

http://www.world-of-satellite.com/showthread.php?39890-Help-with-Cable-Set-up&p=306359&viewfull=1#post306359


The most important thing is the L value. It should be 0, not 3.

Abu, I want to have your babies!

I have just inserted the new config files and I have internet on laptop and Xtrend working.

Thank you so much. I now need to come to terms with all the abuse that I gave BT. I feel so guilty.
DaMacFunkin
08-07-16, 13:02
Don't feel guilty they defiantly deserve it somewhere down the line.
gluper
08-07-16, 15:07
Getting there. Now it doesnt crash the internet but. Ts media ans Kodi are not working. Any ideas?
john doe
08-07-16, 16:34
ts media is pants. not sure if kodi works on the ET range, get a fire stick and install kodi, works great
gluper
08-07-16, 18:11
ts media is pants. not sure if kodi works on the ET range, get a fire stick and install kodi, works great

It has worked before.
twol
08-07-16, 18:15
Full kodi doesn't work on the Xtrend receivers but Kodi direct does and is supported on the main Xtrend web site.
gluper
08-07-16, 20:24
Full kodi doesn't work on the Xtrend receivers but Kodi direct does and is supported on the main Xtrend web site.

Kodi direct was working last week.