View Full Version : Dsayers thread, use jasper mix file
Have attached a new Custom XML based on abu baniuz Custom mix XML due to Virginmedia Changing there channel numbers around Yesterday 30/07/2015
No channels have been left out its exactly the same as Abu's xml just with the new channel numbers so the HD channels show again
Extract and place in the custom folder. /usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/custom/
The file was composed based on using HD numbering. You must select a HD region for Sky UK.
You must make ABM scan cable. You do not have to create the cable bouquets though.
is this the latest version?
im also not getting setanta sd or hd in the one sports bouquet is there a way to add it to the xml file
abu baniaz
20-03-16, 18:30
im also not getting setanta sd or hd in the one sports bouquet is there a way to add it to the xml file
You have either:
Not enabled not-indexed channels in ABM's config menu (you must be in expert mode) or
Not slected region ending with "custom"
In the fist post it says choose your area hd so I should be choosing custom instead?
abu baniaz
20-03-16, 18:56
In the fist post it says choose your area hd so I should be choosing custom instead?
Apologies. That is why it does not work for you.
Apologies. That is why it does not work for you.
Is there a way around it? Because I like this setup rather than having 2 bouquets
abu baniaz
20-03-16, 19:30
You should be doing things as per post 2.
You should be doing things as per post 2.
that's what i have done but they still don't show in the main sports bouquet i've had to generate sections bouquet for roi then ran scan then hidden all the roi bouquets apart from sports then scan again so i have 2 sports bouquets. ill have a look at the custom xml file in post 2 to see if there's anything on there thanks
abu baniaz
20-03-16, 19:56
Best to postattach a debug log that contains a log of your ABM run
Best to post a debug log that contains a log of your ABM run
my debug log
:39 GMT
[AutoBouquetsMaker] AutoBouquetsMaker Time set to Mon 21 Mar 2016 05:00:00 GMT (now=Sun 20 Mar 2016 18:34:39 GMT)
[AutoBouquetsMaker] AutoBouquetsMaker Schedule Enabled at Sun 20 Mar 2016 18:58:22 GMT
[AutoBouquetsMaker] AutoBouquetsMaker Time set to Mon 21 Mar 2016 05:00:00 GMT (now=Sun 20 Mar 2016 18:58:22 GMT)
[Manager] Loading settings...
[BouquetsReader] Reading lamedb...
[BouquetsReader] Read 129 transponders and 1444 services
[Manager] Settings loaded
[AutoBouquetsMaker] searching for tuner for Sky UK
[AutoBouquetsMaker] Search NIM for orbital position 282
[AutoBouquetsMaker] Nim found on slot id 0 with sat 28.2E Astra 2E/2F/2G
[AutoBouquetsMaker] Fixed dish. Will wait up to 10 seconds for tuner lock.
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] ACQUIRING TSID/ONID
[Manager] Reading sat_282_sky_uk (hd_north_west_yorkshire)...
[Tools] Transponder provider name sat_282_sky_uk
[DvbScanner] Adapter 0
[DvbScanner] Demuxer 1
[DvbScanner] Frontend 0
[DvbScanner] DVBType dvbs
[DvbScanner] NIT pid: 0x10
[DvbScanner] NIT current table id: 0x40
[DvbScanner] NIT other table id: 0x41
[DvbScanner] Ignore visible service flag: 0
[DvbScanner] SDT pid: 0x11
[DvbScanner] SDT current table id: 0x42
[DvbScanner] SDT other table id: 0x46
[DvbScanner] BAT pid: 0x11
[DvbScanner] BAT table id: 0x4a
[DvbScanner] Reading transponders...
[DvbScanner] demuxer_device /dev/dvb/adapter0/demux1
[DvbScanner] nit_pid 16
[DvbScanner] nit_current_table_id 64
[DvbScanner] mask 254
[DvbScanner] frontend 0
[DvbScanner] Scan complete, netid: None
[DvbScanner] Added/Updated 81 transponders with network_id = 0x20
[DvbScanner] Reading services (sky)...
[DvbScanner] Read 652 services with bouquet_id = 0x1005
[DvbScanner] Reading services extra info...
[DvbScanner] Read extra info for 877 services
[Manager] read sat_282_sky_uk, Done
[AutoBouquetsMaker] searching for tuner for Virgin (UK)
[AutoBouquetsMaker] Search NIM
[AutoBouquetsMaker] Nim found on slot id 1 but it's busy. Stopping active service
[AutoBouquetsMaker] Fixed dish. Will wait up to 10 seconds for tuner lock.
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] ACQUIRING TSID/ONID
[Manager] Reading cable_uk_virgin (hd_41064_dvbc_uk)...
[Tools] Transponder provider name cable_uk_virgin
[DvbScanner] Adapter 0
[DvbScanner] Demuxer 0
[DvbScanner] Frontend 1
[DvbScanner] DVBType dvbc
[DvbScanner] NIT pid: 0x10
[DvbScanner] NIT current table id: 0x40
[DvbScanner] NIT other table id: 0x41
[DvbScanner] Ignore visible service flag: 0
[DvbScanner] SDT pid: 0x11
[DvbScanner] SDT current table id: 0x42
[DvbScanner] SDT other table id: 0x46
[DvbScanner] Reading transponders...
[DvbScanner] demuxer_device /dev/dvb/adapter0/demux0
[DvbScanner] nit_pid 16
[DvbScanner] nit_current_table_id 64
[DvbScanner] mask 254
[DvbScanner] frontend 1
[DvbScanner] Scan complete, netid: 41064
[DvbScanner] Added/Updated 48 transponders with network_id = 0xa068 and network_id = 0x-1
[DvbScanner] Reading services (lcn)...
[DvbScanner] Read 420 services
[DvbScanner] 413 valid services
[Manager] read cable_uk_virgin, Done
[Manager] Saving...
[Manager] Bouquets to hide: {'sat_282_sky_uk': [580, 650, 780, 861, 881, 1050, 950, 980, 998], 'sat_282_sky_irl': [101, 301, 350, 501, 520, 580, 601, 650, 700, 780, 861, 881, 889, 899, 900, 950, 1000, 1020, 1030, 1050]}
[Manager] TV bouquets to keep: ['userbouquet.favourites.tv', 'userbouquet.LastScanned.tv']
[Manager] Radio bouquets to keep: ['userbouquet.favourites.radio']
[Manager] Add provider prefix to bouqets: False
[BouquetsWriter] Writing lamedb...
[BouquetsWriter] Wrote 129 transponders and 1444 services
[Tools] No custom video LCN file for sat_282_sky_uk.
[Tools] No custom radio LCN file for sat_282_sky_uk.
[Tools] No custom video LCN file for cable_uk_virgin.
[Tools] No custom radio LCN file for cable_uk_virgin.
[BouquetsWriter] Writing sat_282_sky_uk bouquet...
[BouquetsWriter] Done
[Tools] No CustomMix file for cable_uk_virgin.for 877 services
[BouquetsWriter] Writing cable_uk_virgin bouquet...
[BouquetsWriter] Done
[Tools] No favorite.xml file
[BouquetsWriter] Writing bouquets index...
[BouquetsWriter] Done
[Manager] write bouquets, Done
[Manager] Loading settings...
[BouquetsReader] Reading lamedb...
[BouquetsReader] Read 129 transponders and 1444 services
[Manager] Settings loaded
[AutoBouquetsMaker] searching for tuner for Sky UK
[AutoBouquetsMaker] Search NIM for orbital position 282
[AutoBouquetsMaker] Nim found on slot id 0 with sat 28.2E Astra 2E/2F/2G
[AutoBouquetsMaker] Fixed dish. Will wait up to 10 seconds for tuner lock.
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] ACQUIRING TSID/ONID
[Manager] Reading sat_282_sky_uk (hd_north_west_yorkshire)...
[Tools] Transponder provider name sat_282_sky_uk
[DvbScanner] Adapter 0
[DvbScanner] Demuxer 1
[DvbScanner] Frontend 0
[DvbScanner] DVBType dvbs
[DvbScanner] NIT pid: 0x10
[DvbScanner] NIT current table id: 0x40
[DvbScanner] NIT other table id: 0x41
[DvbScanner] Ignore visible service flag: 0
[DvbScanner] SDT pid: 0x11
[DvbScanner] SDT current table id: 0x42
[DvbScanner] SDT other table id: 0x46
[DvbScanner] BAT pid: 0x11
[DvbScanner] BAT table id: 0x4a
[DvbScanner] Reading transponders...
[DvbScanner] demuxer_device /dev/dvb/adapter0/demux1
[DvbScanner] nit_pid 16
[DvbScanner] nit_current_table_id 64
[DvbScanner] mask 254
[DvbScanner] frontend 0
[DvbScanner] Scan complete, netid: None
[DvbScanner] Added/Updated 81 transponders with network_id = 0x20
[DvbScanner] Reading services (sky)...
[DvbScanner] Read 652 services with bouquet_id = 0x1005
[DvbScanner] Reading services extra info...
[DvbScanner] Read extra info for 877 services
[Manager] read sat_282_sky_uk, Done
[AutoBouquetsMaker] searching for tuner for Virgin (UK)
[AutoBouquetsMaker] Search NIM
[AutoBouquetsMaker] Nim found on slot id 1 but it's busy. Stopping active service
[AutoBouquetsMaker] Fixed dish. Will wait up to 10 seconds for tuner lock.
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] TUNING
[AutoBouquetsMaker] ACQUIRING TSID/ONID
[Manager] Reading cable_uk_virgin (hd_41064_dvbc_uk)...
[Tools] Transponder provider name cable_uk_virgin
[DvbScanner] Adapter 0
[DvbScanner] Demuxer 0
[DvbScanner] Frontend 1
[DvbScanner] DVBType dvbc
[DvbScanner] NIT pid: 0x10
[DvbScanner] NIT current table id: 0x40
[DvbScanner] NIT other table id: 0x41
[DvbScanner] Ignore visible service flag: 0
[DvbScanner] SDT pid: 0x11
[DvbScanner] SDT current table id: 0x42
[DvbScanner] SDT other table id: 0x46
[DvbScanner] Reading transponders...
[DvbScanner] demuxer_device /dev/dvb/adapter0/demux0
[DvbScanner] nit_pid 16
[DvbScanner] nit_current_table_id 64
[DvbScanner] mask 254
[DvbScanner] frontend 1
[DvbScanner] Scan complete, netid: 41064
[DvbScanner] Added/Updated 48 transponders with network_id = 0xa068 and network_id = 0x-1
[DvbScanner] Reading services (lcn)...
[DvbScanner] Read 420 services
[DvbScanner] 413 valid services
[Manager] read cable_uk_virgin, Done
[Manager] Saving...
[Manager] Bouquets to hide: {'sat_282_sky_uk': [580, 650, 780, 861, 881, 1050, 950, 980, 998], 'sat_282_sky_irl': [101, 301, 350, 501, 520, 580, 601, 650, 700, 780, 861, 881, 889, 899, 900, 950, 1000, 1020, 1030, 1050]}
[Manager] TV bouquets to keep: ['userbouquet.favourites.tv', 'userbouquet.LastScanned.tv']
[Manager] Radio bouquets to keep: ['userbouquet.favourites.radio']
[Manager] Add provider prefix to bouqets: False
[BouquetsWriter] Writing lamedb...
[BouquetsWriter] Wrote 129 transponders and 1444 services
[Tools] No custom video LCN file for sat_282_sky_uk.
[Tools] No custom radio LCN file for sat_282_sky_uk.
[Tools] No custom video LCN file for cable_uk_virgin.
[Tools] No custom radio LCN file for cable_uk_virgin.
[BouquetsWriter] Writing sat_282_sky_uk bouquet...
[BouquetsWriter] Done
[Tools] No CustomMix file for cable_uk_virgin.
[BouquetsWriter] Writing cable_uk_virgin bouquet...
[BouquetsWriter] Done
[Tools] No favorite.xml file
[BouquetsWriter] Writing bouquets index...
[BouquetsWriter] Done
[Manager] write bouquets, Done
abu baniaz
20-03-16, 20:12
You are missing parts of the log. Attach it instead of pasting it.
abu baniaz
20-03-16, 20:35
It seems you are reading the log, pasting contents in a new file and then uploading the file. Do this instaed. Transfer the log to PC, Attach log to thread.
Also, what image (name and version number)
Which reciever?
that was the log that i ftpd done it again just incase
i'm running vix 3.2037 on Edision OS MINI 147418
abu baniaz
20-03-16, 21:00
Sorry, can't help with that log. Its starts midway and does not show your config.
Name should be like this
Enigma2-2016-03-20_19-58-11.log
Don't rename the file you have. Re-transfer then upload the whole file.
abu baniaz
20-03-16, 21:09
Looks like you have not transferred the custom mix file to the custom folder either.
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/custom
Sorry, cant help with that log. Its starts midway and doe snot show yout config
Name should be like this
Enigma2-2016-03-20_19-58-11.log
ok thanks im not sure whats happened but after running a scan again its showing setanta ireland on 418 and setanta hd on 455 even though i have channel swap to yes
yes i have transferred the custom folder because i have the cable hd channels in the sat bouquets
to save the log in autobouquet marker, show log then yellow to save log to tmp is that correct?
abu baniaz
20-03-16, 21:20
Sometimes getting people to reveal settings they have is harder than getting blood from stone. When ABM runs, the settings are written to the debug log with prefix [ABM-config] Attaching an incomplete log is not very helpful/Perhaps a transfer error. I was able to garnish the following:
[Tools] No custom video LCN file for sat_282_sky_uk.
[Tools] No custom radio LCN file for sat_282_sky_uk.
[Tools] No custom video LCN file for cable_uk_virgin.
[Tools] No custom radio LCN file for cable_uk_virgin.
Sky Roi not selected. No custom file either. Anyway, glad you are sorted
to save the log in autobouquet marker, show log then yellow to save log to tmp is that correct?No.
Switch on debug logs in menu -> setep -> system -> logs.
Gui reboot.
Do ABM scan.
Post the debug log.
this is a screen shot of my etc folder abm.log
47419
im not sure why it wasnt showing the correct log or file
abu baniaz
20-03-16, 21:36
to save the log in autobouquet marker, show log then yellow to save log to tmp is that correct?
Looks like you have found an issue. ABM log is saved to /tmp and appears to be incomplete. We'll have to resolve it. We usually ask for the debug log. Which is in home/root/logs as the default location.
See this thread http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions
Sometimes a refresh of FTP programs is required before transferring. Otherwise you still have the cached file.
heres a new updated mix file since all the channel changes with BBC
47738
Just unzip and FTP the attached file to
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/custom/
and then Rescan
with that mix how would i set autobouquet marker im currently using the first 1 from the original post that ive edited to delete the duplicate sd channels and updated for the correct vm sports and roi channels i currently have roi hd no bouquets, sky uk HD with bouquets and vm with generate main bouquets for epg refresh heres my custom xml 47808
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.