p30n
16-05-16, 20:19
I do not know if this is the right place to ask such a question but here goes nothing: (move it to appropriate sub-forum)
I have a Vu+ Solo SE v2 with twin tuners ie. 2x LNB inputs on the back and a motorised USALS dish.
The retailer I bought it from told me that there is also an internal loopthrough function on this so that I can internally "clone" one cable's input to be able to record + watch different channels in the same quadrant (transponder and polarity afaik?)
I have tried setting up my tuners in the box in many different ways but whenever I choose loopthrough either on A or B tuner well then I will get no channels showing at all, neither will my USALS motor move automatically or manually (drive right-left)
Everything works as it should when I set up only tuner A or B as simple single USALS tuner and the other tuner to not configured. Then I have manual motor function and automatic USALS working as it is supposed to.
I am well aware that I am limited in recording/watching different channels with only 1 cable from the dish but at least to have the channels in same quadrant showing would be an improvement over the "useless" twin tuner functionality that I have at the moment.
I will at some point with the landlords permission try to pull another cable from the dish and get a working dual output LNB but that is another story for the future, for now I would like to have the twintuner "internal cloning / loopthrough" working as advertised.
Anyone familiar with this and could point me in the right direction considering the tuner setup?
thanks all in advance!
I have a Vu+ Solo SE v2 with twin tuners ie. 2x LNB inputs on the back and a motorised USALS dish.
The retailer I bought it from told me that there is also an internal loopthrough function on this so that I can internally "clone" one cable's input to be able to record + watch different channels in the same quadrant (transponder and polarity afaik?)
I have tried setting up my tuners in the box in many different ways but whenever I choose loopthrough either on A or B tuner well then I will get no channels showing at all, neither will my USALS motor move automatically or manually (drive right-left)
Everything works as it should when I set up only tuner A or B as simple single USALS tuner and the other tuner to not configured. Then I have manual motor function and automatic USALS working as it is supposed to.
I am well aware that I am limited in recording/watching different channels with only 1 cable from the dish but at least to have the channels in same quadrant showing would be an improvement over the "useless" twin tuner functionality that I have at the moment.
I will at some point with the landlords permission try to pull another cable from the dish and get a working dual output LNB but that is another story for the future, for now I would like to have the twintuner "internal cloning / loopthrough" working as advertised.
Anyone familiar with this and could point me in the right direction considering the tuner setup?
thanks all in advance!