VU+ duo2 DBV-T2 not working.

[kurre]

Hi.

I have a DVB-S2 and a DBV-T that I replaced with a dual hybrid C/T/T2 NIM(TT3L10).
Receiver A: Vuplus DVB-S NIM(AVL6211) (DVB-S2)
Receiver B: Vuplus DVB-T NIM(TT3L10) (DVB-T2) set to Scandinavia (Europe DVB-T/T2)
Receiver C: Vuplus DVB-T NIM(TT3L10) (DVB-T2) set to Scandinavia (Europe DVB-T/T2)
And I live in Scandinavia.

In the automatic scan menu only 2 entrys showes up, DVB-S2 and and only one DVB-T2.

If I scan DVB-T2 no DVB-T2 programs is found, only DVB-T.
Then, if I do a manual scan of a channel or frequency that I know is DVB-T2 he cant find any.

Anyone that have a solution to this.
If it is a VIX problem or a VU+ problem.

OE system: OE-Alliance 3.4
Distribution av programvaran: openvix
Firmware version: 4.1.004
Version av drivrutinerna: 20151201
Kernel version: 3.13.5
Gui version: 2016-04-23

/Kurre :confused:

[tappari]

In which Scandinavian country? You maybe better check from /etc/tuxbox/terrestrial.xml/Scandinavia (Europe DVB-T/T2) if those frequencies and bandwidths are suitable for your area.

[kurre]

Hi.

The vu+ finds all the DVB-T channels, not T2 and I know that T2 exists.

/Kurre

[abu baniaz]

what provider are you scanning?

Can you try manually scanning the frequencies you know to have T2.

[tappari]

Hi.

The vu+ finds all the DVB-T channels, not T2 and I know that T2 exists.

/Kurre
But do you know where the T2 broadcasts are? In UHF or VHF area? I know for experience that some people try to use Scandinavian tuner setting in Finland. That doesn`t work since DNA in Finland is broadcasting T2 channels in VHF-area using 7 MHz bandwidth. In Scandinavia tuner-setting bandwidth is 8 MHz.
So instead in Finland the tuner-setting should be: Europe,Middle East, Africa DVB-T-Frequencies.
Should be very easy to check if you know what frequencies and bandwidths your operator is using.
You didn`t tell your country, but anyway by checking your operators frequencies and bandwidths just compare those in /etc/tuxbox/terrestrial.xml.

[kurre]

Hi.
I live in Sweden.

This is the frequency that the VU+ can´t find.
From the operator in Nassjo.
Kanal 25 Frekvens 506 MHz
SVT2 HD Jönköping, TV4 HD Nässjö, Animal Planet HD, SVT1 HD Jönköping, Kanal 5 HD och TV3 HD JÖNKÖPING

And here is some entrys from tuxbox.
<transponder centre_frequency="490000000" bandwidth="0" constellation="3"/> This one the VU+ finds.
<transponder centre_frequency="506000000" bandwidth="0" constellation="3"/> But not this one.

/Kurre

[kurre]

Tested with BH, no luck.
Tested with
System OE: OE 2.0
Distro: official
Firmware version: Experimental 2016-04-29.
Driver date: 3.13.5-20151201.r0
Kernel version: 3.13.5
Gui version: 2016-04-26-vuplus_experimental
No luck.

So it seams that VU+ have some work to do. :(
Have another terrestial box that can take HD but not T2 and it gives exatly the same result as with the VU+.
The channels around 506000Mhz (that works) has a SNR of 99% and the AGC has also 99% in the VU+ but the 506000Mhz is 0 (zero) on both.
Driver problem with NIM(TT3L10)?