View Full Version : [ViX_Misc] [Bug is not Edision Specific] Scans bringing box out of standby.
A little niggle I've got with my new edision's, I've got autobouquets e2 and cross epg set up to scan at 5am and 5.30am, problem is one of them or both are bringing the boxes out of standby as they are both on in the morning, had this set up exactly the same way on my previous boxes and never had this problem, is this just something the edision's do? I'm pretty sure they should both scan whilst in standby.
TIA
Andy_Hazza
01-05-16, 08:17
Don't have Edison's personally. Do you have epg data saving to a usb flash drive or usb hdd? Could always setup a power timer so the receivers go back into standby mode afterwards?
When a receiver is turned on it usually would mean its failed at something I.e. The CrossEPG schedule etc. But the Edison should have plenty of memory n ram to cope with them.
Sent from my iPhone using Tapatalk
Thanks for your reply, I have epg data set to save to hdd, I've just noticed that cross epg failed to download this morning, I just done a manual scan and it downloaded fine, the failed download with cross epg is obviously why the box was on this morning, would you be able to shed some light on what would cause cross epg to fail with its download at my set time this morning?
TIA
Debug logs might help spot the issue.
Just a had look in the logs for cross epg and it seems it Completed its download fine at 5.30 but a crash log was created at 5.30 but with no information the crash log is completely blank?
Andy_Hazza
01-05-16, 08:49
Do you have logs enabled? Menu > Setup > System > Logs > Settings.
Sent from my iPhone using Tapatalk
Yes logs are enabled. Also the second edision in the bedroom seems to be fine, just my duel tuner that had the problem this morning.
Andy_Hazza
01-05-16, 10:11
What do you have setup to pull your EPG in?
Sent from my iPhone using Tapatalk
Open Tv sky 28.2, second box is set up exactly the same and hasn't had the problem. Always has cross epg set up this way with my previous boxes and this is the first time I've had this happen.
Ok so I've still got this problem again the box was not in standby this morning, another crash log created at 5.29am there is info in the crash log and from what I gather it's a tuner problem although manually downloading cross peg works fine, another big problem is twice now I've had a recording set up in the early hours and both times the recording is saying completed but the hdd has been wiped! Everything including my other recordings has gone, I've look at tuner b and when doing a signal check the signal is fine then just drops with 0 snr and agc and not locked, checked cables and there fine, really haven't got off to a good start with this edision any help would be appreciated.
TIA
I will upload the crash log after work if it helps.
Ok so I've still got this problem again the box was not in standby this morning, another crash log created at 5.29am there is info in the crash log and from what I gather it's a tuner problem although manually downloading cross peg works fine, another big problem is twice now I've had a recording set up in the early hours and both times the recording is saying completed but the hdd has been wiped! Everything including my other recordings has gone, I've look at tuner b and when doing a signal check the signal is fine then just drops with 0 snr and agc and not locked, checked cables and there fine, really haven't got off to a good start with this edision any help would be appreciated.
TIA
I will upload the crash log after work if it helps.
Crashlog would be useful.
Check tuner B.
Menu > Setup > Service Searching > Manual Scan > Select Tuner B at top, set 'Type of Scan' to 'Single Satellite'. Press OK and run the scan. Should find somewhere in between 900-950 services. If less swap feeds from Tuner A and run scan again.
Are you sure Crossepg and ABM scan times are not clashing?
ok here's the crash log i'm running a scan on tuner b now and will report back. ABM E2 is set to scan at 5.00 am and cross epg to download at 5.30am.
OpenViX Enigma2 Crashlog
Crashdate = Tue May 3 05:29:59 2016
Creator = OpenViX
Version = 4.1
Build = 004
Type = release
Machine = osmini
URL = http://www.world-of-satellite.com
Compiled = Apr 24 2016
Skin = slyk-1-hd/skin.xml
Component = Enigma2
Kernel CMDline = console=ttyS0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs
Nim Sockets = NIM Socket 0:
Type: DVB-S2
Name: Broadcom BCM73XX
Frontend_Device: 0
I2C_Device: 255
Has_Outputs: no
Internally_Connectable: 0
NIM Socket 1:
Type: DVB-S2
Name: FTS-260 (Montage RS6000)
Frontend_Device: 1
I2C_Device: 2
Has_Outputs: yes
Internally_Connectable: 0
n Bouquet userbouquet.ukcvs0a.tv
< 42461.921> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs08.tv
< 42461.921> [eDVBDB] 18 entries in Bouquet userbouquet.ukcvs08.tv
< 42461.921> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0c.tv
< 42461.924> [eDVBDB] 74 entries in Bouquet userbouquet.ukcvs0c.tv
< 42461.924> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0d.tv
< 42461.924> [eDVBDB] 3 entries in Bouquet userbouquet.ukcvs0d.tv
< 42461.925> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0e.tv
< 42461.925> [eDVBDB] 5 entries in Bouquet userbouquet.ukcvs0e.tv
< 42461.925> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
< 42461.926> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
< 42461.927> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.IPTV__tv_.tv
< 42462.121> [eDVBDB] 3235 entries in Bouquet userbouquet.IPTV__tv_.tv
< 42462.121> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs11.tv
< 42462.122> [eDVBDB] 10 entries in Bouquet userbouquet.ukcvs11.tv
< 42462.122> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs12.tv
< 42462.122> [eDVBDB] 9 entries in Bouquet userbouquet.ukcvs12.tv
< 42462.124> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.bbc_red_button__tv_.tv
< 42462.125> [eDVBDB] 6 entries in Bouquet userbouquet.bbc_red_button__tv_.tv
< 42462.126> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
< 42462.155> [eDVBDB] 934 entries in Bouquet userbouquet.LastScanned.tv
< 42462.155> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs10.tv to /etc/enigma2/userbouquet.ukcvs10.tv.del
< 42462.155> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs13.tv to /etc/enigma2/userbouquet.ukcvs13.tv.del
< 42462.156> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs14.tv to /etc/enigma2/userbouquet.ukcvs14.tv.del
< 42462.156> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs16.tv to /etc/enigma2/userbouquet.ukcvs16.tv.del
< 42462.158> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs0b.tv to /etc/enigma2/userbouquet.ukcvs0b.tv.del
< 42462.159> [eDVBDB] Rename unlinked bouquet file /etc/enigma2/userbouquet.ukcvs0f.tv to /etc/enigma2/userbouquet.ukcvs0f.tv.del
< 42462.162> [eDVBDB] 20 entries in Bouquet bouquets.tv
< 42462.165> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
< 42462.165> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs00.radio
< 42462.166> [eDVBDB] 58 entries in Bouquet userbouquet.ukcvs00.radio
< 42462.167> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
< 42462.168> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
< 42462.168> [eDVBDB] 2 entries in Bouquet bouquets.radio
< 42462.168> [eDVBDB] Renumbering...
< 42465.326> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 65(16)
< 42465.343> [AutoBouquets] fallback to default translation for Reloading Bouquets and Services...
< 42465.366> [Skin] processing screen MessageBox:
< 42465.398> [Skin] processing screen MessageBox_summary:
< 42465.409> [AutoBouquets] fallback to default translation for AutoBouquets E2
< 42465.446> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.tv
< 42465.446> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs00.tv
< 42465.477> [eDVBDB] 1039 entries in Bouquet userbouquet.ukcvs00.tv
< 42465.477> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs15.tv
< 42465.480> [eDVBDB] 115 entries in Bouquet userbouquet.ukcvs15.tv
< 42465.481> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs01.tv
< 42465.485> [eDVBDB] 157 entries in Bouquet userbouquet.ukcvs01.tv
< 42465.486> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs07.tv
< 42465.487> [eDVBDB] 39 entries in Bouquet userbouquet.ukcvs07.tv
< 42465.487> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs03.tv
< 42465.488> [eDVBDB] 42 entries in Bouquet userbouquet.ukcvs03.tv
< 42465.489> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs05.tv
< 42465.490> [eDVBDB] 49 entries in Bouquet userbouquet.ukcvs05.tv
< 42465.490> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs06.tv
< 42465.491> [eDVBDB] 20 entries in Bouquet userbouquet.ukcvs06.tv
< 42465.491> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs09.tv
< 42465.493> [eDVBDB] 37 entries in Bouquet userbouquet.ukcvs09.tv
< 42465.493> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs04.tv
< 42465.494> [eDVBDB] 34 entries in Bouquet userbouquet.ukcvs04.tv
< 42465.494> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0a.tv
< 42465.495> [eDVBDB] 30 entries in Bouquet userbouquet.ukcvs0a.tv
< 42465.495> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs08.tv
< 42465.496> [eDVBDB] 18 entries in Bouquet userbouquet.ukcvs08.tv
< 42465.496> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0c.tv
< 42465.498> [eDVBDB] 74 entries in Bouquet userbouquet.ukcvs0c.tv
< 42465.499> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0d.tv
< 42465.499> [eDVBDB] 3 entries in Bouquet userbouquet.ukcvs0d.tv
< 42465.499> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs0e.tv
< 42465.499> [eDVBDB] 5 entries in Bouquet userbouquet.ukcvs0e.tv
< 42465.499> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.tv
< 42465.499> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.tv
< 42465.500> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.IPTV__tv_.tv
< 42465.662> [eDVBDB] 3235 entries in Bouquet userbouquet.IPTV__tv_.tv
< 42465.662> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs11.tv
< 42465.662> [eDVBDB] 10 entries in Bouquet userbouquet.ukcvs11.tv
< 42465.662> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs12.tv
< 42465.663> [eDVBDB] 9 entries in Bouquet userbouquet.ukcvs12.tv
< 42465.663> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.bbc_red_button__tv_.tv
< 42465.663> [eDVBDB] 6 entries in Bouquet userbouquet.bbc_red_button__tv_.tv
< 42465.664> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.LastScanned.tv
< 42465.688> [eDVBDB] 934 entries in Bouquet userbouquet.LastScanned.tv
< 42465.688> [eDVBDB] 20 entries in Bouquet bouquets.tv
< 42465.689> [eDVBDB] loading bouquet... /etc/enigma2//bouquets.radio
< 42465.689> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.ukcvs00.radio
< 42465.691> [eDVBDB] 58 entries in Bouquet userbouquet.ukcvs00.radio
< 42465.691> [eDVBDB] loading bouquet... /etc/enigma2//userbouquet.favourites.radio
< 42465.691> [eDVBDB] 0 entries in Bouquet userbouquet.favourites.radio
< 42465.691> [eDVBDB] 2 entries in Bouquet bouquets.radio
< 42465.691> [eDVBDB] Renumbering...
< 42465.694> [eDVBDB] ---- opening lame channel db
< 42465.694> [eDVBDB] reading services (version 4)
< 42465.721> [eDVBDB] loaded 82 channels/transponders and 704 services
< 42469.409> [MessageBox] Timeout!
< 42469.431> [VideoHardware] reading preferred modes failed, using all modes
< 42469.431> [Standby] enter standby
< 42469.433> [eDVBCAService] free slot 0 demux 0 for service 1:0:1:1076:7E5:2:11A0000:0:0:0::402 Sky Sports 1
< 42469.433> [eDVBCAService] free service 1:0:1:1076:7E5:2:11A0000:0:0:0::402 Sky Sports 1
< 42469.440> [eDVBServicePlay] timeshift
< 42469.441> [eDVBServicePlay] timeshift /media/hdd/timeshift// statfs failed: No such file or directory
< 42469.444> [eDVBServicePlay] timeshift
< 42469.444> [eDVBServicePlay] timeshift /media/hdd/timeshift// statfs failed: No such file or directory
< 42469.445> [eTSMPEGDecoder] decoder state: play, vpid=ffffffff, apid=ffffffff
< 42469.445> [eDVBPCR0] DEMUX_STOP ok
< 42469.445> [eDVBPCR0] destroy
< 42469.446> [eDVBVideo0] DEMUX_STOP ok
< 42469.446> [eDVBVideo0] VIDEO_STOP ok
< 42469.462> [eDVBVideo0] destroy
< 42469.462> [eDVBAudio0] AUDIO_STOP ok
< 42469.504> [eDVBAudio0] DEMUX_STOP ok
< 42469.504> [eDVBAudio0] AUDIO_CONTINUE ok
< 42469.504> [eDVBAudio0] destroy
< 42469.504> [eDVBText0] DEMUX_STOP ok
< 42469.505> [eDVBText0] destroy
< 42469.510> [eDVBResourceManager] start release channel timer
< 42469.625> [Skin] processing screen Standby:
< 42469.630> [Skin] processing screen StandbySummary:
< 42469.641> [eDboxLCD] setLCDBrightness 25
< 42471.436> [DVBCAHandler] no more services
< 42472.512> [eDVBResourceManager] release cached channel (timer timeout)
< 42472.512> [eDVBLocalTimerHandler] remove channel 0x126a2f8
< 42472.512> [eEPGCache] remove channel 0x126a2f8
< 42472.514> [eDVBResourceManager] stop release channel timer
< 42475.516> [eDVBFrontend] try to close frontend 0
< 42545.864> [SoftcamManager] mgcamd.1.35a already running
< 42545.870> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 42662.272> [CacheFlush] sync
< 42662.310> [CacheFlush] free pagecache, dentries and inodes
< 42662.324> [CacheFlush] fallback to default translation for Mem cleared
< 42905.896> [SoftcamManager] mgcamd.1.35a already running
< 42905.902> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 42962.317> [CacheFlush] sync
< 42962.353> [CacheFlush] free pagecache, dentries and inodes
< 42962.365> [CacheFlush] fallback to default translation for Mem cleared
< 43253.350> [OnlineVersionCheck] Checking feeds state
< 43253.471> [OnlineVersionCheck] PASSED: stable
< 43253.471> [OnlineVersionCheck] Stable
< 43253.471> [OnlineVersionCheck] Starting background check.
< 43253.477> [IPKG] executing opkg --add-dest /:/ update
< 43253.477> [eConsoleAppContainer] Starting /bin/sh
< 43253.492> [Task] job Components.Task.Job name=OnlineVersionCheck #tasks=1 completed with [] in None
< 43253.561> [LogManager] Trim Poll Started
< 43253.575> [Task] job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
< 43253.944> [LogManager] Trash Poll Started
< 43253.947> [LogManager] probing folders
< 43253.977> [LogManager] found following log's: ['/home/root/logs']
< 43253.978> [LogManager] looking in: /home/root/logs
< 43253.990> [Task] job Components.Task.Job name=LogManager #tasks=1 completed with [] in None
< 43257.551> [IPKG] executing opkg --add-dest /:/ list-upgradable
< 43257.551> [eConsoleAppContainer] Starting /bin/sh
< 43257.553> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 34(16)
< 43260.143> [eMainloop::processOneEvent] unhandled POLLERR/HUP/NVAL for fd 34(16)
< 43262.424> [CacheFlush] sync
< 43262.474> [CacheFlush] free pagecache, dentries and inodes
< 43262.487> [CacheFlush] fallback to default translation for Mem cleared
< 43262.516> [NetworkTime] setting E2 time: 1462248861.64
< 43265.935> [SoftcamManager] mgcamd.1.35a already running
< 43265.942> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 43372.516> [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :)
< 43372.516> [eDVBLocalTimerHandler] RTC time is 05:16:11
< 43372.516> [eDVBLocalTimerHandler] Receiver time is 05:16:11
< 43372.516> [eDVBLocalTimerHandler] RTC to Receiver time difference is 0 seconds
< 43372.516> [eDVBLocalTimerHandler] no change needed
< 43434.996> [AutoTimer] Auto Poll
< 43434.997> [AutoTimer] Auto Poll Started
< 43435.002> [AutoTimer] No changes in configuration, won't parse
< 43435.006> [eEPGCache] event a85e not found in epgcache
< 43435.006> [eEPGCache] event 01c7 not found in epgcache
< 43435.006> [eEPGCache] event 01c7 not found in epgcache
< 43435.007> [eEPGCache] event 01c7 not found in epgcache
< 43435.007> [eEPGCache] event 01c7 not found in epgcache
< 43435.007> [eEPGCache] event 01c7 not found in epgcache
< 43435.007> [eEPGCache] event 01c7 not found in epgcache
< 43435.007> [eEPGCache] event 01c7 not found in epgcache
< 43435.026> [eEPGCache] lookup events with 'EastEnders' in title (ignore case)
< 43435.252> [AutoTimer] Skipping timer because it has not changed.
< 43435.273> [AutoTimer] Skipping timer because it has not changed.
< 43435.294> [AutoTimer] Skipping timer because it has not changed.
< 43435.321> [AutoTimer] Skipping timer because it has not changed.
< 43435.349> [AutoTimer] Skipping timer because it has not changed.
< 43435.860> [eEPGCache] lookup events with 'In the Club' in title (ignore case)
< 43436.026> [AutoTimer] Skipping timer because it has not changed.
< 43436.538> [eEPGCache] lookup events with 'Match of the Day' in title (ignore case)
< 43436.721> [AutoTimer] Skipping timer because it has not changed.
< 43437.262> [eEPGCache] lookup events with 'New: Home Fires' in title (ignore case)
< 43437.420> [AutoTimer] Skipping timer because it has not changed.
< 43437.929> [eEPGCache] lookup events with 'WWE Late Night Raw' in title (ignore case)
< 43438.598> [Task] job Components.Task.Job name=AutoTimer #tasks=6 completed with [] in None
< 43562.297> [CacheFlush] sync
< 43562.333> [CacheFlush] free pagecache, dentries and inodes
< 43562.346> [CacheFlush] fallback to default translation for Mem cleared
< 43625.962> [SoftcamManager] mgcamd.1.35a already running
< 43625.969> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 43862.320> [CacheFlush] sync
< 43862.354> [CacheFlush] free pagecache, dentries and inodes
< 43862.369> [CacheFlush] fallback to default translation for Mem cleared
< 43985.993> [SoftcamManager] mgcamd.1.35a already running
< 43985.999> [Task] job Components.Task.Job name=SoftcamCheck #tasks=1 completed with [] in None
< 44162.321> [CacheFlush] sync
< 44162.356> [CacheFlush] free pagecache, dentries and inodes
< 44162.369> [CacheFlush] fallback to default translation for Mem cleared
< 44199.962> [CrossEPG_Auto] onTimer occured at Tue 03 May 2016 05:29:59 IST
< 44199.971> [CrossEPG_Auto] Running CrossEPG Tue 03 May 2016 05:29:59 IST
< 44199.979> [CrossEPG_Auto] Time set to Wed 04 May 2016 05:30:00 IST (now=Tue 03 May 2016 05:29:59 IST)
< 44200.079> global name 'getImageDistro' is not defined
< 44200.079> [CrossEPG_Auto] providers selected for download:
< 44200.079> [CrossEPG_Auto] skyuk_astra2_28.2
< 44200.236> [CrossEPG_Wrapper] executing /usr/crossepg/crossepg_downloader -r -d /hdd/crossepg
< 44200.237> [eConsoleAppContainer] Starting /bin/sh
< 44200.505> [CrossEPG_Wrapper] <- READY
< 44200.510> [CrossEPG_Wrapper] -> OPEN
< 44200.516> [CrossEPG_Downloader] Search NIM for orbital position 282
< 44200.520> [eDVBFrontend] opening frontend 1
< 44200.552> [CrossEPG_Downloader] Nim found on slot id 1 with sat 28.2E Astra 2E/2F/2G
< 44200.553> [CrossEPG_Downloader] Fixed dish. Will wait up to 10 seconds for tuner lock.
< 44200.553> [eDVBChannel] getDemux cap=00
< 44200.553> [eDVBResourceManager] allocate demux cap=00
< 44200.553> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=1
< 44200.553> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 44200.554> [eDVBFrontend] (1)tune
< 44200.554> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 44200.554> [eDVBFrontend] prepare_sat System 0 Freq 11778000 Pol 1 SR 27500000 INV 2 FEC 2 orbpos 282 system 0 modulation 1 pilot 2, rolloff 0
< 44200.554> [eDVBFrontend] tuning to 1178 mhz
< 44200.554> [eDVBChannel] OURSTATE: tuner 1 tuning
< 44200.555> [CrossEPG_Wrapper] -> DEMUXER /dev/dvb/adapter0/demux0
< 44200.555> [CrossEPG_Wrapper] -> FRONTEND 1
< 44200.556> [eDVBFrontend] set sequence pos 3
< 44200.556> [eDVBFrontend] set sequence pos 4
< 44200.557> [eDVBFrontend] tuner 1 setVoltage 1
< 44200.557> [eDVBFrontend] tuner 1 sleep 200ms
< 44200.570> [Skin] processing screen MessageBox:
< 44200.633> [Skin] processing screen MessageBox_summary:
< 44200.643> [CrossEPG_Wrapper] -> QUIT
< 44200.653> [Skin] processing screen MessageBox:
< 44200.679> [Skin] processing screen MessageBox_summary:
< 44200.688> [CrossEPG_Wrapper] -> QUIT
< 44200.693> Traceback (most recent call last):
< 44200.693> File "/home/vix/oe-alliance/builds/openvix/release/xc7362/tmp/work/xc7362-oe-linux/enigma2-plugin-systemplugins-crossepg/enigma2-plugin-systemplugins-crossepg-0.8.1+gitrAUTOINC+c1d95d218d-r5/git/src/enigma2/python/crossepg_downloader.py", line 296, in checkTunerLock
< 44200.711> AttributeError: 'NoneType' object has no attribute 'getFrontendStatus'
< 44200.711> [ePyObject] (CallObject(<bound method CrossEPG_Downloader.checkTunerLock of <class 'Plugins.SystemPlugins.CrossEPG.crossepg_downloade r.CrossEPG_Downloader'>>,()) failed)
scan completed on tuner b 935 channels found.
Nothing wrong with tuner b then, got to be something in your setup. I would usb reflash, do not restore any backup settings. Setup complete fresh. Do not install ANY extras, no softcams, nothing. Use as free to air. Setup say Abm scan before crossepg say 3am and crossepg say 5am. Keep bouquets to standard abm.
Sent from my iPhone using Tapatalk
ok thanks for your help i will try that and see how it goes, just a couple of things, why when i check the signal on tuner b does it drop to 0 on snr and agc and not locked? also why would my hdd disappear from the system? I've just discovered that reboot brings the hdd back? also i have a single tuner edision set up in the bedroom and its working fine with exactly the same settings and setup.
Ok so I've ran some test's, I've currently got something recording on tuner b and have run a download on tuner a with cross epg, cross epg gets stuck at reading titles. If I record on tuner a and run cross epg on tuner b then it downloads fine,
Run a manual single satellite scan on tuner a please.
Sent from my iPhone using Tapatalk
Ok scan on tuner a finds 935 channels the same as tuner b.
Do the reflash I suggested
Sent from my iPhone using Tapatalk
Ok i think I figured out what's going on I've seemed to have had these issues when I've had something set to record late a night, the recording would take place on tuner a so the box would be on tuner b when the recordings ended, so the cross epg download at 5.30 am would take place on tuner a which is where I've found the problem with cross epg if that makes sense?
I'll do some tests tomorrow.
Sent from my iPhone using Tapatalk
abu baniaz
03-05-16, 19:10
Actually, it does not make sense. If both tuners are successfully scanning, there should be no issues at all.
Describe your cabling/dish/lnb setup.
How many cables have you got to the receiver?
Are they all direct from the LNB to receiver, i.e no (switches, splitters, not fed from another receiver)?
When you reflash as suggested by Sicilian, in your tuner configuration, select automatic. Please confirm whether 28.2 is found for both tuners.
Ok I'm on a communal system with two feeds to the box and another feed to the second edision in the bedroom, I've had the edision on the dual feed running for 4 days and it's happend twice coincidentally when I've had something recording in the early hours, I've checked the cables going into the box and swapped them over and they appear fine, my previous box on the exact same set up with the exact same settings worked absolutely fine.
I probably won't get round to a reflash until the weekend but I'll try to post the results before if I can.
abu baniaz
03-05-16, 19:38
Most communal systems only provide two outputs for the satellite. Can you confirm that my assumption is incorrect, i.e, please confirm every tuner on all your receivers has a separate signal wire direct to the communal ports/outlets.
You can check the tuners without reflashing.
Yes I have a separate feed to each tuner, dual feed in the lounge and single feed in the bedroom, my previous boxes where fine with this set up, I also used to have sky+ with a single feed multi room box.
abu baniaz
03-05-16, 19:57
Just a note:
You are using AB 28.2, not ABM. AB 28.2 operates on any active 28.2 service, it will not interfere with any recordings. There is no need to schedule it in the early hours of the morning. For example, the CH5 HD changes were about 10:00 today.
Your issue is with CrossEPG downloader. Hopefully Sicilian's tests may reveal any issues.
Thanks Abu I'm aware that abm e2 wouldn't interfere with recordings abm e2 was set to scan after the recordings finished anyway, I'm sure that I'm right in my findings that the recording takes place on tuner b and once finished stays on tuner b so the cross epg scan takes place on tuner a where I've now discovered cross epg won't download on tuner a hence why my box has been crashing at the same time I've got cross epg set to download on the days I've recorded in the early hours.
It's definitely a strange one, both tuners have a snr and agc of around 90% and never fail to scan 935 channels so I don't understand why cross epg plays up on 1 tuner and not both.
abu baniaz
03-05-16, 20:21
Thanks Abu I'm aware that abm e2 wouldn't interfere with recordings abm e2 was set to scan after the recordings finished anyway, I'm sure that I'm right in my findings that the recording takes place on tuner b and once finished stays on tuner b so the cross epg scan takes place on tuner a where I've now discovered cross epg won't download on tuner a hence why my box has been crashing at the same time I've got cross epg set to download on the days I've recorded in the early hours.
It's definitely a strange one, both tuners have a snr and agc of around 90% and never fail to scan 935 channels so I don't understand why cross epg plays up on 1 tuner and not both.
I said AB 28.2. Not ABM.
ABM will not interfere with recordings either. It just needs sole access to a tuner.
CrossEPG and ABM (not applicable to you) will use the last available qualifying free tuner. In your case, if all tuners are free, they will use tuner B. If Tuner B is occupied, they will use Tuner A. There may be an issue with the Edision getting the tuner status. Sicilian's will test for you.
the hdd has been wiped! Everything including my other recordings has goneIs this box exposed to the public internet?
No its not, the hdd didn't actually get wiped I just couldn't access it after the crash, a reboot brought it back to life although the recordings that took place before the crash never saved to the hdd.
Ok same again this morning but this time no recordings took place, box had crashed and produced the same crash log.
What plugins do you have installed exactly? Full list please.
Ok same again this morning but this time no recordings took place, box had crashed and produced the same crash log.
That crashlog might be handy too...
I've just spent a long period of time testing with embedded Autobouquetsmaker and crossepg, no issues found.
I'd advise you USB re-flash. Use embedded Autobouqeurtsmaker. Ensure EPG data is stored on an external storage device.
After re-flashing make sure your USB HDD is mount on /media/hdd, blue button > ViX > Mount manager.
Do not install ANY extra plugins when testing.
if you have a working Edison already upstairs, can't you take a total image of that box and restore to the 'faulty' one and see what happens?
Ok thanks for your help I'm going to try what danlou has suggested and try using a back up from the working edision, if that fails i will set up from scratch with your suggestions and test over the weekend and report back.
Ok tried with the back up from my other edision and still the same problem so I'm going to set up from scratch as suggested, I do find it strange that the exact same setup on my single tuner edision works fine, but I'm only having this problem on the dual tuner.
Ok so I've done what you said sicilian, fresh flash from usb, using standard abm with no plugins installed, epg data to hdd and I still have the problem, recording on tuner b and cross epg gets stuck at reading titles 293kb on tuner a! I'm going to try a earlier version of vix and see if it happens on that.
Vix 4.1 001 still the same problem, refuses to download on tuner A, so do you think I have a tuner problem? Because I'm at a loss as to what's wrong I've done all that's been suggested to no avail.
abu baniaz
04-05-16, 19:36
Can you do following please?
1. enable debug logs,
2. restart,
3. repeat process.
4. Attach debug log
Debug logging is enabled as follows:
Menu -> Setup -> System -> Logs -> Enable debug logs = yes, and then GUI Restart.
Default location for logs is /home root/logs
Save to PC then upload as an attachment please
have you put the 'faulty' box upstairs and the good one downstairs as that will eliminate cable issue i suppose?
Defiantly not a cable issue I've swapped the two round in the faulty box and still always gets stuck on tuner a, if I put the cable from tuner a into b it downloads fine, if I put the cable from tuner b to tuner a I still get the problem.
Ok so I've done what you said sicilian, fresh flash from usb, using standard abm with no plugins installed, epg data to hdd and I still have the problem, recording on tuner b and cross epg gets stuck at reading titles 293kb on tuner a! I'm going to try a earlier version of vix and see if it happens on that.
How do you know recording is using tuner b? If both tuners are for Astra 28.2? In standby crossepg would use 1st free tuner. So if recording a would be used 1st and crossepg 2nd on b.
Contact wos and let them check the unit out. You might even have an lnb issue when both tuners are being used.
I obviously can't tell that in standby, but if I set up a recording I can see its using tuner b so run the download on tuner a and that's when it gets stuck, if I do the scan on tuner b it completes, I can't see this being an lnb issue as my previous box worked fine right up until I swapped it for the edision.
One thing I didn't test was record and run crossepg, will test that hopefully tomorrow.
Sent from my iPhone using Tapatalk
abu baniaz
04-05-16, 20:40
Debug logs provide extra detail/clarification and maybe even confirmation. :)
If it was an lnb issue then surely I wouldn't complete a scan of 935 channels and I would have problems when viewing? Both snr and agc are in the 90's on tuner A but please correct me if I'm wrong again thanks for your help.
One thing I didn't test was record and run crossepg, will test that hopefully tomorrow.
Sent from my iPhone using Tapatalk
Not telling you to suck eggs Sicilian but did you run cross epg on tuner A?
Ive seen quad lnb outputs fail with 2-3 outputs being used at the same time.
Anyway I'll test recording and run cross at sametime tomorrow.
Sent from my iPhone using Tapatalk
abu baniaz
04-05-16, 20:48
he is using a communal system
I've done more testing on this with a Edision Twin and VU+ Duo. I can confirm the following this is NOT specific to the Edision OS Mini. VU+ Duo does the samething, you do not have a hardware issue.
Looks like you've found a CrossEPG bug that is presnet when Tuner A is forced to download EPG data and recordings are happening at the sametime on Tuner B. Seems to only affect twin tuner receivers.
To replicate, do not have any recordings running when testing:
1) Switch to BBC One HD > Receiver will use Tuner A provide no recording
2) Press EPG > Select ITV HD > Press Green to Add timer > Recording on ITV HD will now commence using Tuner B.
3) Blue button > CrossEPG Downloader > Crossepg will now try to download, but will lock and fail.
I'll make a bug report in our dev room.
Thank you for confirming this I will run another test when I'm home from work just to confirm thanks again!
I've just confirmed the same bug in a higher spec 1.3GHz TM-Nano 2 super as well. Your going to have to make sure your recordings don't clash with CrossEPG download for now, until if and when this bug can be fixed.
Ok tested this again and it causes cross epg to freeze on tuner a, thanks again for taking the time to test this and put my mind at rest that it's not a problem with my box or satellite system.
Ok tested this again and it causes cross epg to freeze on tuner a, thanks again for taking the time to test this and put my mind at rest that it's not a problem with my box or satellite system.
Hardware is, your the just the 1st to find this bug.
abu baniaz
05-05-16, 22:06
This has been fixed an will be in next image.
If you cannot wait, download and extract this file. Place in /usr/lib/enigma2/python/Plugins/SystemPlugins/CrossEPG
Restart and try again.
EDIT:
Attachment removed.
Has this been fixed in 4.1 008?
Has this been fixed in 4.1 008?
Please test, should be ok.
Yes can confirm that the problem is gone in the latest image.
Right this is getting silly now, again woke up this morning to box out of standby, and another crash log the same as the one I posted previously related to cross epg, no recordings set up and cross epg set to download at 5.30am, box in the bedroom set up exactly the same has no problem so I'm at a toatal loss as to what's going on here. Cross epg also failed to download yesterday morning but didn't crash the box.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.