Auto Download

[nibbenjamin]

Does Crossepg run a scheduled download once a day when the box is in standby for do you have to leave the box switched on overnight?

[ronand]

Just set a powertimer to wake the box up from deep standby a few minutes before your scheduled task.

[nibbenjamin]

Guys thanks for above Ive activated powertimer and works for autobouquet but Crossepg does not seem to auto download at requested time (0415) - i have to manually download in order for it to work.

Any ideas?

[Andy_Hazza]

Guys thanks for above Ive activated powertimer and works for autobouquet but Crossepg does not seem to auto download at requested time (0415) - i have to manually download in order for it to work.

Any ideas?

What receiver do you have?

[nibbenjamin]

Edision Mini

[Andy_Hazza]

Edision Mini

How do you have your EPG setup?

[nibbenjamin]

http://uploads.tapatalk-cdn.com/20160413/3c644eb0e7556c31e01237a01cf47ddb.jpg

[nibbenjamin]

Not sure it that ms the info you were after?

[nibbenjamin]

http://uploads.tapatalk-cdn.com/20160413/5076a5824d0d647d39801cc90f8407e2.jpg

[Andy_Hazza]

Do me a favour and get rid of the power timer, not needed at all. This is how I want you to setup your EPG. Follow these steps.
1/ Menu > Setup > System > EPG > CrossEPG
a/ Configure > Schedule download = once a day and set a time you want to schedule a time to download. (As a tip do 15mins after ABM scheduled time, so if you have ABM to run at 4am, do CrossEPG to run at 4:15am) Now green button to save.
b/ OpenTV providers > select Sky UK OpenTV and green button to save.
Exit once and go into EPG Settings > set EPG location to either HDD (1st Choice) or USB Flash Drive (2nd Choice) *DO NOT STORE EPG DATA TO INTERNAL FLASH* then green button to save and exit all the way out back to your tv.
2/ Press the blue button, CrossEPG Downloader. This will now populate your 7 day guide. Thats it, all done!! Just put your receiver into Standby mode every night and your scheduled CrossEPG will run just fine. NO NEED FOR THE POWER TIMER, GET RID!!

Regards,


Sent from my iPhone using Tapatalk

[nibbenjamin]

OK Andy - appreciate the help - will try it as you state tonight and let you know[emoji106]

[Andy_Hazza]

OK Andy - appreciate the help - will try it as you state tonight and let you know[emoji106]

Fingers x'd buddy. Had you done anything different to my recommended settings?

[nibbenjamin]

No that's exactly how I had it set up! How should the initial EPG screen be set up - does this look OK?http://uploads.tapatalk-cdn.com/20160413/1d0d8b07dad3c8fcb489746401414a48.jpg

[Andy_Hazza]

No they not right. From EPG location follows these;
hdd
epg
no
no
yes
yes
no
yes
yes
yes
yes
0
yes
yes
Green button to save that and take another pic for me please.


Sent from my iPhone using Tapatalk

[nibbenjamin]

Better? [emoji16]http://uploads.tapatalk-cdn.com/20160413/75849f874c48f08d9ff3e4cfe1261856.jpg

[Andy_Hazza]

Thats better. [emoji1360]


Sent from my iPhone using Tapatalk

[nibbenjamin]

Cool - will let you know how it goes! [emoji106] Thanks again! [emoji16]

[Andy_Hazza]

As a test to see if it works you could always change the scheduled time to 19:20 and then save n put the box into standby n then see if it works. Or you can just leave as it is and see what happens in the morning. [emoji4]


Sent from my iPhone using Tapatalk

[nibbenjamin]

Hahaha I just tried that and it didn't work! [emoji19]

[nibbenjamin]

It's very strange cos my VU Duo works set up like this no problem at all! [emoji848]

[Andy_Hazza]

Hhhmmmm. Strange. What happens? With your Vu+ Duo I'm guessing you have a swap file enabled?


Sent from my iPhone using Tapatalk

[nibbenjamin]

Does Crossepg work in "download hourly in standby" mode?

[mrxbox360]

would this setup be ok running on a vu solo2 in the uk

[nibbenjamin]

As I stated above it works fine on my Vu Duo but my Edision Mini still won't do it! [emoji19]

[nibbenjamin]

Hhhmmmm. Strange. What happens? With your Vu+ Duo I'm guessing you have a swap file enabled?


Sent from my iPhone using Tapatalk

Not that I'm aware of Andy! [emoji848]

[nibbenjamin]

Oh well manual download daily it it then! [emoji848]

[abu baniaz]

1. How many satellite tuners do you have?
2. How many signal wires do you have connected to the receiver?
3. What is eact tuner confiured as? (answer separately for each tuner please)
4. Are all the signal wires direct from the LNB, i.e no splitters etc used.
5. Are you using AutoBouquetsMaker or AutoBouquets 28.2?

[nibbenjamin]

1. How many satellite tuners do you have? 2
2. How many signal wires do you have connected to the receiver? 2
3. What is eact tuner confiured as? (answer separately for each tuner please) Simple for both
4. Are all the signal wires direct from the LNB, i.e no splitters etc used. Yes
5. Are you using AutoBouquetsMaker or AutoBouquets 28.2? AutoBouqetsMaker as standard with vix

[judge]

AutoBouqetsMaker as standard with vix
How to answer 5 questions if you want support, eh?

[nibbenjamin]

The answers are in the quote mate!
Only just noticed that the last one was outside the quote. Difficult to highlight them in tapatalk

[nibbenjamin]

1. How many satellite tuners do you have? 2
2. How many signal wires do you have connected to the receiver? 2
3. What is eact tuner confiured as? (answer separately for each tuner please) Simple Configuration 28.2E for both
4. Are all the signal wires direct from the LNB, i.e no splitters etc used. Yes direct
5. Are you using AutoBouquetsMaker or AutoBouquets 28.2? AutoBouquetsMaker as standard with Vix

Answers in quote thanks Abu!

Tidied up for the sake of Judge!

[judge]

Ah, my bad, sorry. Read original unedited post as only 1 answer.

Have you enabled debug logs? No reason one box should differ from the other in regard to this.

[nibbenjamin]

Ah, my bad, sorry. Read original unedited post as only 1 answer.

Have you enabled debug logs? No reason one box should differ from the other in regard to this.

No probs fella! Yes it's very strange I've tried it all ways and it still won't work! Will check debug logs tonight

[nibbenjamin]

Feck I forgot to respond here - working now - ain't done anything different - as fickle as my wife! [emoji16][emoji16][emoji106]