Openvix 4 0 003 Release Vuduo2 Lockup

[chuf]

Hi All

Had this happen twice now when ive changed channel just get the vix rotating symbol in left hand top side of screen and box becomes unresponsive, only way to get it back again is with a power off of the unit (Can still telnet to the unit)
Anyone else had this issue or could be possible cause? :confused:
I have enabled logs just in case.
Thanks
Chuf

[Toja60]

Hi all!

Exactly the same with my vuduo2, had to power off two times yesterday evening after that it locked up.

Looks to be ok today, so far ...

Thanks
Toja60

[chuf]

Hi
What version you running?
Chuf


Hi all!

Exactly the same with my vuduo2, had to power off two times yesterday evening after that it locked up.

Looks to be ok today, so far ...

Thanks
Toja60

[Toja60]

Openvix 4.0 003.

[john doe]

do you flash with usb or crouch, with setting restore?

[chuf]

Hi
Flashed with Usb and did a full clean install.......don't have much running on the system plugin wise.......

do you flash with usb or crouch, with setting restore?

[john doe]

i would reflash and restore again. if you still have same issue then go into home/logs and attached them here

[chuf]

Will do.....
Thanks for the reply back :thumbsup:
Chuf

[john doe]

Will do.....
Thanks for the reply back :thumbsup:
Chuf

let people know if it works

[chuf]

let people know if it works

Well did a clean install on the 2nd(Defaulted box back to scratch and did not do a restore backup) and so far no lockup....will update if anything changes......

Chuf. :cool:

[chuf]

Hi All

Well its happened again and the other half ant happy :mad:
Watching tipping point and Wham vix icon just appears out of la blue spinning top left corner.
Telnet and FTP still working no response from unit......poweroff in telnet and restart backup and running
Ive downloaded the log file but this is like nearly 300 meg? I take it this is the wrong file?

Chuf

[Bazzer]

Have you tried a fresh flash via Image Manager and which plugins have you got installed

[chuf]

Hi

Have done fresh flash.
Plugins loaded are:
cross epg downloader
iptv
lcd for Linux
firmware upgrade
media scanner
openwebif
picture player
tsmedia
xmltv importer
transcoding

[Bazzer]

Have you tried running without any plugins installed to see if it happens . At least that way you will see if it is a plugin that is causing your issue

[abu baniaz]

Are you installing the older webif or using the default one?

[chuf]

Are you installing the older webif or using the default one?


using the default one

[abu baniaz]

Do you get any issues if you do not install any additional plugins?

[john doe]

Hi All

Well its happened again and the other half ant happy :mad:
Watching tipping point and Wham vix icon just appears out of la blue spinning top left corner.
Telnet and FTP still working no response from unit......poweroff in telnet and restart backup and running
Ive downloaded the log file but this is like nearly 300 meg? I take it this is the wrong file?

Chuf

have you tried to upload the log fine? 300mb is big. go to ftp/home/root/logs and upload here

[chuf]

have you tried to upload the log fine? 300mb is big. go to ftp/home/root/logs and upload here

Hi
I can get the log from the system.how on earth do I attach the zip file to the post? (Its been a while)

[birdman]

have you tried to upload the log fine? 300mb is big. go to ftp/home/root/logs and upload here300MB sound like a log from ~100 days uptime(?).
Given the recent fresh flash(es) that sounds unlikely.
So, where did chuf find this log, and what name does it have?

[birdman]

Hi
I can get the log from the system.how on earth do I attach the zip file to the post? (Its been a while)Go to Advanced mode and click on the paper clip.

[chuf]

300MB sound like a log from ~100 days uptime(?).
Given the recent fresh flash(es) that sounds unlikely.
So, where did chuf find this log, and what name does it have?

Hi Log name: Enigma2-2016-04-04_23-20-25.log

[chuf]

47612
pic attached

[chuf]

part of log file after the last bit it just keeps on repeating itself.....
*** Error in `/usr/bin/enigma2': free(): invalid pointer: 0x6f68206d ***
[MAIN] executing main
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
cleaning up
TuxTxt cache cleared
TuxTxt cache cleared
< 61173.675> PC: 7698f1b0
< 61173.675> 00000000 00000000 00000000 73d328e0
< 61173.675> 000002f0 00000306 00000006 00000000
< 61173.675> 00000001 0000000b 73d28778 00000000
< 61173.675> 76b1bdb4 76aa3370 00000000 00000000
< 61173.675> 76ab96e4 76ac1000 76ac1000 73d29810
< 61173.675> 73d298f8 00000001 764cf000 00000005
< 61173.675> 00000018 7698f150 ffffffff 00000000
< 61173.676> 76abfe10 73d29768 73d29990 76990b5c
< 61173.679> Backtrace:
< 61173.679> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45D884]
< 61173.679> /lib/libc.so.6(gsignal) [0x7698F1B2]
< 61173.679> -------FATAL SIGNAL (6)
< 61173.680> PC: 76f62008
< 61173.680> 00000000 00000001 770a0f10 770ce2e4
< 61173.680> 00000000 6b179490 00000000 74d1dafc
< 61173.680> 80808080 73d29106 00000000 00687461
< 61173.680> 76ab1000 769d1000 0000016d 00660000
< 61173.680> 6b179490 76f75584 718aa1e8 6b179490
< 61173.680> 73d298f8 00000001 00598164 00000005
< 61173.680> 0065f8f4 76f61fcc 76d21110 00000000
< 61173.680> 770cfe10 73d28f60 73d29990 7700c9f0
< 61173.681> Backtrace:
< 61173.681> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45D884]
< 61173.681> /usr/lib/libpython2.7.so.1.0(PyObject_Call) [0x76F6200A]
< 61173.681> -------FATAL SIGNAL (11)
< 61173.681> PC: 76f62008
< 61173.681> 00000000 00000001 770a0f10 770ce2e4
< 61173.681> 00000000 6b179490 00000000 74d1dafc
< 61173.681> 80808080 73d29106 00000000 00687461
< 61173.681> 76ab1000 769d1000 0000016d 00660000
< 61173.681> 6b179490 76f75584 718aa1e8 6b179490
< 61173.681> 73d298f8 00000001 00598164 00000005
< 61173.681> 0065f8f4 76f61fcc 76d21110 00000000
< 61173.681> 770cfe10 73d28f60 73d29990 7700c9f0
< 61173.682> Backtrace:
< 61173.682> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45D884]
< 61173.682> /usr/lib/libpython2.7.so.1.0(PyObject_Call) [0x76F6200A]
< 61173.682> -------FATAL SIGNAL (11)
< 61173.682> PC: 76f62008
< 61173.682> 00000000 00000001 770a0f10 770ce2e4
< 61173.682> 00000000 6b179490 00000000 74d1dafc
< 61173.682> 80808080 73d29106 00000000 00687461
< 61173.682> 76ab1000 769d1000 0000016d 00660000
< 61173.682> 6b179490 76f75584 718aa1e8 6b179490
< 61173.682> 73d298f8 00000001 00598164 00000005
< 61173.682> 0065f8f4 76f61fcc 76d21110 00000000
< 61173.682> 770cfe10 73d28f60 73d29990 7700c9f0
< 61173.683> Backtrace:
< 61173.683> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45D884]
< 61173.683> /usr/lib/libpython2.7.so.1.0(PyObject_Call) [0x76F6200A]
< 61173.683> -------FATAL SIGNAL (11)
< 61173.683> PC: 76f62008
< 61173.683> 00000000 00000001 770a0f10 770ce2e4
< 61173.683> 00000000 6b179490 00000000 74d1dafc
< 61173.683> 80808080 73d29106 00000000 00687461
< 61173.683> 76ab1000 769d1000 0000016d 00660000
< 61173.683> 6b179490 76f75584 718aa1e8 6b179490
< 61173.683> 73d298f8 00000001 00598164 00000005
< 61173.683> 0065f8f4 76f61fcc 76d21110 00000000
< 61173.683> 770cfe10 73d28f60 73d29990 7700c9f0
< 61173.684> Backtrace:
< 61173.684> /usr/bin/enigma2(_Z17handleFatalSignaliP9siginfo_tPv) [0x45D884]
< 61173.684> /usr/lib/libpython2.7.so.1.0(PyObject_Call) [0x76F6200A]
< 61173.684> -------FATAL SIGNAL (11)

[birdman]

Ive downloaded the log file but this is like nearly 300 meg? I take it this is the wrong file?The log manager limits the size of the log to a maximum of 10MB (you can drop it down to 1MB, but not turn it off). When the log gets to this size it start to overwrite from the beginning.
Are you sure this isn't just 300kB? (Particularly since the 4194304 in the first two entries would then correspond to exactly 4MB - which I suspect is what you have the maximum log-size set to).

[birdman]

part of log file after the last bit it just keeps on repeating itself.....
*** Error in `/usr/bin/enigma2': free(): invalid pointer: 0x6f68206d ***That shouldn't happen, but any information on what might be causing this would be in the lines before this.
The ones after are just caused by it being unable to get out of a state it's never supposed to be in.

[chuf]

That shouldn't happen, but any information on what might be causing this would be in the lines before this.
The ones after are just caused by it being unable to get out of a state it's never supposed to be in.

More Info....
59437.368> [eDVBPCR0] DEMUX_STOP ok
< 59437.368> [eDVBPCR0] destroy
< 59437.368> [eDVBVideo0] DEMUX_STOP ok
< 59437.369> [eDVBVideo0] VIDEO_STOP ok
< 59437.372> [eDVBVideo0] destroy
< 59437.372> [eDVBAudio0] AUDIO_STOP ok
< 59437.398> [eDVBAudio0] DEMUX_STOP ok
< 59437.398> [eDVBAudio0] AUDIO_CONTINUE ok
< 59437.404> [eDVBAudio0] destroy
< 59437.404> [eDVBText0] DEMUX_STOP ok
< 59437.404> [eDVBText0] destroy
< 59437.408> [Config] getResolvedKey config.usage.remote_fallback empty variable.
< 59437.441> [eDVBServicePlay] timeshift
< 59437.444> [eDVBServicePlay] timeshift
< 59437.446> [eDVBServicePlay] timeshift
< 59437.449> [Notifications] RemovePopup, id = ZapError
< 59437.449> [eDVBLocalTimerHandler] remove channel 0x137d5a0
< 59437.450> [eEPGCache] remove channel 0x137d5a0
< 59437.450> [eEPGCache] abort caching events !!
< 59437.458> [eDVBResourceManager] allocate channel.. 0812:0002
< 59437.462> [eDVBFrontend] (0)tune
< 59437.462> [eDVBSatelliteEquipmentControl] RotorCmd ffffffff, lastRotorCmd ffffffff
< 59437.462> [eDVBFrontend] prepare_sat System 1 Freq 11097000 Pol 1 SR 23000000 INV 2 FEC 3 orbpos 282 system 1 modulation 2 pilot 2, rolloff 1
< 59437.462> [eDVBFrontend] tuning to 1347 mhz
< 59437.462> [eDVBChannel] OURSTATE: tuner 0 tuning
< 59437.462> [eDVBServicePMTHandler] allocate Channel: res 0
< 59437.463> [eDVBCIInterfaces] addPMTHandler 1:0:19:5226:812:2:11A0000:0:0:0::ITV Central West HD
< 59437.463> [eDVBChannel] getDemux cap=00
< 59437.463> [eDVBResourceManager] allocate demux cap=00
< 59437.463> [eDVBResourceManager] allocating demux adapter=0, demux=0, source=0 fesource=0
< 59437.463> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59437.463> [Notifications] RemovePopup, id = Parental control
< 59437.545> [gAccel] alloc failed
< 59437.546> [gSurface] ERROR: accelAlloc failed
< 59437.563> [gAccel] alloc failed
< 59437.563> [gSurface] ERROR: accelAlloc failed
< 59437.580> [gAccel] alloc failed
< 59437.581> [gSurface] ERROR: accelAlloc failed
< 59437.604> [gAccel] alloc failed
< 59437.604> [gSurface] ERROR: accelAlloc failed
< 59437.621> [gAccel] alloc failed
< 59437.621> [gSurface] ERROR: accelAlloc failed
< 59437.639> [gAccel] alloc failed
< 59437.639> [gSurface] ERROR: accelAlloc failed
< 59437.657> [gAccel] alloc failed
< 59437.657> [gSurface] ERROR: accelAlloc failed
< 59437.674> [eDVBFrontend] set static current limiting
< 59437.675> [eInputDeviceInit] 0 160 1
< 59437.677> [InfoBarGenerics] KEY: 352 OK
< 59437.679> [ActionMap] OkCancelActions OK
< 59437.679> [ActionMap] unknown action OkCancelActions/OK! typo in keymap?
< 59437.679> [ActionMap] OkCancelActions OK
< 59437.680> [ActionMap] unknown action OkCancelActions/OK! typo in keymap?
< 59437.681> [eDVBFrontend] invalidate current switch params
< 59437.681> [eDVBFrontend] set sequence pos 3
< 59437.682> [eDVBFrontend] tuner 0 setTone 0
< 59437.698> [eDVBFrontend] tuner 0 sleep 10ms
< 59437.708> [eDVBFrontend] update current switch params
< 59437.709> [eDVBFrontend] tuner 0 startTuneTimeout 5000
< 59437.709> [eDVBFrontend] tuner 0 setFrontend: events enabled
< 59437.709> [eDVBFrontend] setting frontend 0 events: on
< 59438.361> [eDVBFrontend] (0)fe event: status 0, inversion off, m_tuning 1
< 59438.362> [eDVBFrontend] tuner 0 sleep 500ms
< 59438.480> [eDVBServicePlay] timeshift
< 59438.480> [eDVBServicePlay] timeshift
< 59438.544> [eDVBFrontend] (0)fe event: status 1f, inversion off, m_tuning 2
< 59438.544> [eDVBChannel] OURSTATE: tuner 0 ok
< 59438.544> [eDVBLocalTimerHandler] channel 0x137d5a0 running
< 59438.544> [eDVBChannel] getDemux cap=00
< 59438.544> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBSectionReader] DMX_SET_FILTER pid=20
< 59438.545> [eEPGCache] channel 0x137d5a0 running
< 59438.545> [eDVBChannel] getDemux cap=00
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.545> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.546> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.546> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.546> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.546> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.546> [eEPGCache] next update in 2 sec
< 59438.546> [eDVBResourceManager] stop release channel timer
< 59438.546> [eDVBChannel] getDemux cap=00
< 59438.546> [eDVBServicePMTHandler] ok ... now we start!!
< 59438.546> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 59438.546> [eDVBServicePlay] have 1 video stream(s) (0910), and 1 audio stream(s) (0912), and the pcr pid is 0910, and the text pid is 0913
< 59438.546> [eDVBChannel] getDemux cap=01
< 59438.546> [eDVBResourceManager] allocate demux cap=01
< 59438.546> [eDVBResourceManager] allocating shared demux adapter=0, demux=0, source=0
< 59438.550> [eTSMPEGDecoder] decoder state: play, vpid=0910, apid=0912
< 59438.551> [eDVBPCR0] DMX_SET_PES_FILTER pid=0x0910 ok
< 59438.551> [eDVBPCR0] DEMUX_START ok
< 59438.554> [eDVBAudio0] DMX_SET_PES_FILTER pid=0x0912 ok
< 59438.554> [eDVBAudio0] DEMUX_START ok
< 59438.554> [eDVBAudio0] AUDIO_SET_BYPASS bypass=0 ok
< 59438.570> [eDVBAudio0] AUDIO_PAUSE ok
< 59438.572> [eDVBAudio0] AUDIO_PLAY ok
< 59438.581> [eDVBVideo] Video Device: /dev/dvb/adapter0/video0
< 59438.581> [eDVBVideo] demux device: /dev/dvb/adapter0/demux0
< 59438.584> [eDVBVideo0] VIDEO_SET_STREAMTYPE 1 - ok
< 59438.587> [eDVBVideo0] DMX_SET_PES_FILTER pid=0x0910 ok
< 59438.587> [eDVBVideo0] DEMUX_START ok
< 59438.587> [eDVBVideo0] VIDEO_FREEZE ok
< 59438.590> [eDVBVideo0] VIDEO_PLAY ok
< 59438.598> [eDVBText0] DMX_SET_PES_FILTER pid=0x0913 ok
< 59438.598> [eDVBText0] DEMUX_START ok
< 59438.598> [eDVBVideo0] VIDEO_SLOWMOTION 0 ok
< 59438.601> [eDVBVideo0] VIDEO_FAST_FORWARD 0 ok
< 59438.604> [eDVBVideo0] VIDEO_CONTINUE ok
< 59438.607> [eDVBAudio0] AUDIO_CONTINUE ok
< 59438.612> [eDVBTeletextParser] Starting!
< 59438.612> [eDVBTeletextParser] disable teletext subtitles page ffffffffffffffff (und)
< 59438.612> [eDVBPESReader] Created. Opening demux
< 59438.612> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.613> [eDVBTeletextParser] created teletext subtitle PES reader!
< 59438.613> [eDVBPESReader] Created. Opening demux
< 59438.613> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.613> [eDVBTeletextParser] starting PES reader on pid=0913
< 59438.613> [eDVBPESReader] DMX_SET_PES_FILTER pid=0913
< 59438.614> [eDVBServicePlay] timeshift
< 59438.621> [eDVBServicePlay] timeshift
< 59438.621> [eDVBServicePlay] timeshift
< 59438.751> [eDVBCAService] new service 1:0:19:5226:812:2:11A0000:0:0:0::ITV Central West HD
< 59438.751> [eDVBCAService] add demux 0 to slot 0 service 1:0:19:5226:812:2:11A0000:0:0:0::ITV Central West HD
< 59438.751> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.752> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 59438.771> [eDVBServicePlay] timeshift
< 59438.827> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.828> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 59438.832> [Notifications] RemovePopup, id = ZapError
< 59438.832> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.832> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 59438.846> [eInputDeviceInit] 1 160 1
< 59438.861> [InfoBarGenerics] KEY: 352 OK
< 59438.862> [ActionMap] OkCancelActions ok
< 59438.894> [eDVBServicePMTHandler] PATready
< 59438.895> [eDVBServicePMTHandler] use pmtpid 0105 for service_id 5226
< 59438.895> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.895> [eDVBSectionReader] DMX_SET_FILTER pid=261
< 59438.896> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59438.896> [eDVBSectionReader] DMX_SET_FILTER pid=0
< 59438.897> [eDVBFrontend] set dynamic current limiting
< 59438.907> [eDVBServicePlay] timeshift
< 59439.140> [eInputDeviceInit] 0 160 1
< 59439.142> [InfoBarGenerics] KEY: 352 OK
< 59439.143> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.144> [eDVBSectionReader] DMX_SET_FILTER pid=258
< 59439.144> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.144> [eDVBSectionReader] DMX_SET_FILTER pid=17
< 59439.147> [eDVBServicePlay] eventNewProgramInfo timeshift_enabled=0 timeshift_active=0
< 59439.150> [eDVBServicePlay] have 1 video stream(s) (0910), and 2 audio stream(s) (0911, 0912), and the pcr pid is 0910, and the text pid is 0913
< 59439.151> [eTSMPEGDecoder] decoder state: play, vpid=0910, apid=0912
< 59439.264> [eDVBCIInterfaces] gotPMT
< 59439.264> [eDVBCAService] don't build/send the same CA PMT twice
< 59439.264> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.264> [eDVBSectionReader] DMX_SET_FILTER pid=261
< 59439.331> [Dish] tuning failed
< 59439.338> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.338> [eDVBSectionReader] DMX_SET_FILTER pid=257
< 59439.531> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.531> [eDVBSectionReader] DMX_SET_FILTER pid=260
< 59439.739> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.739> [eDVBSectionReader] DMX_SET_FILTER pid=261
< 59439.772> [eDVBServicePlay] timeshift
< 59439.939> [eDVBVideo0] VIDEO_GET_EVENT SIZE_CHANGED 1920x1080 aspect 3
< 59439.944> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59439.944> [eDVBSectionReader] DMX_SET_FILTER pid=256
< 59439.950> [VideoHardware] setting aspect: 16:9
< 59439.951> [VideoHardware] setting wss: auto
< 59439.952> [VideoHardware] setting policy: bestfit
< 59439.954> [VideoHardware] setting policy2: scale
< 59440.068> [eDVBServicePlay] timeshift
< 59440.069> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 59440.069> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 59440.553> [eEPGCache] start caching events(1459867768)
< 59440.553> [eDVBSectionReader] DMX_SET_FILTER pid=211
< 59440.554> [eDVBSectionReader] DMX_SET_FILTER pid=561
< 59440.555> [eDVBSectionReader] DMX_SET_FILTER pid=3842
< 59440.556> [eDVBSectionReader] DMX_SET_FILTER pid=3003
< 59440.556> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 59440.558> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 59440.560> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 59440.871> [eDVBServicePlay] timeshift
< 59440.872> [eDVBServicePlay] timeshift
< 59441.069> [eDVBServicePlay] timeshift
< 59445.738> [eDVBLocalTimerHandler] diff is 1
< 59445.738> [eDVBLocalTimerHandler] diff < 120 .. use Transponder Time
< 59445.738> [eDVBLocalTimerHandler] set RTC Time
< 59445.849> [eDVBLocalTimerHandler] update RTC
< 59445.849> [eDVBLocalTimerHandler] time update to 15:49:34
< 59445.849> [eDVBLocalTimerHandler] m_time_difference is 1
< 59445.849> [eDVBLocalTimerHandler] set Linux Time
< 59445.850> [eDVBChannel] getDemux cap=00
< 59447.561> [eEPGCache] abort non avail schedule reading
< 59447.563> [eEPGCache] abort non avail schedule other reading
< 59447.564> [eEPGCache] abort non avail mhw reading
< 59447.734> [eEPGCache] nownext finished(1459867776)
< 59476.119> [eDVBServicePlay] timeshift
< 59476.120> [eDVBServicePlay] timeshift
< 59525.246> [eEPGCache] FS subtable (61cc0b00) version changed (6) now/next (1)
< 59536.138> [eDVBServicePlay] timeshift
< 59536.139>

[chuf]

That shouldn't happen, but any information on what might be causing this would be in the lines before this.
The ones after are just caused by it being unable to get out of a state it's never supposed to be in.

[eDVBServicePlay] timeshift
< 59536.443> [NetworkTime] setting E2 time: 1459867865.37
< 59596.173> [eDVBServicePlay] timeshift
< 59596.174> [eDVBServicePlay] timeshift
< 59656.175> [eDVBServicePlay] timeshift
< 59656.176> [eDVBServicePlay] timeshift
< 59679.707> [eEPGCache] FS subtable (60cc0b00) version changed (16) now/next (1)
< 59711.341> [AutoTimer] Auto Poll
< 59711.341> [AutoTimer] Auto Poll Started
< 59711.342> [AutoTimer] No changes in configuration, won't parse
< 59711.342> [eEPGCache] event 00c7 not found in epgcache
< 59711.347> [Task] job Components.Task.Job name=AutoTimer #tasks=0 completed with [] in None
< 59716.281> [eDVBServicePlay] timeshift
< 59716.281> [eDVBServicePlay] timeshift
< 59723.095> [eEPGCache] FS subtable (61cc0b00) version changed (7) now/next (1)
< 59776.209> [eDVBServicePlay] timeshift
< 59776.210> [eDVBServicePlay] timeshift
< 59803.084> [eEPGCache] FS subtable (60cc0800) version changed (29) now/next (1)
< 59803.625> [eEPGCache] FS subtable (61189d00) version changed (19) now/next (1)
< 59803.911> [eEPGCache] FS subtable (6118d900) version changed (19) now/next (1)
< 59804.037> [eEPGCache] FS subtable (6118cf00) version changed (19) now/next (1)
< 59804.179> [eEPGCache] FS subtable (6118c500) version changed (19) now/next (1)
< 59804.531> [eEPGCache] FS subtable (61283d00) version changed (19) now/next (1)
< 59804.669> [eEPGCache] FS subtable (61283f00) version changed (19) now/next (1)
< 59804.813> [eEPGCache] FS subtable (61284100) version changed (19) now/next (1)
< 59804.949> [eEPGCache] FS subtable (61284200) version changed (19) now/next (1)
< 59805.084> [eEPGCache] FS subtable (61284700) version changed (19) now/next (1)
< 59807.982> [eEPGCache] FS subtable (61191500) version changed (19) now/next (1)
< 59808.294> [eEPGCache] FS subtable (61192900) version changed (19) now/next (1)
< 59808.429> [eEPGCache] FS subtable (61193d00) version changed (19) now/next (1)
< 59808.576> [eEPGCache] FS subtable (61193300) version changed (19) now/next (1)
< 59808.709> [eEPGCache] FS subtable (61194700) version changed (19) now/next (1)
< 59809.271> [eEPGCache] FS subtable (61287100) version changed (19) now/next (1)
< 59809.443> [eEPGCache] FS subtable (61287200) version changed (19) now/next (1)
< 59809.548> [eEPGCache] FS subtable (61287400) version changed (19) now/next (1)
< 59809.689> [eEPGCache] FS subtable (61287900) version changed (22) now/next (1)
< 59810.523> [eEPGCache] FS subtable (611b1d00) version changed (19) now/next (1)
< 59810.661> [eEPGCache] FS subtable (611b1f00) version changed (21) now/next (1)
< 59819.796> [eEPGCache] FS subtable (6122c500) version changed (20) now/next (1)
< 59819.935> [eEPGCache] FS subtable (6122cf00) version changed (19) now/next (1)
< 59834.226> [eEPGCache] FS subtable (61cc0800) version changed (26) now/next (1)
< 59836.231> [eDVBServicePlay] timeshift
< 59836.231> [eDVBServicePlay] timeshift
< 59883.711> [eEPGCache] FS subtable (6027fe00) version changed (15) now/next (1)
< 59888.848> [eEPGCache] FS subtable (6027fe00) version changed (16) now/next (1)
< 59896.242> [eDVBServicePlay] timeshift
< 59896.242> [eDVBServicePlay] timeshift
< 59918.161> [eEPGCache] FS subtable (6127fe00) version changed (14) now/next (1)
< 59956.304> [eDVBServicePlay] timeshift
< 59956.305> [eDVBServicePlay] timeshift
< 60002.616> [eDVBServicePlay] timeshift
< 60002.617> [eDVBDemux] open demux /dev/dvb/adapter0/demux0
< 60002.617> [eDVBSectionReader] DMX_SET_FILTER pid=18
< 60003.127> [eDVBServicePlay] timeshift
< 60003.127> [eDVBServicePlay] timeshift
< 60003.617> [eDVBServicePlay] timeshift
< 60016.278> [eDVBServicePlay] timeshift
< 60016.278> [eDVBServicePlay] timeshift
< 60076.298> [eDVBServicePlay] timeshift
< 60076.299> [eDVBServicePlay] timeshift
< 60115.932> [eEPGCache] FS subtable (602eea00) version changed (18) now/next (1)
< 60136.327> [eDVBServicePlay] timeshift
< 60136.328> [eDVBServicePlay] timeshift
< 60142.839> [eEPGCache] FS subtable (612eea00) version changed (21) now/next (1)
< 60178.433> [eInputDeviceInit] 1 160 1
< 60178.434> [InfoBarGenerics] KEY: 352 OK
< 60178.435> [ActionMap] InfobarShowHideActions toggleShow
< 60178.437> [eDVBServicePlay] timeshift
< 60178.663> [eInputDeviceInit] 0 160 1
< 60178.664> [InfoBarGenerics] KEY: 352 OK
< 60180.507> [eInputDeviceInit] 1 6c 1
< 60180.508> [InfoBarGenerics] KEY: 108 DOWN
< 60180.737> [eInputDeviceInit] 0 6c 1
< 60180.738> [InfoBarGenerics] KEY: 108 DOWN
<

[birdman]

It would be simpler just to upload the log.

Are you watching via time-shift, or do you just have it running?

[chuf]

It would be simpler just to upload the log.

Are you watching via time-shift, or do you just have it running?

Hi Log attached.
Zipped up its nearly 18meg............
don't use time shift, if its running then I haven't set it to?
thanks
Chuf

[chuf]

Okies

Done a new install loaded 2 plugins iptv & Tsmedia.

will see how it goes.

Chuf :thumbsup: