Donkeyface's EPG thread

[Donkeyface]

I also have an issue with cross epg and a xt10000, I have had it for a while but waited till 4.0 was released.
It somtimes won't update manually or automatically.
It has been happening since January on v3.2.x.
I have now started a fresh with 4.0 and a new USB stick but issue still there.
The only thing I have copied from 3.2 are my autotimer/timer xml files, no restore.

When epg starts it "reads channels" but when it gets to "read titles" the box locks up. http://uploads.tapatalk-cdn.com/20160329/dac8937712722e1fa8d4029b6e489b90.jpg

I will post log file and crossepg settings tomorrow as I'm on my phone.



Sent from my D5803 using Tapatalk

[IAmATeaf]

When this happens to me I just remove the contents of the crossepg folder on the USB

Sent from my GT-I9505 using Tapatalk

[Donkeyface]

4754947548

I have attached 2 Logs, the one dated 28th was an automatic updated at 4pm, the other dated 29th was a manual update, time for this not sure but should be near end of log file as had to reboot.
Will post settings tomorrow.

[judge]

Only time I've noticed anything like this is when EGP storage device wasn't mounted properly.
Check blue button -> ViX -> Mount Manager to see how it's mounted when you have this issue.

[Donkeyface]

Only time I've noticed anything like this is when EGP storage device wasn't mounted properly.
Check blue button -> ViX -> Mount Manager to see how it's mounted when you have this issue.
Mount looks good, sdb1 and ext4 r/w......
That's the first thing I thought, the xt10000 has an issue after reboot where it doesn't mount the Hdd.


Sent from my D5803 using Tapatalk

[dwarf]

Are you using a motorised dish?

[Donkeyface]

No fixed. I will post screen shots later of settings.

Sent from my D5803 using Tapatalk

[IAmATeaf]

Have you tried removing the contents of the folder /media/usb/crossepg?

[Donkeyface]

Have you tried removing the contents of the folder /media/usb/crossepg?
Not yet, will give it a go when get home.

Sent from my D5803 using Tapatalk

[abu baniaz]

ensure you do so with enigma2 halted, use "init 4" command.

[Donkeyface]

Have you tried removing the contents of the folder /media/usb/crossepg?
Many thanks iamteaf, it seems to have worked.
I have done a manual update and it did a scheduled update today without issues.
Why would deleting the files fixed issue and what are they for?

Thanks




Sent from my D5803 using Tapatalk

[birdman]

4754947548

I have attached 2 Logs, the one dated 28th was an automatic updated at 4pm, the other dated 29th was a manual update, time for this not sure but should be near end of log file as had to reboot.
Will post settings tomorrow.The second one of these finishes with:
< 8956.432> [eDVBRecordFileThread] waiting for aio to complete
< 8956.432> [eDVBRecordFileThread] wait: aio_return returned failure: Interrupted system call
< 8956.432> [eDVBRecordFileThread] Waiting for I/O to complete
< 8957.964> [gRC] main thread is non-idle! display spinner!The only thing I know which does asynchronous I/O is movie recordings - you did have a timeshift running.
Is your /media/hdd an internal disk or a network one?

[Donkeyface]

I do use timeshift, set to start after 5sec.
Media Hdd is internal.

I think it might sorted now anyway but will wait till tomorrow after scehduleded update to be sure.

Thanks birdman

Sent from my D5803 using Tapatalk