Help required with picons

[sanderson2]

Im using a technomate box and vix image 4.0 build 03
Read a lot of threads on here about formatting sd card to 3 or 4
When i try to do this it says file found in fat32 error.
Used ftp to put my picon folder in right place and they still wont show
Any advice is welcomed

[Bazzer]

In your channel selection settings do you have Show Picons in service list to"yes"

[sanderson2]

Yes i do mate
Ive followed lots of guides from internet and settings they all seem to tally up
Ive just found another usb to try to convert to file 4 or what ever it is going to see if the picon folder will load soon as ive done it

[sanderson2]

Ok so found the usb on the ftb control center im using
Uploaded some snp mk picons
Got no displayable medium found on usb message
Deleted the whole folder then added picons by croke
Same message ..
Tried putting the folders into enigma2 folder
Still nothing..
Gone to downloads on the box and i have lots of picon files to choose from snp
And some from tv east but non say 28.2???

[abu baniaz]

Can you post a picture showing the location of your picon folder incluidng full path?

[sanderson2]

Sorry what does one mean full path?

[abu baniaz]

The whole path of the location where you have saved the picons/directory tree.

If that still does not make sense, please say so

[sanderson2]

...............

[sanderson2]

47518
Im really stupid so i hope this is correct

[abu baniaz]

open up the picon folder then take a screenshot.

"PrtScn" will copy what ever is on the screen
"Alt" and "PrtScn" will copy what ever is on the active screen.

You can then paste in mspaint and save/edit the image. Then upload.

Can you also try enabling debug logs and then attaching them. You will find them in /home/root/logs

[sanderson2]

good afternoon i have managed to take a screen shot of the picon folder. i also managed to get into the root and crash log but there is far to much into in ther to save the screen shot as most of it would not be on it?

47520

[abu baniaz]

Your picon layout for that folder is fine.

Crashlog is of no use. Debug log is what will be beneficial. Transfer the debug log from the receiver to your PC. Then attach it to the post. Please attach it, do not paste it.

[abu baniaz]

To enable debug logs:
Menu -> Setup -> System -> Logs -> Enable debug logs = yes
Reboot system for change to take effect.

The default location for debug logs is /home/root/logs

[sanderson2]

47522
hope this is right?

[abu baniaz]

OK, picon path is the one you posted picture of.


< 549.564> [Picon] adding path: /usr/share/enigma2/picon/


I think I know what the issue is. Just to confirm what I am thinking, can you post a scrennshot of your AutoBouquets E2 settings page. Can you alos take a screenshot of a bouquet open, i.e showing the list of channels. There is a guide on screenshots in my signature if you need it.

[sanderson2]

after your request of screen shot of bouqets open i realised that the picon settings were not the same
so after making sure they was both set to usr var picons they now work
thank you
and sorry, im still all new to this

[abu baniaz]

Don't put yourself down. You have done a lot better than others.

Unless you are using the add number to name option, you do not need to use the autopicon feature in AB 28.2

[sanderson2]

47523
I take it that is correct?

[abu baniaz]

Yes, that is fine. The next page shows more details though.

Can you try taking a proper screenshot?

[sanderson2]

Yes but when i press alt prtsc buttons on my lap top it does nothing

[abu baniaz]

Yes but when i press alt prtsc buttons on my lap top it does nothing
That does PC.

Have a look at this
http://www.world-of-satellite.com/showthread.php?44054-How-to-take-screen-shots-How-to-attach-files

[sanderson2]

47531

morning hope this is the right screen you require

[sanderson2]

47532

how can i get rid of the numbers before the picon?