Every Vix Image issue with tuner set up

[sunlight786]

Hi,

I have recently bought vu solo 4k and I have also bought Unicable lnb

I do not like VTi image instead I like OpenVix OR OpenAtv but
every vix image i have issue as there are some option not available when i set my tunner set up

basically my set up is with Unicable as

Tuner A

config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 1
Freq 1210
connected no
Diseq mode none
#####################
Tuner B
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 2
Freq 1420
connected yes
connected to Tuner A >>>>>>>>>>>>>>>>>>>>>>>>>>>> I can connect to Tuner A
Diseq mode none

##################################
Tuner C

config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 3
Freq 1680
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
Diseq mode none

Tuner D

config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 4
Freq 2040
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
######################################
I I leave all tuners unconfigured as some of you may be advice then It do not work very good with recording 3 channels while watching 4th as I have tested already.You have to link them as I have linked them in VTi image to make it run properly.
Can some please help ?
I am using Open Vix 20151202 I have treid latest one but same issue.

Here are the pictures of VTi image tuner set up which allow all these options
Diseq mode none

[Arcy]

I was previously running an Inverto IDLB-QUDL41-UNI1L-1PP LNB with a VIX image. My setup was exactly the same as yours and it worked very well. I imagine that the reason for linking tuner B to Tuner A is that it would otherwise default to the LNB2 input and would then be unavailable to the Unicable configuration.

I'm now using an eight-frequency Unicable system with Tuners C to H all set to "connected = no". I can record from eight different transponders simultaneously using Tuners A to H.

Did you do a clean installation of the Vix image? If it has inherited settings from your VTI image, that might be a cause of trouble.

[sunlight786]

I have manage to get 8 x different freq channels without any issue NOW.I have bought a different Unicable LNB and YES Tuner c to H does not conect and yet we can use/record 8 channels.

I am using now OpenVix 20151202 build.
Crossepge/Autobouquets also work a treat.

Its all sorted now.

[londonnuta]

Does anyone know whether settings above work with vu duo & unicable?

[Arcy]

If you now go to the tuner configuration pages for Tuners C to H and attempt to alter the Advanced setting at the top, I think you will find two new options, FBC feedthrough and FBC Unicable. If you choose FBC Unicable and then Save for each of these tuners in turn, you should get the result you're looking for.