sunlight786
13-02-16, 09:15
Hi,
I have recently bought vu solo 4k and I have also bought Unicable lnb
I do not like VTi image instead I like OpenVix OR OpenAtv but
every vix image i have issue as there are some option not available when i set my tunner set up
basically my set up is with Unicable as
Tuner A
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 1
Freq 1210
connected no
Diseq mode none
#####################
Tuner B
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 2
Freq 1420
connected yes
connected to Tuner A >>>>>>>>>>>>>>>>>>>>>>>>>>>> I can connect to Tuner A
Diseq mode none
##################################
Tuner C
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 3
Freq 1680
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
Diseq mode none
Tuner D
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 4
Freq 2040
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
######################################
I I leave all tuners unconfigured as some of you may be advice then It do not work very good with recording 3 channels while watching 4th as I have tested already.You have to link them as I have linked them in VTi image to make it run properly.
Can some please help ?
I am using Open Vix 20151202 I have treid latest one but same issue.
Here are the pictures of VTi image tuner set up which allow all these options
Diseq mode none
I have recently bought vu solo 4k and I have also bought Unicable lnb
I do not like VTi image instead I like OpenVix OR OpenAtv but
every vix image i have issue as there are some option not available when i set my tunner set up
basically my set up is with Unicable as
Tuner A
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 1
Freq 1210
connected no
Diseq mode none
#####################
Tuner B
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 2
Freq 1420
connected yes
connected to Tuner A >>>>>>>>>>>>>>>>>>>>>>>>>>>> I can connect to Tuner A
Diseq mode none
##################################
Tuner C
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 3
Freq 1680
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
Diseq mode none
Tuner D
config mode advance
satelite 28.2e
LNB Lnb1
priority auto
LOF Unicable
Unicable configuration mode Unicable lnb
Manufacture Inverto
Type IDLB-QUDL42-UNI2L-1PP
CHANNEL scr 4
Freq 2040
connected no >>>>>>>>>>>>>>>>>>>>>>>>>>>>>> I can not select to YES (This is the problem I have here)
######################################
I I leave all tuners unconfigured as some of you may be advice then It do not work very good with recording 3 channels while watching 4th as I have tested already.You have to link them as I have linked them in VTi image to make it run properly.
Can some please help ?
I am using Open Vix 20151202 I have treid latest one but same issue.
Here are the pictures of VTi image tuner set up which allow all these options
Diseq mode none