PDA

View Full Version : [VU+ Solo] Locking up after restart



jamesperkins
06-02-16, 23:08
Box = Vu+ Solo
Image installed,
RATS bouquet / picon addons installed.
Blue-HD skin installed.
EPG setup and downloading OK & displaying OK.
4GB USB for picons/epg


Box is connected via Ethernet cable.

If I perform a restart, the box reboots and then shortly after the TV picture/sound comes on the "wait" symbol (top left) appears and remains. Cannot access any menus.

If I restart, without the Ethernet cable, all is OK.
If I then connect the Ethernet cable and "restart network" all is fine.
As soon as I do a restart with the Ethernet cable connected, the box freezes.

I have set the IP address as reserved on my router and the box is allocated the correct IP address.

Have tried reimaging the box several times.
I have also updated the bootloader.

Willmoore
06-02-16, 23:15
Have you installed an mg-cfg file ?

jamesperkins
06-02-16, 23:24
I haven't, the box was owned by somebody before me.
What is an mg-cfg file?

Willmoore
06-02-16, 23:30
You will need an FTP program such as Filezilla.
Connect to your box and look in /usr/keys for a file called mg-cfg
Look at line L it should read {00} if not change it to this.

jamesperkins
06-02-16, 23:35
Connected via Filezilla, looked in /usr/keys, no files in that folder.

Willmoore
06-02-16, 23:47
Sorry I'm at a loss then - whenever there has been a problem such as yours, it has been a mg-cfg file that has caused the problem. I'm sure someone else will be along to help.

abu baniaz
07-02-16, 01:10
Can you tray and add and then activate a swap file?