ABM ipk for Wetek Play

[TK4|2|1]

Is there an ipk download for the latest version?
I'm trying openPli on my wetek, but it's not available in their feeds.


If I don't answer or comment, it's because I simply don't care!

[abu baniaz]

Try this attachment

[twol]

Quicker to run on your other receiver (assuming you have one) and use for instance echannelizer to copy over to the wetek.
The openpli image will download settings for 19.2 & 28.2E if you let it.
If you really need it, then pm me with an email id and I will give you a dropbox link.

[TK4|2|1]

Quicker to run on your other receiver (assuming you have one) and use for instance echannelizer to copy over to the wetek.
The openpli image will download settings for 19.2 & 28.2E if you let it.
If you really need it, then pm me with an email id and I will give you a dropbox link.

I'm using dvb-T tuner.


If I don't answer or comment, it's because I simply don't care!

[TK4|2|1]

Try this attachment

Thanks Abu.


If I don't answer or comment, it's because I simply don't care!

[TK4|2|1]

Try this attachment

Doesn't work.


If I don't answer or comment, it's because I simply don't care!

[abu baniaz]

Probably wrong architecture. I'll try and pull it off teh pbnigma image



opkg download enigma2-plugin-systemplugins-autobouquetsmaker


you will find it in /home/root

[TK4|2|1]

Quicker to run on your other receiver (assuming you have one) and use for instance echannelizer to copy over to the wetek.
The openpli image will download settings for 19.2 & 28.2E if you let it.
If you really need it, then pm me with an email id and I will give you a dropbox link.

I'd rather have a link to your Vix wetek image. Winkwink.

[bbbuk]

Taken from another forum...

[TK4|2|1]

Taken from another forum...

That's the same build Abu posted earlier. Does this 1 work on wetek Pli image?

[bbbuk]

It works on PLi but not sure about wetek pli.

It has 'All' at end so that means its been built/changed for all architectures rather than a specific one, not sure about wetek though as I said.

If you try to install it via telnet, then it should give you some error messages which we can use to hopefully narrow down why

[abu baniaz]

That's the same build Abu posted earlier. Does this 1 work on wetek Pli image?

I got it from same place. Debug log will show issue. Pretty sure it will say that the reader file has not been found. This is becuase of the CPU architecture.

[TK4|2|1]

I need to get hold of one openATV use on wetek. That works.

[TK4|2|1]

It says,
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/scanner/dvbreader.so: cannot open shared object file: No such file or directory.

[bbbuk]

I got it from same place. Debug log will show issue. Pretty sure it will say that the reader file has not been found. This is becuase of the CPU architecture.What CPU do Wetek use? Obviously not Broadcom.

[bbbuk]

It says,
/usr/lib/enigma2/python/Plugins/SystemPlugins/AutoBouquetsMaker/scanner/dvbreader.so: cannot open shared object file: No such file or directory.That's error Abu mentioned. It's due to CPU.

If you can flash ATV and use command that Abu mentioned in post 7 then that should do it.

[abu baniaz]

It uses ARM CPU. If someone gets one from a solo4k, that should work too.

[TK4|2|1]

That's error Abu mentioned. It's due to CPU.

If you can flash ATV and use command that Abu mentioned in post 7 then that should do it.

I could do with another micro SD card, that way I could simply switch between the 2.


It uses ARM CPU. If someone gets one from a solo4k, that should work too.

Let's hope someone reading with one comes to the rescue.

I might go back to ATV for the time being. CrossEpg don't work either.

[abu baniaz]

CrossEpg don't work either.

I thought you were using it for terrestrial?

[TK4|2|1]

I thought you were using it for terrestrial?

You are right, I am. I use Cross to populate the epg of remote channel stream converter channels from my technomate. I've never been able to share the epg.dat between the boxes over my network, believe me I've tried, so I use rytec on the wetek.

[abu baniaz]

Try this attachment, it is for arm cpu only.

Is this thread relevant to you?
http://www.world-of-satellite.com/showthread.php?42301-ABM-Terrestrial-HD-%28UK%29-User-input-required


EDIT: 1813

Modified ipk uploaded.

[twol]

46660

Well if ABU's ipk doesn't work try this its from my wetek build feeds.

[TK4|2|1]

Try this attachment, it is for arm cpu only.

Is this thread relevant to you?
http://www.world-of-satellite.com/showthread.php?42301-ABM-Terrestrial-HD-%28UK%29-User-input-required


EDIT: 1813

Modified ipk uploaded.

I've already contributed to that thread.



46660

Well if ABU's ipk doesn't work try this its from my wetek build feeds.

Thanks guys, I will try these files later and report back.

[TK4|2|1]

Worked [emoji106][emoji106]

[twol]

Great - OpenPli image, basics work e.g. can play channels, but nothing much else.... more like proof of concept :)