vu solo 4k tuner set help needed

[sunlight786]

VU+ Solo 4K
2 x permanents satellite tuners and 1x T/T/C Dual twin tuner for cable

I have flashed with OpenAtv latest
I have connect 2 wire for tuners
I have stranded 1 meter dish with 4 out put Lnb
I only need 28.2e set up.

I am look to record more then 4 channels at a time with out any restriction while watching another freely.
I also want to download Crossepg(opentv) every day with any tunner faild message/error
Manufactured told me that this box is easy capable to this due to the latest technology tuners

tuner c , d , e , f ,g , h showing not configured

when I leave them alone then I can record more then 2 separate channels.

if I make then as
Advance
28.2e
Lnb not configured or Lnb 1

It all messed up now.

can some one please guide me step by step
I am sure some one here definitely got this box with right setup.

I d,nt think It work only with Unicable Lnb as I have slandered 4 out put Lnb

################################################## #

[Arcy]

VU+ Solo 4K

can some one please guide me step by step
I am sure some one here definitely got this box with right setup.

I d,nt think It work only with Unicable Lnb as I have slandered 4 out put Lnb

################################################## #

It can't be done with a quad LNB. To make full use of your Solo4K, you could use a quattro LNB (which is a different thing) plus a suitable stacking device. But it would be simpler and cheaper to replace your LNB with a single-cable LNB conforming to the EN 50494 standard, such as the new Unicable II LNBs from Inverto. These feed a single cable which you would plug into the LNB1 IN socket of your Solo4K receiver. You could then configure tuners A to H to match eight of the frequency channels delivered by the LNB. These settings must be configured manually.

I suggest you have a look at the Wikipedia article on single cable distribution and the product information on the Inverto site.

[2stein]

well, if you hook up 2 outputs of the quad lnb to tuner a and b, then the remaining 6 tuners are configured automatically on demand afaik.
however, you can only record/watch up to 8 channels of max 2 sat sub-bands (VH, VL, HH, HL).
unrestricted access is only possible with unicable lnb or switch.

[Arcy]

well, if you hook up 2 outputs of the quad lnb to tuner a and b, then the remaining 6 tuners are configured automatically on demand afaik.
however, you can only record/watch up to 8 channels of max 2 sat sub-bands (VH, VL, HH, HL).

I think perhaps you meant transponders there, rather than channels: it's possible to record/watch multiple channels within the same transponder simultaneously. And since all the main FTA TV and radio channels on 28.2E are on either VL or HL, what you suggest may be all that sunlight786 needs.

[DaMacFunkin]

You need unicable Lynn with at least 2 unicable outputs for what you want to do, you could record 3 channels and watch another without restriction by adding your cable tuner into the mix.

[sunlight786]

it does not matter what I do mate. I even bought EMP-SCR Multi switch which can take Qyattro lnb in and provide 1 x 8 satellite signal
This switch also do not work.

Now I nned to try a suitable unicable LNB Lnb which can give me 8 to 32 satellite signal via single cable.

Any one know about any LNB make and model so I can try out?

[sunlight786]

it does not matter what I do mate. I even bought EMP-SCR Multi switch which can take Qyattro lnb in and provide 1 x 8 satellite signal
This switch also do not work.

Now I nned to try a suitable unicable LNB Lnb which can give me 8 to 32 satellite signal via single cable.

Any one know about any LNB make and model so I can try out?

[Arcy]

it does not matter what I do mate. I even bought EMP-SCR Multi switch which can take Qyattro lnb in and provide 1 x 8 satellite signal
This switch also do not work.


It would help if you mentioned the model number of the switch you have bought. Perhaps it's working but you're not using it correctly.

[2stein]

I think perhaps you meant transponders there, rather than channels: it's possible to record/watch multiple channels within the same transponder simultaneously. And since all the main FTA TV and radio channels on 28.2E are on either VL or HL, what you suggest may be all that sunlight786 needs.
yes, you're right... i meant transponders. with 2 quad-lnb feeds you can watch up to 8 transponders on 2 sub-bands which could be even more than 8 channels.
so, maybe it's just a tuner configuration problem.