PDA

View Full Version : [VU+ Solo2] openvix flash


Gaffer1984
07-01-16, 17:30
Hi i wounder if any one could help me ive got a vu solo 2 it was on open pli ive tried flashing with open vix like i got on another box but after the box flashes it load's the opening screen and then goes black and it says vu solo on the front of the box any help would be much appreciated as im not the brightest button in the box
2stein
07-01-16, 18:34
maybe you flashed the wrong image file?
bellejt
07-01-16, 18:39
or a clone box
Gaffer1984
07-01-16, 18:47
or a clone box

I'm positive it an Offical one not a clone
Gaffer1984
07-01-16, 18:48
I've tried a few of the Openvix images and it does all the right things in flashing but won't load after start up screen
bellejt
07-01-16, 18:55
right image : http://www.openvix.co.uk/index.php/downloads/vu-plus-images/vu-solo-2/
Gaffer1984
07-01-16, 19:00
right image : http://www.openvix.co.uk/index.php/downloads/vu-plus-images/vu-solo-2/

Do I just use the newest one
bellejt
07-01-16, 19:10
normaly yes because recent links are in there.When flashed and automatic rebooting it may take a while to continue booting.So just wait a few minutes before to panic.
Gaffer1984
07-01-16, 19:16
normaly yes because recent links are in there.When flashed and automatic rebooting it may take a while to continue booting.So just wait a few minutes before to panic.

Brill I'll give it ago when I get back from work I did try some of them yesterday but not the new one.
Gaffer1984
07-01-16, 19:53
Brill I'll give it ago when I get back from work I did try some of them yesterday but not the new one.

I gave it ago and still same does all flashing and re booting shows start up logo then black screen so I haven't a clue what could be up
bellejt
07-01-16, 20:01
does your tv has the right resolution settings supported by the image? After start vix will try several resolutions. This is the only problem I can see at the moment.Bootloader should be the right one because there is no new one.
diceman01
14-01-16, 03:41
To make sure 100% you haven't been sold a clone by mistake try the following. Boot the box without internet connection and a Sat feed, if it boots you have a clone.
Andy_Hazza
14-01-16, 08:05
On the rear of the receiver do you have any stickers that say either v1.0, v2.0 or v3.0?


Sent from my iPhone using Tapatalk