View Full Version : Twin tuner problems
Hi guys,
This problem happens on both my et10k and tm twin.
When I try to watch tv it shows that both tuners A and B are active.
I know that there is no recordings going on and both tuners individually work when the other is disabled.
Please if you can help let me know!
Thanks
How are your tuners setup on the boxes and I assume that you've got separate feeds from your LNB to the tuners on the box?
both setup as automatic - finding 28.2
and yes, each with individual feed from quad lnb
It's strange that you get the problem on 2 separate boxes isn't it? Seems to suggest to me that the problem is beyond the boxes so I'd check all the cabling and connections back to the LNB as the first thing.
i have setup my twin tuners listed as 28.2,simple and single,if using cams you are using either 1.38 or 2.30 for multi tuner boxes?
I use mgcamd 1.35 and or 1.38
Sent from my Nexus 7 using Tapatalk
check to make sure you have no ports forwarded to you box, I had a similar issue on my et8000 and it seemed my open ports were hacked, closed the ports and it was fine. worth a try??
Hi, I had this problem, It drove me mad. Just solved it.(Time will tell) go to set up menu and do a software update. I guess that the manufacturers were aware of it. I hope it works for you
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.