View Full Version : Help on cccam and oscam pls.
Pls can l use cccam and oscam together as clinet,currently am using cccam 2.3 on openvix 3.2 and Tm nanose. how can l go about it.:rolleyes:
Just use OScam on its own.
Two at same time stresses the box, and is unnecessary.
Plz how can l set up oscam as client on my receiver.
Just use OScam on its own.
Two at same time stresses the box, and is unnecessary.
Yes using both oscam and CCcam together may be unnecessary but it certainly does not stress any of the boxes I have them running on.
Sorry, no one here can help you to set up OScam as a client wthout breaking forum rules.
You will have to try another forum.
Am not getting how to ftp ---- to oscam.:rolleyes:
Yes, l have tried it, but not working. What l released after l converted d file to oscam.server, when l ftp it to etc/tuxbox/config it shown oscam.server.bak.
DaMacFunkin
10-11-15, 09:52
That is probably because the cam is running, find softcam manager under blue button and stop oscam, now ftp files and then restart cam (also set to auto start).
I have tried it, still not working. It seems something is not work.
Could the file be corrupt after you converted it ??
instead of FTP you can edit the file with copy and paste also.Just open the file on your box and paste the config in it.Then save.I do that all the time to see specific channels for educational purposes.
Where do l need to paste it in config? Is it oscam.server,oscam.conf, oscam.user or create or create new one there. Thanks
you can edit in all fields you want.File depends on what you need to change.I just change the server file with extra READER.Do not forget to restart oscam by webif (ipadress box:port oscam . In my case standard 8081).Use right mouse button when standing on file side off the box in FTP program.I use DCC.
But l just want to use it as client. Bcuz u mention reader and webif but l dont know how to configure them more so l dont have card on my box l mean smart card and smart cam.
then story ends because CS may not be discussed on forum
DaMacFunkin
10-11-15, 18:49
Right before you hang yourself in a street with no trees, why don't you remove anything that can identify you and your system from the files in tuxbox/config and then zip them up and post them, maybe some kind sole will have a look and give you some pointers.
Remember no illegal stuff, we won't help with that.
these are what in my tuxbox/config 45668
hello l have attached my tuxbox/config file.:thumbsup:
first thing I see is teh extention .txt. If the files are in the box like that it will never work.Extention txt is wrong.
l attached another:thumbsup::thumbsup:
Pls l have attached another one.:thumbsup:
Add a [dvbapi] section to the .conf file.
Do this using the webif, and go to each config file in turn and save it using the webif command -- that corrects small errors.
pls how can l add it bcuz l ftp it but not transfer.
l dont know how to use webif,how can l use it with command.
hello any clue or help...........pls dont ignore.:confused::confused:
abu baniaz
11-11-15, 18:19
You enter the Ip address of your receiver combined with ":" and the defined port number for oscam into your browser. The port number is specified in your oscam.conf
If your IP receiver's IP address is 192.168.0.6, you would enter the following into your web browser (Internet Explorer, Firefox etc)
192.168.0.6:8888
l dont know what to addd to [dvbapi] section to the .conf file. Pls help me.
maybe it is easyer to do it another way if you can FTP to the box.Go into box by FTP and copy the files in oscam to your PC .Then remove the files on the box and ftp new files to box.Should work.
PS : for finding the right port to open Webif from oscam go into config file on your box and see witch port is used.Use the RIGHT mouse button to go into file
Am really grateful guys, l managed to do it but the problem is, is freezing every 8sec at time freezed to the extent that l had to change the channel. Plz what can l do.
One more think l cant access webif by out network.
Oscam 1.1/enigma2/openvix3.2 freezing every 8sec, freezing to the extent that l had to change the channel. Plz what can l do. One more thing,l cant access webif by outer network.:confused:
DaMacFunkin
16-11-15, 13:52
You shouldn't be starting a new thread really should you, you already have a thread with these issues in.
Well,no respond that is why.
DaMacFunkin
16-11-15, 13:58
Hello you have been told that oscam webif is your boxes IP address followed by a port, this port is in your config file, my port is set to 8888 so I would type into an explorer address bar :
192.168.1.181:8888
This would then ask me for my username and password which I had previously set in the config file.
If you havnt set the config file up yourself your port might not be 8888, you need to find this information from the config file, without you accessing oscam webif we can't help with your time outs.
If you using an official card and getting freezing them you need the change the settings in oscam, if you not using an official card then really this forum is not the correct place to discuss you problems. If its not an official card check you internet connection, change cams and try cccam and see if it persists.
ls not the issue,l accessed it before and wanted to access it again but saying This webpage is not available.
OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines
[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10
abu baniaz
16-11-15, 17:29
Are you still pursuing this? I have alos merged your three threads about more or less the same issue?
http://www.world-of-satellite.com/showthread.php?48941-Oscam-cccam-help
DaMacFunkin
16-11-15, 20:27
Well,no respond that is why.
Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.
.
Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.
.... If you are driving 44 tonne trucks.... I had better set myself a note to never upset you:) .... Mind you when you live in a country where normally a truck has a trailer at least as big as the vehicle in front you get used to avoidance techniques :)
Are you still pursuing this? I have alos merged your three threads about more or less the same issue?
http://www.world-of-satellite.com/showthread.php?48941-Oscam-cccam-help
No:thumbsup:
Dude honestly.... I had to take a 44 tonne truck out today coz a driver didn't turn in, Most people are not on the end of a device all day long just to provide support, I spent most of Saturday trying to sort my own s**t out, when I am available if I can answer a question I will, but that is certainly never whilst driving an HGV through busy streets and villages.
As it is when you get into oscam webif you need to change the timeout in global config, if you are accessing your local cable card set it to 8000ms, i personally have mine set to 10000ms.
If it is sat you will need much lower values but that all depends on what card you have.
At the moment l cant access webif,l think my setting is wrong somewhere.
At the moment l cant access webif,l think my setting is wrong somewhere.
If you can't access oscam webif, it's either nor running - check blue button -> Softcam Manager, or you're using the wrong port - check /etc/tuxbox/config/oscam.conf - httpport for correct port to use.
OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines
[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10
Not working but saying......... This webpage is not available.
abu baniaz
17-11-15, 00:09
what address are you inputting into your web browser?
OK make sure there is a [webif] section in oscam.conf. If there isn't then add these lines
[webif]
httpport = 8888
httprefresh = 5
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
httpforcesslv3 = 1
httppollrefresh = 10
This my webif settings
[webif]
httpport = 8888
httpuser =
httppwd =
httprefresh = 10
httpallowed = 127.0.0.1,10.0.0.0-10.255.255.255,172.16.0.0-172.31.255.255,192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 15
Not working but saying......... This webpage is not available.
Network issue so. What IP are you trying to connect from?
DaMacFunkin
17-11-15, 10:09
I think you need to simplify that webif, do you connect directly to your modem or do you have a seperate router?
Network issue so. What IP are you trying to connect from?
Box IP,i see on network information.
I think you need to simplify that webif, do you connect directly to your modem or do you have a seperate router?
I connect directly to my router.
Not working but saying......... This webpage is not available.
This can also mean that your oscam is not running in the box.
Is running but freezing and stand still.
Can l paste my webif setting?.
Is running but freezing and stand still.
What kind of setting do you have in Oscam Info? Blue button -> OScam Info -> Setup
45737My setup:
Reader user data from oscam.conf..........yes
Automatically update client/server view......yes
update interval (in seconds)......................5
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.