Trouble changing sats

[zappahey]

I have 4 quad LNBs with a pair of 4-1 Disecq switches. Over the last few weeks, it's become difficult to change sats. Signal strength goes to zero but if I go into setup, disable or enable one tuner and force a retune then it works.

I'm running VIX 1.3. What do you reckon, dodgy switches with the cold weather or something else?

Cheers,
J

[silverfox0786]

i think it may be the weather stick it out and see if it gets better when the weather changes then make a decision

[westentertainer]

i think it may be the weather stick it out and see if it gets better when the weather changes then make a decision
yes if you can wait until June LOL

[whyder]

I am also facing same problum, I have quad dish with 4-1 diseqc switch, I also replaced diseqc with new diseqc switch but still same problum as "zappahey" mentioned. The weather of dubai is fine. I think there is some setting issue. Anyone can help.

Regards
WH

[Hakon]

Yes there can be a solution on this problem, but not for 100% .
On some combo it helps and some it dosn't.
Try this :
In Tuner setup choose "Advance" and set DiSEqC repeat to 3 , see exampel in sreenshot