technomate nano se help

[trashuk]

Hi all
have a technomate 2200 motor and 90cm dish
so brought a open box and thought it was abit plop so splashed out on a technomate nano se
i took the dish down gave it a clean yesterday and stuck it all back up with a new pole.
entered the setup on the technomate nano and then flashed to the newest vix image.
i then went about turning the motor to 0 to set south then was going to turn to thor 1w to align the dish this is when i realized the dish wasn't moving.
tried to move it manually on the dish with the buttons no power light.
just to be sure put the open box back on and the power light came on and able to move dish.
so am just wondering if there is a setting im missing for the dish at the moment
got it set on
simple
positioner
with long and lat in.
seems like i got no power out to lnb
Gary

[trashuk]

right have got the dish to move. and can align to 28.2 but cant find 0.8 to try and do the arc.

[abu baniaz]

I find it easier to load a motorised channel list before aligning a dish. You can then select a channel from various satellites and adjust.

What was wrong with the dish movement?