View Full Version : [ABM-MISC] NLine Support & AMB Setup
Hello,
[*** Moderated ***]
Also i have setup the ABM config as Expert and then check on providers but it only shows FreeSat HD and i have currently Sky TV UK, I can only assume that i have edited the frequency for it to only show FreeSat but i have all the sky channels as normal
Any idea's?
Thanks in advance
[Mod] 4a. NO CARD SHARING TALK WILL BE TOLERATED, LAN OR WAN!
Please follow the instructions in the sticky (http://www.world-of-satellite.com/showthread.php?44783-ABM-support-questions) so we can help you with your query.
Apologies re moderated section was asking if supported didn't realise that was a no no
Regards
Juggy
Hi please see log files below
You will notice getting error re tuner lock that wasnt an issue prior to Logs being enabled
abu baniaz
22-08-15, 23:30
What receive do you have?
What is the total number of tuners you have? (If you have a twin tuner module and also a single tuner module, you have three tuners)
What is connected to each tuner? Also state what each tuner is configured as (please answer separately for each tuner)
Using Vu+ Duo2
twin tuner
Sky TV
abu baniaz
22-08-15, 23:37
Using Vu+ Duo2
twin tuner
Sky TV
Your answer does not help. Cross EPG downloader also failed so there is something wrong with your configuration/setup.
Do both tuners have wires connected to them?
What have you set each tuner as? I would expect simple, single, 28.2
Failing on tuner B.
Have you got a cable connected to tuner B?
What is your tuner config for tuner B?
Ok so this is new to me so sorry for vague answers
I have a twin tuner that has 2 cables connected for sky TV
The config is simple and using astra 28
Vu+ Duo2 Full HD 1080p Dual DVB-S2 Twin Tuner Linux PVR Ready
Can you post a screengrab of tuner config of tuner B.
Screengrab instructions in Abu's signature.
abu baniaz
22-08-15, 23:55
Thanks.
Can you post the one in: Menu >Setup > Service Searching > Tuner confguration
abu baniaz
23-08-15, 00:02
For some reason, you are not getting a lock on the signal. We have to confirm this and then track the issue.
Can you set tuner B as "not configured" then run ABM please.
Ok disabled and rebooted still will only find the freesat HD option yet can still see all sky channels
abu baniaz
23-08-15, 00:11
One thing at a time. Does ABM work?
What you mean by does ABM work?
I open ABM go to config set as Expert press ok option
go to providers then on LCD screen on box gives me option to change left or right for FreeSat HD yes or no, no other options
abu baniaz
23-08-15, 00:20
You had previously run ABM for Freesat HD, It timed out with tuner lock issue. Does it still do the same?
As a separte question:
You said you edited files, which files did you edit.
now works fine no tuner lock still only free sat
I edited the frequency on the tuner so not sure what the actual sky sat should be
abu baniaz
23-08-15, 00:34
Now, swap both cables round and repeat the test. Do not change the tuner configuration.
We will deal with Sky missing as a provider later. Still don't understand what you mean by your response, but we can deal with that later.
now works fine no tuner lock still only free sat
I edited the frequency on the tuner so not sure what the actual sky sat should beNot really sure what you are talking about.
Do a screen grab of your ABM providers screen.
thats worked fine for ABM
still just freesat
will upload a screen shot of the frequency i chnaged and if it makes any difference
changing transponder sorry
Yes please.
Look like the other feed is faulty.
abu baniaz
23-08-15, 01:06
Look forward to your picture, as we are bit confused as to what you changed.
Another task for you. Enable tuner B.
Menu > Setup > Service searching > Sat Finder
Chack that both tuners can lock onto this frequncy. Make sure details are the same as in the attached picture.
Changing that won't do anything to ABM.
Please post a grab of your ABM providers screen.
abu baniaz
23-08-15, 01:08
Look like the other feed is faulty.
Might be tuner as he has swapped cables over and still fine (unless F-plug was loose earlier).
both locked fine did scan only fond 9 channels though so doing a rescan on the main setup
The ABM providers dont actually show on the screen not sure if button needs pressed to show but shows on the Du2 LCD screen
abu baniaz
23-08-15, 01:24
You have gone into the providers menu? Whatever it shows, post the screenshot.
I suggest you use the default skin for now.
The skin you are using is very nice but still a work in progress
okies screen shot attached and works unlike the other skin
Well give Sky a go then...
okies looks to be good thank u very much
both locked fine did scan only fond 9 channels thoughSatfinder is only a test tool. Reason only 9 channels were found is because it only does a search on the current transponder.
ok thanks anythig else i need to do?
ok thanks anythig else i need to do?Watch some TV. :D
thanks for all the help sorry about the main post
juggy
DaMacFunkin
23-08-15, 06:38
44334
Help, ABM won't scan any Sky channels :confused:
...Piss Funny.
44334
Help, ABM won't scan any Sky channels :confused:
...Piss Funny.Is that the smallest screen grab you could manage? :D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.