View Full Version : Can I program the VU+ Duo 2 remote to turn off my TV?
Can I program the VU+ Duo 2 remote to turn off my TV? I'm looking for the instructions please.
Andy_Hazza
21-08-15, 13:20
Can I program the VU+ Duo 2 remote to turn off my TV? I'm looking for the instructions please.
Yep you can. What TV you have?
Can I program the VU+ Duo 2 remote to turn off my TV? I'm looking for the instructions please.
Menu >HDMI CEC Setup put tv in standby select YES > Wakeup TV from standby select YES.
LG : LG 40UF770V40
Ive tried the HDMI CEC setup but could never get it to work.
Thanks
Can you post your HDMI CEC settings from your box ?
Andy_Hazza
21-08-15, 14:51
LG : LG 40UF770V40
Ive tried the HDMI CEC setup but could never get it to work.
Thanks
First things first, make sure the Volume on the Vu+ remote is set to 100% beforehand. Press 1 & 3 simultaneously on your Vu+ remote until the TV button illuminates. Then enter the TV code, in your case it is 1628 (LG TV Code). Then hold down the mute button on the Vu+ remote whilst pointing at the TV until the TV mutes. When it mutes, now press the +/- volume buttons and the volume should work. Once done exit out the mode by pressing the ok & stop button (recording stop button). You now have a paired TV remote.
Sent from my iPhone using Tapatalk
Andy_Hazza
21-08-15, 14:59
Your HDMI-CEC settings should be;
Enabled - YES
Put TV in standby - NO
Wakeup TV from standby - YES
Regard deep standby as standby - NO
Switch TV to correct input - YES
Use TV remote control - YES
Handle standby from TV - YES
Handle wakeup from TV - YES
Wakeup signal from TV - STREAM REQUEST
Forward volume keys - NO
Put your Vu+ into standby - YES
Wakeup your Vu+ from standby -YES
Minimum send interval - DISABLED
Then green button to save settings. Now you will have a proper working remote where you press the STB this turns your Vu+ receiver off and pressing the TV turns your TV off. And to turn your TV on just press TV on the remote etc.
Sent from my iPhone using Tapatalk
Thanks Andy.
Had to go back to work. Will try when I return.
First things first, make sure the Volume on the Vu+ remote is set to 100% beforehand. Press 1 & 3 simultaneously on your Vu+ remote until the TV button illuminates. Then enter the TV code, in your case it is 1628 (LG TV Code). Then hold down the mute button on the Vu+ remote whilst pointing at the TV until the TV mutes. When it mutes, now press the +/- volume buttons and the volume should work. Once done exit out the mode by pressing the ok & stop button (recording stop button). You now have a paired TV remote.
Sent from my iPhone using Tapatalk
Hi Andy, Is this same instructions for a Samsung smart TV.
Sent from my iPad using Tapatalk
Andy_Hazza
21-08-15, 18:34
Hi Andy, Is this same instructions for a Samsung smart TV.
Sent from my iPad using Tapatalk
Aup buddy, same instructions but your TV code is 2448.
Sent from my iPhone using Tapatalk
Nice, thanks for the quick reply.
Sent from my iPad using Tapatalk
Ok. Great instructions from Andy. VU remote now turns tv off with tv button.
HDMI CEC still no joy with these settings. Tried different cables as well.
Andy_Hazza
21-08-15, 19:05
Did you try restarting your receiver?
Sent from my iPhone using Tapatalk
Hi Andy, do you have the code for panacronic TV please?
[QUOTE=Andy_Hazza;370485]Did you try restarting your receiver?
Still no joy. I've read that other people have the same issue.
Never mind. I've got the Tv button working now so thanks.
Still no joy. I've read that other people have the same issue.
Never mind. I've got the Tv button working now so thanks.If i set Put TV in standby to yes then when putting my box to standby it also turns my TV off. (old sony TV)
I realise this has already been suggested but it works for me :)
Hi Andy, do you have the code for panacronic TV please?
panacronic???
If you mean Panasonic the code i used for mine was 2153:thumbsup:
panacronic???
If you mean Panasonic the code i used for mine was 2153:thumbsup:
Thank you wallnut.
PS its what my old man used to call Panasonic stuff. :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.