View Full Version : Record one channel and watch another
Hi please can someone help?
I am using hades build 012
I have 2 dvb-c and 1 dvb-s
When I try to record on tuner A(dvb-c)
I get nothing on tuner b (dvb-c) and I don't know hot to change it to tuner c (dvb-s) either can someone help im sure it is a straight forward problem ( I just don't know the answer) :)
thanks
abu baniaz
11-06-15, 19:34
What is connected to each tuner?
What is each tuner configured as?
Answer separately for each tuner please. It is for you benefit.
43223
Tuner A connected from split cable
Tuner B connected from Split cable
Tuner C connected from Sat cable
Tuner A is configured the same as Tuner B
Tuner C Mode single satellite 28.2E Eutelsat& Astra 2E/2F
abu baniaz
11-06-15, 20:13
Try swapping the cables round and see if there is any change on Tuner A/B issue. Might be an idea to set tuners as nothing connected one at a time.
Note:
You don't select tuner to select a channel. You select a channel and receiver uses the configured tuner for it based on what is avilable/any user preferance. Channels are called "services"
To answer your question of how to make receiver use tuner C, you have to select a satellite service/channel.
I swapped the cable no difference, I then set tuner b to nothing connected set a recording going and then tried to turn over to bbc hd it said no free tuners but also when I look at the epg the channels are all grey as if I cant watch them
not sure what to do next how do I know what is a satellite service channel by looking at the epg?
abu baniaz
11-06-15, 20:37
Option 1.
Open your chanenl list, press menu. There is an option to show service type icon.
Option 2
When you open your list of services, press green for satellites, you can then select cable, or 28.2 (or any satellite other satellite installed)
Option 3
If you are using ABM to obtain chanenl data
Add the provider name. You will then know if you have a satellite bouquet or cable bouquet.
Hi thanks for those options am I right to think as long there is info in my cam and both green that all should work I think maybe I need to start again , if I reset my box will it go back to how I first received it or will I need to reflash it?
I have already learned a lot and I think my abm setup isn't as it should be
abu baniaz
11-06-15, 21:09
Flashing is best way to remove everything
Just to let you know, for a while i fusing CCcam, you need to be on version 2.3 to use two services.
Thanks Abu Baniaz you are a star it was that I can now record one channel and watch another /record it also cheers
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.