Harmony Touch DVR Button

[dfox]

Just received and set up my harmony touch but there is one button I cannot get working. I cannot get the remote to recognize or enter the recordings list on the HDD. Even when I try and teach the remote the command it says it has recognized it and saved it but it will only work when I go into the below on the remote:

Menu - Devices - GI LX3 - DVR or Media.

Anyone got this working?

[Trial]

Hi,
for my Solo2/Duo2/Ultimo there is a command "List" for record list. I put this command on DVR et voila. Check the commands of your LX3 in device mode of the touch and when you find a command that opens you movies assign it to DVR.

If everything fails you can always learn the needed command from your original remote and put this on DVR.

ciao

[dfox]

ciao[/QUOTE]

When in device mode I see the commands and 'DVR' and 'Media' open the recordings list but when I exit out of device mode and use the actual button and not the touch screen DVR doesn't work anymore, only works when in device mode. How do I put the command on the DVR button from device mode list as I have tried altering what the button does in my harmony software but that doesn't work? I will give it another go tonight.

If everything fails you can always learn the needed command from your original remote and put this on DVR.

I have also done this and it correctly recognises the command from the original remote so I assign it to the DVR button and sync, when I try the button it does nothing, but does when I am in device mode?

[Trial]

Hi,
on the left side of myharmony you see "button", go there. Now you see on the bottom right side a drop down bow with device or activity, choose your activity there. Now you see a picture of your remote on the left side, scroll down so that you can see DVR and click it with the mouse. Now select your LX3 on the top right side and select the needed command below the device list. Press OK and sync.

ciao

[dfox]

Hi,
on the left side of myharmony you see "button", go there. Now you see on the bottom right side a drop down bow with device or activity, choose your activity there. Now you see a picture of your remote on the left side, scroll down so that you can see DVR and click it with the mouse. Now select your LX3 on the top right side and select the needed command below the device list. Press OK and sync.

ciao

Worked a treat. Spot on. Thanks alot:thumbsup:

[Trial]

Hi Nufc12,
I know that you are using OpenViX because I am reading here to:-)

Big Ralf is watching you:-)

[dfox]

:thumbsup: haha I assumed so