Mutant 2400 Cables

[Embazzy]

Hi everyone attached is a pic of the back of my mutant box ordered with 2 dvb -c and 1 dvdb-s I have numbered each connection for ease of discussion.
Am i right in thinking that one of my existing sat connections goes into number 5 ?
then I need a cable connection into connection 1 and one into connection 3 or I can link 1 connection into number 1 then a loop from 2 to 3 ?
If this all correct where do I buy a cable that goes from cable to aerial input or can I just make one?
am a bit confused.
I have a connection to my existing cable box and one to my modem I can split this further with a splitter I have purchased already but it has fconnectors I believe they are called.
Any help would be greatly appreciated 43126

thanks


Embazzy

[abu baniaz]

The cable/wire from the LNB on your dish is connected to the "LNB IN" (5) connection on your satellite tuner.

If you have one Cable cable/wire
The Cable cable/wire goes to "RF IN" on one of your C/T tuners, let's say 1. You then loop from 2 to 3.

If you have two Cable cables/wires, i.e you have used a splitter
The Cable cables/wires goes to "RF IN" on one of your C/T tuners. 1 and 3.

See this post
http://www.world-of-satellite.com/showthread.php?44799-Loop-RF-out-for-Cable-Terrestrial&p=348601&viewfull=1#post348601

[Embazzy]

that is exactly what I needed many thanks abu baniaz