insomniac
20-05-15, 12:23
Hi Hi,
I moved from Zeus to Hades.010 yesterday (+newest bootloader). I also have the TM2600 motor.
Everything mostly ok using USALS, but need help with:
1) When changing channel between satellites, I get a "Tune failed" and then the picture is displayed a few seconds later.
2) I used to get a rotating satellite image on screen to indicate motor was rotating, I dont get this in Hades.
Not a issue per se, but annoying as I never got this with Zeus image. Thinking it might be dodgy tuner config, which I attached a picture of, any guidance and tips appreciated :)
http://s17.postimg.org/w6eoiycvj/Techno_Tuner_Config.jpg
I moved from Zeus to Hades.010 yesterday (+newest bootloader). I also have the TM2600 motor.
Everything mostly ok using USALS, but need help with:
1) When changing channel between satellites, I get a "Tune failed" and then the picture is displayed a few seconds later.
2) I used to get a rotating satellite image on screen to indicate motor was rotating, I dont get this in Hades.
Not a issue per se, but annoying as I never got this with Zeus image. Thinking it might be dodgy tuner config, which I attached a picture of, any guidance and tips appreciated :)
http://s17.postimg.org/w6eoiycvj/Techno_Tuner_Config.jpg