View Full Version : [GiGaBlue QUAD] Gigablue Quad Wont Restart
aScottishBloke
06-05-15, 11:52
hi all, seem to have a problem with the new image, when i goto restart the box all i says is yoru gigablue quad is restarting and dosent do anything, i need to turn it off at the back then back on but once its back on if i goto restart the box again it restarts no problem.
not sure if this could be the problem but i put this in
http://www.world-of-satellite.com/showthread.php?27943-ViX-Night-HD-ECM-Skin-Mod
i put the one in with no progress mod
thanks
try it without that in..
try with the default skin,
upload a debug log
outrage_uk
10-05-15, 07:39
Exactly the same problem here on a GigaBlue Quad Plus running Hades 007 - fresh install.
The hang issue was there on an earlier version of Apollo but got resolved some time ago.
Same problem ?
Sent from my iPhone using Tapatalk
Debug log? Im.tired of.asking for thes.
There isn't any
Sent from my iPhone using Tapatalk
Finally one as come up and been sent
Sent from my iPhone using Tapatalk
Andy_Hazza
16-05-15, 09:57
Uploading a log file is the best option not via the box.
Sent from my iPhone using Tapatalk
I also have the same gigablue, not updated yet to hades I might give it a go today and see if I'm having same problems, I do have a random freeze and I have to reboot the box from mains or I'll wake up and all EPG and history zap is gone
42587
<214889.440269> WARNING: EPG Cache is corrupt (eventData::~eventData), you should restart Enigma!
<214889.611551> PC: 004af1d0
<214889.611653> 00000000 00000001 00000011 00d99843
<214889.611694> 7fc92040 0064b250 00000011 02670d24
Maybe related to the error I reported on my miraclebox.
http://www.world-of-satellite.com/showthread.php?45036-Memory-Leak
I haven't seen the problem again since in the EPG settings menu I turned off " Automatic refresh" and "Automatic Save".
Maybe related to the error I reported on my miraclebox.
http://www.world-of-satellite.com/showthread.php?45036-Memory-Leak
I haven't seen the problem again since in the EPG settings menu I turned off " Automatic refresh" and "Automatic Save".
I just done that mate, I'll have a check over the weekend and see if problem persists before I flash hades
Went back to 04 and reboot works !
Sent from my iPhone using Tapatalk
Had to turn updates off ! As when it updates it doesn't reboot !
Sent from my iPhone using Tapatalk
Ill give 04 a try first then back up ect before i update to latest build
Have you tried the latest Hades 008 build i would try that first and if the problem is still happening then go back, i do not have my Quad plus set up so i can not check it out at the moment
Hi
I have not had any issues with my Gigablue Quad Plus. I updated with all the Hades releases, now on 008. All apart from the first was a couch update, and all apart from the first imported settings.
I'll update tomorrow, download a clean version and set it up from scratch, what skin are you using, also is time shift ok
Just updated to hades 08 and I'm having the reboot problem GUI restart is fine but a full reboot leaves box frozen iv had to restart from switch
Hi
Just couch updated GBQ+ to version 009 with no issues. I use the default skin, and no other plug ins. Having said that, my box failed to wake up and record the Andrew Marr show today. This is an ongoing issue and this happened with pre Hades versions too (from time to time).
I have all set up from scratch again same problem, updated to 09 and its still the same, I restart screen go's black with your GBQ+ is rebooting I get a spinner for 1s then disappears and just sits in that screen until I turn it of,
Just updated to hades 08 and I'm having the reboot problem GUI restart is fine but a full reboot leaves box frozen iv had to restart from switch
I decided to set up my Quad plus again and i had the same issue and vix spinners i even tried Telnet commands to reboot, it stopped the spinner but then locked up again and had to turn it off at the back
i have updated to 009 and it seems better but i have not fully tried it out as i did not get to bed till 7am trying to fix it :sleep:
Iv not disconnected HDD and tryed it that way yet but thats not the problem its a bug in the image, iv enabled debugs but nothing there or crash logs, I'll run the image for the rest of the day and test it out, the image is running fine so far bar the box unable to complete the roboot process
Thats the first debug log
outrage_uk
17-05-15, 19:41
Gigablue Quad Plus running Hades 009 still doesnt restart with or without HDD - no logs.
Hopefully there's a fix soon
Nothing wrong with Hades 009 on my GB Quad Plus as regards restarting. Goes into deep standby when requested and comes out of deep standby with remote. I also have a Power Timer to wake it up each morning at 06.00 and then it runs ABM and CrossEPG. Maybe your bootloader is out of date? The bootloader was updated last July to cater for bigger partition sizes and new requirements for changes in the underlying OE core. You could try flashing the bootloader http://www.openvix.co.uk/index.php?dir=Bootloaders/GiGaBlue-Bootloaders/GiGaBlue-QUAD%20PLUS/ followed by a clean flash of Hades 009.
I flashed bootloader a week or two ago done a clean install of apollo 166 and was ok, ill flash bootloader again later, iv just put open atv in it and all is running fine no problems at all, i think it could be my usb
If you've already flashed the newer bootloader, there is no point in flashing it again. No point in risking bricking the box. When you say you think it could be your usb, do you mean the stick you're flashing from? In which case I definitely wouldn't be flashing bootloaders from it!
If you've already flashed the newer bootloader, there is no point in flashing it again. No point in risking bricking the box. When you say you think it could be your usb, do you mean the stick you're flashing from? In which case I definitely wouldn't be flashing bootloaders from it!
I flashed bootloader then hades 09, restarted and it booted up no problems I put mgcamed in and the files in and no rebbot I took the files and unistalled mgcamed and its not rebooting,
I am having the same problem with my Quad plus tony if i do a GUI restart it reboots ok but if i do a normal restart it just stops and will not reboot until you switch it off at the back, i have just tried rebooting it with a Telnet command and it rebooted as normal, then tried pressing restart and it is now stuck on a blank screen and the TV saying no signal so i am going to have to switch it of at the back to get it to reboot running the latest Hades 009 update
after a lot off messing about all day in fact, I now know it is mgcamed that will not allow the box to reboot, I have used mgcamed 1.35a and 1.38 both doing the same if I disable startup and stop the cam it boots if I start cam and activate cam at start up and restart it will not boot, i also tryed with just cccam and no mgcamed and it done the same thing
As this been fixed ? Still 04 until a fix is out !
Sent from my iPhone using Tapatalk
No still the same on build 10 maybe next update it will be sorted
No still the same on build 10 maybe next update it will be sorted
Unless anyone can post boot logs not a lot can be done, in all honesty sounds like a possible driver issue.
Unless anyone can post boot logs not a lot can be done, in all honesty sounds like a possible driver issue.
How do you post boot logs, its the cam being active thats causing it
I sent a log a few days back
Sent from my iPhone using Tapatalk
Iv been sending debugs, not sure if the same thing
Just turn off my mganmd still didn't reboot must be a driver issue
Sent from my iPhone using Tapatalk
We need RS232 logs from a reboot.
Stop mgcam and disable start up then it reboots
outrage_uk
20-05-15, 12:20
Yeh just to confirm ive stopped and disabled mgcamd 1.38 start up and rebooting is now working.
Ive an RS232 cable and an old computer with a serial port, how do I get logs?
Yeh just to confirm ive stopped and disabled mgcamd 1.38 start up and rebooting is now working.
Ive an RS232 cable and an old computer with a serial port, how do I get logs?
Use Putty
http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html
Setup Putty for RS232, leave it running.
1) Power on Quad+
2) Ensure MGcamd is set to autostart and reboot.
Please grab a complete log, from power on and through the reboot after enabling MGcamd to autostart.
Just upgraded from 153 to Hades 10, also on Gigablue Quad.
Getting same issue with not rebooting properly and having to turn it off.
Turned Debug on so hopefully Log attached.
Just upgraded from 153 to Hades 10, also on Gigablue Quad.
Getting same issue with not rebooting properly and having to turn it off.
Turned Debug on so hopefully Log attached.
Are you using MGcamd?
There was a driver update on 1st May https://github.com/oe-alliance/oe-alliance-core/commit/247263e963b6f592bfe981cdb23263e15e0683b5
Please can someone try Hades 004, flashed and setup fresh http://www.openvix.co.uk/index.php?dir=GiGaBlue-HD-QUAD-PLUS/
Anyone using MGcamd may need to switch to another softcam like Oscam.
Are you using MGcamd?
Yes, 1.38 but I think the restart issue was there before installing it.
Cccam causes the same problem ill flash 04 just now and set it up from scratch
Boots up no probs using hades 04, mgcam active and start up enabled, ill online update to 10 after setting up and see if it boots
outrage_uk
20-05-15, 17:26
I've attached serial logs.
The Load is while it turns on, the Restart is after ive told it to restart if you couldn't work it out :p
I've just logs myself too and reported to engineers.
I suggest you guys revert to build 004 for now.
I have been building my own PC's for 20 years and the one cable that i have never used or even purchased is a RS232 cable :eek:
just in the middle of installing 004 on the Quad +
Build 004 should be fine, it has older drivers.
Boots up no probs using hades 04, mgcam active and start up enabled, ill online update to 10 after setting up and see if it boots
NO!! You have to stay on build 004 or you will have same issue again!
It will be the best thing to just use 004 until the Driver issue is sorted as Hades will still work fine, i remember when the LX3 had Driver problems and it was sorted in about 10 builds
but saying that Gigablue took ages to sort out the temperature glitch that was down to bad drivers so do not hold your breath
I was put of buying a Quad + for 12 month because i thought that you could fry eggs on it as it got that hot but that was down to Drivers again and nothing to do with the vix image
Ok ill stay put just now then
Oscam should be fine on 010.
Gone back to 166 seems more stable for now
Sent from my iPhone using Tapatalk
Im using 166 aswel runs good, i did have aproblem when i recorded a timeshift and it locked up when another timer started and timeshift recording came to an end, iv had a couple of problems with timeshift on this image
Hades 004 should be fine.
There will be a driver update next month for the gb, according to wos customer support regarding cam problem
tiggerbiker
01-06-15, 08:13
noticed an update waiting on my boxes last night, did the updates and my quad went through the updates and rebooted itself :)
unfortunately, my quad plus box still had to be powered down manually to complete the process
Andy_Hazza
01-06-15, 08:44
You need to stick with Hades 004 until Gigablue releases a fix for it. Out of our hands unfortunately.
Sent from my iPhone using Tapatalk
Hades 04 crashes if you go to information, network can anyone else confirm this
outrage_uk
01-06-15, 20:24
Hades 04 crashes if you go to information, network can anyone else confirm this
Yes ive reverted back to Apollo 166 for now seems much more stable.
I think 04 is quite stable but untill drivers come out your best staying put
tiggerbiker
02-06-15, 08:11
ive not noticed any other problems other than having to switch off & on the box after upgrading the firmware.
are there any other issues than this?
my boxes seem to be doing everything else that i ask of them
are there any other issues than this?
My Gigablue Quad froze a couple of times over the last few nights, Seemed to be when recording 2 HD programmes while watching a third.
Fixed with power off and on.
Running Hades 004 but thinking of restoring Apollo 154 which had no issues for me.
Debug logs attached.43110
Any news on update ?
Sent from my iPhone using Tapatalk
Sorry to dig up this old thread again, but I'm just back from holidays and wondering if drivers have been updated yet?
I see we're up to Hades 16 so hopefully ok to upgrade from Apollo!
outrage_uk
23-07-15, 19:19
As of Hades 16:
http://www.openvix.co.uk/feeds/openvix/Hades/oe-git.log
And Hades 18 is out :)
I just asked the same question on a new thread as never noticed the update log! Will try the new image tonight.
Many thanks, love this forum :)
i have just auto-updated to Hades 18 from Hades 04 and every thing seems to be working fine again the problem when you restart and the receiver locks up is not happening any more so nice one and the Gigablue can be Sold now lol :D
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.