gerryp
20-04-15, 15:05
Recently bought a VU+Duo2 ( 2 x Dual DVB-S & 1 DVB-T) from a shop in Dublin, came with VIX Apollo Build 126.
Although I had no problems with channel reception, if I went to use any plugins /addons or to look at the network or any other settings, the box would crash and re-boot.
41940
The vendor removed the vix image and installed BH 2.1.5
Now this image is the opposite of the Vix, in that sometimes I don't have all channels working (none of the Saorview), but I can go in to any menu item and the box wont crash - except for one - tuner configuration (Tuner C DVB-T)
Other times some of the saorview channels are working and all satellite channels are working.
The following are the settings within Tuner Configuration, Tuner DVB-T , you'll notice there's no setting within "Terrestrial Provider" - when ok is pressed within this, the box crashes and re-boots ( I've attached the log)
Tuner C
DVB-T Selected & enabled
Config Mode: enabled
Terrestrial Provider:
Enable 5v for active antenna: Off
When some of the saorview channels work, Terrestrial Provider is set to
Europe DVB-T Frequencies
Unless the crashlog points to some particular issue been at fault then I'm thinking (as a complete novice) that the receiver is ok and that the problem is with the images??
If it's an image issue I have, what stable image have you got on your VU+DUO2 ???
Although I had no problems with channel reception, if I went to use any plugins /addons or to look at the network or any other settings, the box would crash and re-boot.
41940
The vendor removed the vix image and installed BH 2.1.5
Now this image is the opposite of the Vix, in that sometimes I don't have all channels working (none of the Saorview), but I can go in to any menu item and the box wont crash - except for one - tuner configuration (Tuner C DVB-T)
Other times some of the saorview channels are working and all satellite channels are working.
The following are the settings within Tuner Configuration, Tuner DVB-T , you'll notice there's no setting within "Terrestrial Provider" - when ok is pressed within this, the box crashes and re-boots ( I've attached the log)
Tuner C
DVB-T Selected & enabled
Config Mode: enabled
Terrestrial Provider:
Enable 5v for active antenna: Off
When some of the saorview channels work, Terrestrial Provider is set to
Europe DVB-T Frequencies
Unless the crashlog points to some particular issue been at fault then I'm thinking (as a complete novice) that the receiver is ok and that the problem is with the images??
If it's an image issue I have, what stable image have you got on your VU+DUO2 ???