rassi
07-04-15, 12:11
Anyone familiar with this, now and then LX3 will show endless spinners and when checking with ītopī thereīs Enigma2 process which take 100+% of CPU.
Only way to solve this is on/off from power switch or Reboot via terminal. This same thing have been pain in the a** for a while now :)
Top-5 from top:
top - 13:51:47 up 2 days, 20:48, 1 user, load average: 1.07, 1.07, 1.05
Tasks: 89 total, 2 running, 87 sleeping, 0 stopped, 0 zombie
Cpu(s): 50.3%us, 1.0%sy, 0.7%ni, 47.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 1155760k total, 212724k used, 943036k free, 1200k buffers
Swap: 0k total, 0k used, 0k free, 31272k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31305 root 20 0 165m 88m 9.8m R 102 7.8 778:07.83 enigma2
31427 root 20 0 2724 1148 920 R 1 0.1 0:00.13 top
171 root 20 0 0 0 0 S 0 0.0 7:19.48 nx_sched_high_s
213 root 20 0 0 0 0 S 0 0.0 7:38.85 dvb
220 root 20 0 0 0 0 S 0 0.0 0:14.85 t110s
dmesg do not give any help, from end of the dmesg:
[ioctlAudio_SelectSource] (0) stream_source (0 -> 0)
[ioctlVideo_SelectSource] (0) stream_source (0 -> 0)
[video_policy2_write] policy(scale) not found
[video_policy2_write] policy(scale) not found
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 19:31:33 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 22:31:33
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 20:01:40 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 23:01:40
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 20:31:47 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 23:31:47
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 21:01:54 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 00:01:54
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 21:32:00 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 00:32:00
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 22:02:07 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 01:02:07
From end of the debug log:
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428389757)
[EPGC] stop caching events(1428389757)
[EPGC] next update in 60 min
[EPGC] start caching events(1428393357)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428393370)
[EPGC] stop caching events(1428393370)
[EPGC] next update in 60 min
[EPGC] start caching events(1428396970)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428396983)
[EPGC] stop caching events(1428396983)
[EPGC] next update in 60 min
[EPGC] start caching events(1428400583)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428400596)
[EPGC] stop caching events(1428400596)
[EPGC] next update in 60 min
Only way to solve this is on/off from power switch or Reboot via terminal. This same thing have been pain in the a** for a while now :)
Top-5 from top:
top - 13:51:47 up 2 days, 20:48, 1 user, load average: 1.07, 1.07, 1.05
Tasks: 89 total, 2 running, 87 sleeping, 0 stopped, 0 zombie
Cpu(s): 50.3%us, 1.0%sy, 0.7%ni, 47.7%id, 0.0%wa, 0.0%hi, 0.3%si, 0.0%st
Mem: 1155760k total, 212724k used, 943036k free, 1200k buffers
Swap: 0k total, 0k used, 0k free, 31272k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
31305 root 20 0 165m 88m 9.8m R 102 7.8 778:07.83 enigma2
31427 root 20 0 2724 1148 920 R 1 0.1 0:00.13 top
171 root 20 0 0 0 0 S 0 0.0 7:19.48 nx_sched_high_s
213 root 20 0 0 0 0 S 0 0.0 7:38.85 dvb
220 root 20 0 0 0 0 S 0 0.0 0:14.85 t110s
dmesg do not give any help, from end of the dmesg:
[ioctlAudio_SelectSource] (0) stream_source (0 -> 0)
[ioctlVideo_SelectSource] (0) stream_source (0 -> 0)
[video_policy2_write] policy(scale) not found
[video_policy2_write] policy(scale) not found
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 19:31:33 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 22:31:33
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 20:01:40 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 23:01:40
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 20:31:47 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/06 23:31:47
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 21:01:54 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 00:01:54
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 21:32:00 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 00:32:00
[fp_mcu_set_time_offset] rtc_offset = 10800
[fp_mcu_set_time] 2015/04/06 22:02:07 (rtc_offset = 10800)
[fp_mcu_set_time] Set local time => 2015/04/07 01:02:07
From end of the debug log:
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428389757)
[EPGC] stop caching events(1428389757)
[EPGC] next update in 60 min
[EPGC] start caching events(1428393357)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428393370)
[EPGC] stop caching events(1428393370)
[EPGC] next update in 60 min
[EPGC] start caching events(1428396970)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428396983)
[EPGC] stop caching events(1428396983)
[EPGC] next update in 60 min
[EPGC] start caching events(1428400583)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] abort non avail schedule reading
[EPGC] abort non avail schedule other reading
[EPGC] abort non avail netmed schedule reading
[EPGC] abort non avail netmed schedule other reading
[EPGC] abort non avail FreeSat schedule_other reading
[EPGC] abort non avail viasat reading
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
ERROR reading section - Value too large for defined data type
poll: unhandled POLLERR/HUP/NVAL for fd 28(8)
[EPGC] nownext finished(1428400596)
[EPGC] stop caching events(1428400596)
[EPGC] next update in 60 min