Help set up my tuners

[hassan56]

Hello!
I hope you can help with the, I'm in Cairo, Egypt, I have the following

1. VU+DUO2 Sat Receiver
2. STARGOLD FUJI Universal Prime Focus LNB
3. 180 cm motorized Dish
4. 100 cm fixed primesat dish for 7.0°W, Nilesat
5. Topfield satellite dish Positioners
6. Jaeger 24-inch actuators
7. Black Hole Vu+ Duo2 2.1.5

Help Please With Tuner Configuration Setup on VU+DUO2
What I would like to do is to view a channel, say from Tuner A and record from say, Tuner B
Thank you so much for your support

[abu baniaz]

I have moved your post to a thread of its own. Please do not be shy of starting new threads. There is no need to hijack another thread.

You do not select what tuner to view/record from. Enigma2 by default uses the tuner that leaves more options available unless you have altered the priorities. when you swotch you receiver on, and select a channel that is available on the fixed dish, that tuner will be used automaticaly. This leaves more options available to you.

The tuner with the fixed dish:
Set as Simple, Single, 7.0w

The tuner with the poitionbner:
You will have to set this as advanced and set the position numbers to match the positions stored on the positioner

[hassan56]

Hello!
I hope you can help with the, I'm in Cairo, Egypt, I have the following

1. VU+DUO2 Sat Receiver
2. STARGOLD FUJI Universal Prime Focus LNB
3. 180 cm motorized Dish
4. 100 cm fixed primesat dish for 7.0°W, Nilesat
5. Topfield satellite dish Positioners
6. Jaeger 24-inch actuators
7. Black Hole Vu+ Duo2 2.1.5

Help Please With Tuner Configuration Setup on VU+DUO2
What I would like to do is to view a channel, say from Tuner A and record from say, Tuner B
Thank you so much for your support

[hassan56]

Thank you so much for your support