abu baniaz
04-04-15, 02:44
As there has been some confusion/misunderstanding on how to connect cables on multiple tuner receivers on Terrestrial/Cable, I am posting this.
I shall start with an example that should be easy to understand, the use of a splitter. Unlike satellite (excluding unicable), on cable and terrestrial, all the channel signal is available. Unlike an LNB, on the aerial/DP there is no switching between high/low/horizontal/vertical. Each tuner can do whatever it needs to.
There is no loop through tuner configuration for DVB-T or DVB-C. You must configure each tuner individually.
44867
I shall start with an example that should be easy to understand, the use of a splitter. Unlike satellite (excluding unicable), on cable and terrestrial, all the channel signal is available. Unlike an LNB, on the aerial/DP there is no switching between high/low/horizontal/vertical. Each tuner can do whatever it needs to.
There is no loop through tuner configuration for DVB-T or DVB-C. You must configure each tuner individually.
44867