Stanman
25-03-15, 12:49
After some advice before I lose my marbles!!!!
Got sliding doors and followed instructions well except rather than making one door out of both A panels I used on one on each door.
The problem now is the doors do not fully open so internal draws will hit door if fitted.
Without taking everything off, is there an easy fix? both panels look exactly the same so that's my excuse and the crappy instructions:confused::confused:
They should be like this at 36 seconds but there is a 3 - 4 inch overhang
https://www.youtube.com/watch?v=R6r7Gr2tyw8
Got sliding doors and followed instructions well except rather than making one door out of both A panels I used on one on each door.
The problem now is the doors do not fully open so internal draws will hit door if fitted.
Without taking everything off, is there an easy fix? both panels look exactly the same so that's my excuse and the crappy instructions:confused::confused:
They should be like this at 36 seconds but there is a 3 - 4 inch overhang
https://www.youtube.com/watch?v=R6r7Gr2tyw8