PDA

View Full Version : USB Flash update


Hunty
06-03-15, 14:48
Hi All,
I am using a vu+duo on openvix. I have seen the green light flash when there is an update that does not require a USB flash and can do this all OK, but how do i know when and if there is USB flash to be done. I have tried the latest update but when the box reboots the green light is still there flashing??
A liitle help and guidance would be much appreciated.

Thanks
Hunty
abu baniaz
06-03-15, 16:16
Which image are you on please?

Please also note contents below


Thread will be moved to the ViX-Team-Images-Support-Discussion section. It is best to use the image support section for image issues as problems/solutions are usually the same irrespectve of receiver. It also helps others searching for the same issue although they may have another receiver.

Please read the thread in link below which explains things better.

http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section (http://www.world-of-satellite.com/showthread.php?33155-ALL-MEMBERS-PLEASE-READ!-New-method-of-posting-in-ViX-Support-Section)!

Please bear in mind for future support questions.
birdman
07-03-15, 02:37
... I have tried the latest update but when the box reboots the green light is still there flashing??
A liitle help and guidance would be much appreciated.Have a look at this thread:

http://www.world-of-satellite.com/showthread.php?44245-Permanent-1-Package-Update-Available
Hunty
09-03-15, 14:08
Hi Guys,

Sorry for the latye reply as wife planned supreise trip....
I am running 153 build but looking at the link i will follow the procedure and see what happens.

Thanks
Hunty
cactikid
09-03-15, 19:54
check downloads to see what number were at:D
riddick2099
21-03-15, 12:32
How to flash openvix on vu+uno. There is no boot_cfe_auto.jffs2 in the downloaded package. only a reboot.update
Larry-G
21-03-15, 12:36
Go to www.openvix.co.uk and download the image from there, you can also get a flashing tutorial from there too.
riddick2099
21-03-15, 12:44
I download the v1.55 extracted it to the usb stick. Power off the Box plug the usb in front. Start the box. there comes no message to push ch-. It starts the vti image. i can flash all other images with a boot_cfe_auto.jffs2 in the zip file. but in v 1.55 it is not in there.