View Full Version : Network
I'm using the BT HH5 router, in my receiver should I use DHCP or manually assign a static IP, whats the best option?
Manually assign is usually the best bet so the IP doesn't change, makes telnet/ftp/webif and so on a lot easier.
Set it to use DHCP first, then when it picks up the correct network settings, set Use DHCP to no (Menu -> Setup -> System -> Network -> Device setup -> Adapter settings), then just change the IP to a number out of range of your DHCP or a high number.
Another option would be on your router, lock the mac address of the Solo2 to a specific IP.
Manually assign is usually the best bet so the IP doesn't change, makes telnet/ftp/webif and so on a lot easier.
Set it to use DHCP first, then when it picks up the correct network settings, set Use DHCP to no (Menu -> Setup -> System -> Network -> Device setup -> Adapter settings), then just change the IP to a number out of range of your DHCP or a high number.
Another option would be on your router, lock the mac address of the Solo2 to a specific IP.
Thanks, I have now locked the receiver to use 192.168.1.71 IP by ticking Yes to 'Always use this IP address' in my router
http://ultraimg.com/images/359466ab48e.jpg
I'm using the BT HH5 router, in my receiver should I use DHCP or manually assign a static IP, whats the best option?My basic rule is
If it's a fixed device (TV, desktop, server, Blu-ray player, printer...) it gets a fixed (static) IP address which is outside of the router's DHCP range (so these systems never bother to make any DHCP requests).
If it's a mobile device ('phone, laptop...) it uses DHCP, but has an specific IP address allocated to its MAC address (this means they will use DHCP when out roaming...)
The rest of my DHCP range is left for occasional visitors.
My basic rule is
If it's a fixed device (TV, desktop, server, Blu-ray player, printer...) it gets a fixed (static) IP address which is outside of the router's DHCP range (so these systems never bother to make any DHCP requests).
If it's a mobile device ('phone, laptop...) it uses DHCP, but has an specific IP address allocated to its MAC address (this means they will use DHCP when out roaming...)
The rest of my DHCP range is left for occasional visitors.
My DHCP range is from 192.168.1.64 to 192.168.1.253, so that means I should set a static IP from 1-63?
My DHCP range is from 192.168.1.64 to 192.168.1.253, so that means I should set a static IP from 1-63?
If you were following my rules, then yes.
Although I'd also have narrowed the DHCP range, as there's no way I'd have 190 different mobile things connecting to it within 24 hours (or whatever your DHCP assignment timeout is).
I've set a static IP (192.168.1.60) in the receiver and it worked a few times as I have tested it by putting it in deep standby, turning it back on and gets connection straight away.
Turned it on this morning and it gets connection but no bytes received?
http://ultraimg.com/images/6c3fac.png
After restarting the network via the receiver,
http://ultraimg.com/images/714b54.png
Odd that the IP address and Nameserver are both listed as unconfirmed - and the latter stays that way even after a restart, which does set the IP address.
Do you have a nameserver IP address configured?
And when you first turn it (when the network fails) on does it know that it has an IP address configured?
Also, when you say "Turned it on this morning" - is that powering it on, or bringing it out of Deep Standby?
And if you were "turning it on", were you also "turning on the router" at the same time?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.