failed install

[bh161]

I have a TM 500. am having problems installing anything using UR server. I keep getting “Install failed. Please check available space. ” I have tried different images, both UR and iq with no luck. I have also done a fresh install. I have only used 6% of available space.

Any suggestions will be appreciated!

[Larry-G]

Is the UR server even still online ?, I would have though that had been closed down years ago, same goes for the IQ server as these are now really really old receivers and no longer has any one actively developing for them.

[bh161]

Any other other options available for TM 500s in terms of servers, images, ... ?

[Larry-G]

None that I can think of off the top of my head, It's been at least 4 years since I even powered my two TM-600's on and they were pretty much obsolete back then too.

[bh161]

The server seems to be online. Was working last year, if am not mistaken

[abu baniaz]

They forgot to renew the lease. Download last image and flash thorugh TCC

[bh161]

They forgot to renew the lease. Download last image and flash thorugh TCC

Tried what I thought was the latest image, same result. Please provide a link if you can

[abu baniaz]

Download from here.

http://www.downloadtmsw.com/bbs/main.php

[bh161]

Download from here.

http://www.downloadtmsw.com/bbs/main.php

Am going to try it:thumbsup:

[bh161]

Download from here.

http://www.downloadtmsw.com/bbs/main.php

It works :thumbsup:

Instuctions for anyone with similar problems/newbies


Add config files using miniweb
**************************
1. go to setup> expert setup> communication setup and get the ip address

2. switch tecnhomate off and on & hold power button before it comes on. keep holding the power button until the last part of the IP address comes on. eg “. 68”.
3. open the ip address in browser

4. delete the old config files and then add new ones, then save.

5. restart box


The TM500 super & TM600 use similar images.

Error message
***************
If you are getting “install failed. Check available space. ”, make sure you have the latest image. Try
http://downloadtmsw.com/bbs/list.php?board=tm600 for the latest images. Check the side panel for other images.

Updating firmware by cable & TCC
**********************************
1. to update with an image, use a combination of the blue null cable and/or a usb cable with a serial port. The cable & the box must be connected for the boot option to be present.

2. Put off the receiver, hold the volume up button on the receiver & restart the box.

3. Follow the instructions.

An update can also be done through miniweb or technomate control centre (TCC). If the update keeps stopping whilst using the miniweb & a phone, keep the screen on whilst the update is in progress.

Credentials
************
The default username for the box is “root”. The default password is empty/blank.

Access can be gained using an ftp client, telnet, etc using the credendials.