" Unable to handle kernel paging request", stuck on start

[halibatsuiba]

Howdy y'all

I have a genuine Solo2, about 1.5yrs old.
It started giving problems couple months ago. First it gave "Tune failed"-messages now and then and
now when I got back from christmas holiday "Tune failed" was a permanent situation. :mad:

Dish is not a problem, tested with another box and signal is almost perfect.

I flashed latest Openvix and now the box has starting problems.
It powers up but on TV there is only the splash screen saying "Loading".

In logfiles I found this:


CPU 0 Unable to handle kernel paging request at virtual address 0000009c, epc == e0face68, ra == e0e68c24
Oops[#1]:
Cpu 0
$ 0 : 00000000 10108700 e0face68 00000001
$ 4 : 00000000 cd1e5cd0 00000008 80400788
$ 8 : 80665700 80000008 800dcd44 fffffff8
$12 : 0000733c 81a0953c 81a095d8 005b0000
$16 : cd1e5cd0 00000000 00000001 00000001
$20 : cd089400 cd089594 20006f42 00000000
$24 : 005b75b0 e0e645d0
$28 : cd1e4000 cd1e5ca0 00000000 e0e68c24
Hi : 0000cb41
Lo : 31d94cec
epc : e0face68 NEXUS_Frontend_GetDiseqcSettings_impl+0x0/0x28 [dvb_bcm7356]
Tainted: P O
ra : e0e68c24 NEXUS_Frontend_GetDiseqcSettings+0x30/0x44 [dvb_bcm7356]
Status: 10108703 KERNEL EXL IE
Cause : 00800008
BadVA : 0000009c
PrId : 00025a11 (Brcm4380)
Modules linked in: fpga_directc(PO) brcmfb(O) dvb_bcm7356(PO) procmk(O) ipv6
Process enigma2 (pid: 826, threadinfo=cd1e4000, task=cc035178, tls=7773a490)
Stack : e180ab54 cd09de00 cf267c80 cd089400 00000000 cd1e5cd0 cd089594 e0dec710
cd089594 7fffffff 00000001 cf35de80 cf35de80 cd089594 40a86f3d 00000000
00000000 805641ac cd089804 20006f42 cf267c80 80400144 004b0000 cf267c80
80595cb8 803f5050 806d2db8 806d2db8 806d0000 cc0144a0 cd089594 cc035178
00000001 cf35de80 cf35de80 cd089594 40a86f3d 80565a70 cd1e5e14 cd1e5e68
...
Call Trace:
[<e0face68>] NEXUS_Frontend_GetDiseqcSettings_impl+0x0/0x28 [dvb_bcm7356]
[<e0e68c24>] NEXUS_Frontend_GetDiseqcSettings+0x30/0x44 [dvb_bcm7356]
[<e0dec710>] bcm7335_set_tone+0x3c/0x88 [dvb_bcm7356]
[<80400144>] dvb_frontend_ioctl_legacy+0x470/0xab4
[<80400854>] dvb_frontend_ioctl+0xcc/0xbd0
[<803f5858>] dvb_usercopy+0x120/0x210
[<800dc73c>] do_vfs_ioctl+0xa4/0x6ac
[<800dcd88>] sys_ioctl+0x44/0x8c
[<8000e17c>] stack_done+0x20/0x40


Any ideas how to fix this?
I have tried with older images too and they give same error.

Thanks
-MJ-

[Andy_Hazza]

'15 years old', the Solo2 ain't that old, a couple years maybe!! Is it a genuine or a clone box? Usually with tune failed its to do with f connectors/cabling issues but you say you have tried via another sat box?

[nsw9154]

Put your Glasses on Andy it says 1.5 years :D

How many cables do you have connected have you tried doing a Fresh flash without any backups sometimes certain plug ins can give you problems try removing some if you have any fitted of course

[halibatsuiba]

Put your Glasses on Andy it says 1.5 years :D

How many cables do you have connected have you tried doing a Fresh flash without any backups sometimes certain plug ins can give you problems try removing some if you have any fitted of course

I have tried with one, two and no cables connected.
Tried fresh flash with no backups, with new USB drive nothing but the upgrade files on it, disconnected HDD.

I just put my glasses on and re-read the log. There seems to be some kind of driver issue:


dvb_bcm7356: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint

Attached is the whole dmesg output.

[Andy_Hazza]

Put your Glasses on Andy it says 1.5 years :D

How many cables do you have connected have you tried doing a Fresh flash without any backups sometimes certain plug ins can give you problems try removing some if you have any fitted of course

lol. Oh its been a long day at work Norm. [emoji85]

[nsw9154]

lol. Oh its been a long day at work Norm. [emoji85]

And you have your NEW Solo2 to set up as well :cool:

[halibatsuiba]

Oh well.... I can't figure this out, time to take the original satellite box to use.
Funny how much dust things collect over two years time in storage.

What to do with dead Solo2? Nice box, could be nice to use as a case for media PC?

-MJ-